drteeth84 Posted August 7, 2012 Posted August 7, 2012 when i boot without wait=yes, the HFS+ files load, the extensions load, but then the comp restarts and I don't get the graphical installer interface. The comp just restarts and hangs there if i boot onto the HD. http://img41.imageshack.us/img41/3075/20120807202931.jpg thats the last page on wait=yes, after which i press spacebar, and then the system restarts.
Cassio Posted August 7, 2012 Author Posted August 7, 2012 Check if you have HPET and NX Bit (execute disable bit) enabled in BIOS. -Guides and Tutorials HERE -Hackintosh Tutorial Database - HERE -The largest EFI folder collection for Hackintosh HERE -Support Olarila Vanilla Hackintosh by making a donation HERE -Professional Consulting for macOS Hackintosh since 2006 HERE
drteeth84 Posted August 7, 2012 Posted August 7, 2012 THANK YOU now in the installer graphical interface
abc_sk2002 Posted August 8, 2012 Posted August 8, 2012 I have installed following the instruction and things got installed fine. But the only severe problem is that it is not identifying any network automatically and not able to connect to the internet thru my broadband. I tried to put all network parameters like ip, DNS, subnet mask, etc. in PPPoE connection, but no success. I am using this in Dual boot with Windows 7 and the same connection is working perfectly in Win 7. I request help from the forum on this.
khjz Posted August 8, 2012 Posted August 8, 2012 OK, my biggest doubt! I don't have a Hackintosh/Macintosh! I just have an access to a windows pc but i want to install chameleon to the usb drive! Is there any possibility that I could do that? Because chameleon installation wizards and stuff come in package format (A format which windows doesn't recognize) It just shows them as folders.
Cassio Posted August 8, 2012 Author Posted August 8, 2012 the only severe problem is that it is not identifying any network automatically and not able to connect to the internet thru my broadband. You need to install network kext http://Olarila.com/forum/viewtopic.php?f=18&t=1694 I just have an access to a windows pc but i want to install chameleon to the usb drive! Is there any possibility that I could do that? This .raw file is to be copied to USB using ImageWriter for Windows, bootloader is included. -Guides and Tutorials HERE -Hackintosh Tutorial Database - HERE -The largest EFI folder collection for Hackintosh HERE -Support Olarila Vanilla Hackintosh by making a donation HERE -Professional Consulting for macOS Hackintosh since 2006 HERE
unknet Posted August 8, 2012 Posted August 8, 2012 I have not access to imagewriter, and im trying to copy with dd. After copy at restart it says me "Missing operating system". I have checked hash for the file and recopy 3 times without success. Another way to copy the raw file? or there are any special options to copy with dd?
Cassio Posted August 8, 2012 Author Posted August 8, 2012 Are you using dd for Linux or Windows? Which options are you using? -Guides and Tutorials HERE -Hackintosh Tutorial Database - HERE -The largest EFI folder collection for Hackintosh HERE -Support Olarila Vanilla Hackintosh by making a donation HERE -Professional Consulting for macOS Hackintosh since 2006 HERE
unknet Posted August 8, 2012 Posted August 8, 2012 Im using it on linux. Im only use options if and of for input and output
Cassio Posted August 8, 2012 Author Posted August 8, 2012 Try to umount it first, then run dd sudo umount /dev/sdc1 sudo dd if=OS\ X\ 10.8\ Install\ USB.raw of=/dev/sdc bs=1m -Guides and Tutorials HERE -Hackintosh Tutorial Database - HERE -The largest EFI folder collection for Hackintosh HERE -Support Olarila Vanilla Hackintosh by making a donation HERE -Professional Consulting for macOS Hackintosh since 2006 HERE
unknet Posted August 8, 2012 Posted August 8, 2012 I'm trying your command. I'm checking with md5sum to test if dd has copied it correctly. Im checking this also http://en.opensuse.org/openSUSE:SUSE_Studio_Disc_Image_Howtos
unknet Posted August 8, 2012 Posted August 8, 2012 Finally I managed to boot from USB but I cant reach installation. My System System: DELL XPS1730 CPU=Intel® Core2 Duo CPU T9300 @ 2.50GHz Graphics= 2x Nvidia M8800GTX Using -f option I can reach ACPI: System State (S0 S3 S4 S5) (S3) and hangs. Other messages seen without -f No SMBIOS replacement found. ACPI table not found: DSDT.aml ACPI table not found: SSDY.aml ..... System uptime XXXXXX and hangs Any ideas?
Cassio Posted August 9, 2012 Author Posted August 9, 2012 Post a picture of the screen (normal boot). -Guides and Tutorials HERE -Hackintosh Tutorial Database - HERE -The largest EFI folder collection for Hackintosh HERE -Support Olarila Vanilla Hackintosh by making a donation HERE -Professional Consulting for macOS Hackintosh since 2006 HERE
Cassio Posted August 9, 2012 Author Posted August 9, 2012 Post 1 If you need, use TransMac to remove kexts which are causing problems (System/Library/Extensions) and use the flag -f (ignore caches) at boot, or remove /System/Library/Caches/com.apple.kext.caches/Startup/Extensions.mkext If you get KP related to ApplePolicyControl.kext remove /System/Library/Extensions/AppleGraphicsControl.kext/Contents/PlugIns/ApplePolicyControl.kext -Guides and Tutorials HERE -Hackintosh Tutorial Database - HERE -The largest EFI folder collection for Hackintosh HERE -Support Olarila Vanilla Hackintosh by making a donation HERE -Professional Consulting for macOS Hackintosh since 2006 HERE
Schatje Posted August 9, 2012 Posted August 9, 2012 Hi all... Just try install from USB, and success booting directly with HDD (after many error) Now i'm stuck on this http://s18.postimage.org/lsh9xba3b/2012_08_09_14_16_59.jpg http://s18.postimage.org/ltr7qqbx3/2012_08_09_14_17_20.jpg If i use -x on boot flag, it success Here is my Hardware lists http://s10.postimage.org/e0f54p3t3/2012_08_09_12_59_42.jpg
Peterag Posted August 9, 2012 Posted August 9, 2012 Installed Chameleon boot loader and tried to load ML from the Hard Disk, it is rebooting instantly after loading all kext. Please help. I am not able to enable wireless network in my machine. I tried several kext and nothing worked. My wireless card is broadcom BCM 4315. Please suggest a kext which will work on mountain lion.
unknet Posted August 9, 2012 Posted August 9, 2012 Post 1 I have removed the extension and started with but results are eactly the same. Starting with -f and extension removed get me stuck in ACPI (S1 S2 S3 S4) (S3)
Cassio Posted August 9, 2012 Author Posted August 9, 2012 Hi all... Just try install from USB, and success booting directly with HDD (after many error) Now i'm stuck on this http://s18.postimage.org/lsh9xba3b/2012_08_09_14_16_59.jpg http://s18.postimage.org/ltr7qqbx3/2012_08_09_14_17_20.jpg If i use -x on boot flag, it success Here is my Hardware lists http://s10.postimage.org/e0f54p3t3/2012_08_09_12_59_42.jpg Try moving video kexts http://Olarila.com/forum/viewtopic.php?f=27&t=1677 -Guides and Tutorials HERE -Hackintosh Tutorial Database - HERE -The largest EFI folder collection for Hackintosh HERE -Support Olarila Vanilla Hackintosh by making a donation HERE -Professional Consulting for macOS Hackintosh since 2006 HERE
Cassio Posted August 9, 2012 Author Posted August 9, 2012 I have removed the extension and started with but results are eactly the same. Starting with -f and extension removed get me stuck in ACPI (S1 S2 S3 S4) (S3) What if you remove /System/Library/Caches/com.apple.kext.caches/Startup/Extensions.mkext and boot without -f? -Guides and Tutorials HERE -Hackintosh Tutorial Database - HERE -The largest EFI folder collection for Hackintosh HERE -Support Olarila Vanilla Hackintosh by making a donation HERE -Professional Consulting for macOS Hackintosh since 2006 HERE
)
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now