Hackintosh Olarila HackBeast GA Z590 Vision D with Thunderbolt - Full DSDT patches - Guide and Discussion

[Brendan McDonnell]

17 hours ago, MaLd0n said:

11th gen igpu dont work. we need one dgpu

I'm actually on 10th gen - know if there has been success there with the z590?

[MaLd0n]

7 hours ago, Brendan McDonnell said:

I'm actually on 10th gen - know if there has been success there with the z590?

many people report problem with 10gen igpu with chipset serie 500

[Brendan McDonnell]

On 8/12/2021 at 8:24 PM, MaLd0n said:

many people report problem with 10gen igpu with chipset serie 500

My 6900xt showed up so I'm all set, though I don't think I have full GPU acceleration - going to keep investigating there. But other then that I'm rock solid. Thank you for the DSDT

[hotboi]

Hi MaLd0n! Thanks for all your guides! I have sent you a donation. Can I please get a patched DSDT? I have tried to do everything to get ethernet (i225-V) working, but it just won't work. It shows connected and I get an ip from my router as well, but there is no internet connection. I need to use ethernet rather than wireless. Thanks for your help!

Z590 Vision D

Core i9 10850K

64GB Crucial Ballistix 3600

Sabrent 2TB Rocket NVMe

macOS 11.5.2

 

Generated file: https://www.dropbox.com/s/8gjn62k4d886kju/Send me iMac-Pro.zip?dl=0

 

 

5 minutes ago, hotboi said:

Hi MaLd0n! Thanks for all your guides! I have sent you a donation. Can I please get a patched DSDT? I have tried to do everything to get ethernet (i225-V) working, but it just won't work. It shows connected and I get an ip from my router as well, but there is no internet connection. I need to use ethernet rather than wireless. Thanks for your help!

Z590 Vision D

Core i9 10850K

64GB Crucial Ballistix 3600

Sabrent 2TB Rocket NVMe

macOS 11.5.2

 

Generated file: https://www.dropbox.com/s/8gjn62k4d886kju/Send me iMac-Pro.zip?dl=0

 

 

In case you need it, dGPU XFX Radeon 580 GTS XXX Edition 8 GB

[MaLd0n]

16 hours ago, hotboi said:

Hi MaLd0n!

check if work

Archive.zip

[hotboi]

4 hours ago, MaLd0n said:

check if work

Archive.zip 63.55 kB · 1 download

Do I need to change device id? or just add kext?

[MaLd0n]

add dsdt, remove ssdts and add kexts too

[hotboi]

I tried every way that was mentioned in this thread. No dice. Couldn't get it to work no matter what.

[hotboi]

What ACPI Quirks do I need? Anything in Booter or Kernel? Also, do I need to delete all other Device Properties since I am using DSDT?

Edited August 20, 2021 by hotboi

[MaLd0n]

with dsdt u dont need any device properties, ssdts, etc

post ur efi folder here

[hotboi]

1 hour ago, MaLd0n said:

with dsdt u dont need any device properties, ssdts, etc

post ur efi folder here

I downloaded this from HackinDROM tool. Thanks for your help!

EFI folder: https://www.dropbox.com/s/pkwjfk0mk1cvimi/EFI.zip?dl=0

[MaLd0n]

9 hours ago, hotboi said:

I downloaded this from HackinDROM tool. Thanks for your help!

first shot. don't change nothing. reset nvram first time

https://filebin.net/p8t1zlyqlndqrufi/EFI_01.zip

[hotboi]

On first shot no wireless or ethernet working. Ethernet get ip from router and dns, but no connection. Browser doesn't load page. Bluetooth connected AirPods, so bluetooth is working.

 

EDIT: Disabled FakePCIID.kext & FakePCIID_Intel_I225-V.kext. Configued IPv4 to Manually and Manually as well under Hardware tab, full-duplex, flow-control, then Internet works.

Edited August 20, 2021 by hotboi
Update

[MaLd0n]

good

[hotboi]

1 hour ago, MaLd0n said:

good

Anyway to get wireless working?

Also, if using DSDT why do we patch ACPI with RTC_STA? Just trying to learn.

And what does NVRAM LegacySchema settings do?

And why do we use 7,1 instead of 20,2?

 Thanks!!

Edited August 21, 2021 by hotboi
Update

[klbailey3]

i am having the problem with wifi/ether/blootooth like hotboi..

i followed his steps: EDIT: Disabled FakePCIID.kext & FakePCIID_Intel_I225-V.kext. Configued IPv4 to Manually and Manually as well under Hardware tab, full-duplex, flow-control, then Internet works.

My system still freezes when the ethernet cable is attached.

can anyone help?

[chwistophe]

hotboi  thank you, you save ma life ,

I had the same problem.

 

 

[klbailey3]

On 8/21/2021 at 11:08 AM, klbailey3 said:

i am having the problem with wifi/ether/blootooth like hotboi..

i followed his steps: EDIT: Disabled FakePCIID.kext & FakePCIID_Intel_I225-V.kext. Configued IPv4 to Manually and Manually as well under Hardware tab, full-duplex, flow-control, then Internet works.

My system still freezes when the ethernet cable is attached.

can anyone help?

disregard. everything is running great. I used the efi folder that was shared with hotboi, disabled FakePCIID.kext & FakePCIID_Intel_I225-V.kext. Wifi works..ethernet works even with DHCP..no freezing. UAD Apollo Twin and Oct Sat working! All good!

Thanks so much for providing all this great info!

[hotboi]

Yes, upon further inspection the culprit is in the Hardware tab. As long as you change the Hardware settings, you can leave IPv4 on DHCP.

[hotboi]

On 8/20/2021 at 6:45 AM, MaLd0n said:

first shot. don't change nothing. reset nvram first time

https://filebin.net/p8t1zlyqlndqrufi/EFI_01.zip

Any to get sleep working?