OS X 10.8 Mountain Lion bootable USB

[artur-pt]

hello

have u disable the intel hd 4000 onboard in u bios ?

good hack

[Satellight]

Of course.

It has been enabled during installation only. BTW there's HD2500 Series which AFAIK is not compatible with MacOS X.

So, if it'll be useful I can tell my installation order:

1) Removed GTX 570 from PCI-E, switched to iGPU in BIOS

2) Booted from USB flash with GraphicsEnabler=No

3) Installed OS X 10.8.4

4) Switched to PCI-E GPU in BIOS, put GPU in place

5) Booted from USB to -s mode, removed all of the Intel, AMD and NVidia graphics kexts

6) Rebooted from USB to installed on HDD MacOS X and here troubles begins: I've got "NTFS Volume name bla-bla-bla".

I've tried GE=No/Yes, PCIRootUID=0/1, -v, -f in different combinations (bruteforce, yeah).

Any ideas?

[artur-pt]

hello

if u removed the nvidia kext.. and boot with a nvidia card ...? no sense..

must install the nvidia kext

and edit the NVDAGF100Hal.kext with u dev id

boot

-f -v

how to do it

http://Olarila.com/forum/viewtopic.php?f=28&t=154

in the bottom

replace

IOPCIPrimaryMatch

0x06e410de

with u dev id 0xbbbb10de

good hack

[Satellight]

Hello.

Sorry if it seems like I'm so stupid but I there's no 'IOPCIPrimaryMatch' key in my NVDAGF100HAL.kext/info.plist.

Do I have to add it at the bottom of this file?

[artur-pt]

hello

man rename the string

iopcimatch to iopciprimarymatch

good hack

[nemoryoliver]

Should I format my USB first to FAT before burning the Mac OSX for Intel PCs? Or is NTFS okay?

[navd]

GR8 FORUM.

Let me try to install ML on P9X79 Pro..

Get u the feedback

[nemoryoliver]

Mine says "Missing Operating System" after successful install. Chameleon bootloader is missing right? But problem is how can i install using chameleon bootloader without booting to Mac osx.. any suggestions please?

[artur-pt]

hello

read the guides...

how have u boot before ?

so do it again

good hack

[Satellight]

Hi.

Since my attempt to install hackintosh has failed, I beg you to give me step-by-step instructions or point out complete guide. My h/w config is written in my profile.

Thanks.

[artur-pt]

hello

the instructions are here ... in forum..

no step by step instalations...

u must read to understand what u are doing..

mac os x is for mac and developed exclusively for mac

hack mac os x is 99% of reading, googling, persistency and 1% of luck u hardware be compatible

u have the 1%.. so is in fault the 99%

good hack

[Cid K]

@ Cassio,

I manage to install OSX 10.8.4 and tried follow you guide...

OSX is installed on a separate drive theres 2 drives in my Asus N76VJ, 1TB for Windows and one 500GB for OSX. The OSX Drive been formated GPT and OSX Journaled.

The instal went perfectly, but now I'm trying to boot onto the newly installed OSX drive and it keeps blacking out at this point!! (See the attached pic)

Specs:

Asus N76VJ

core i7 - 3630QM

12 GB DDR3 1600

Nvdia 635m 2GB

I did remove all the kext that was suggested in this thread, not sure why its happening or what to fix it.

Please help

[artur-pt]

hello

is graphics

u have also intelhd4000 ?

if so see here

http://Olarila.com/forum/viewtopic.php?f=28&t=3111

and rename appleintel*capri*

boot again

-f GraphicsEnabler=No

good hack

[Cid K]

Yeah i have Intel 4000 HD plus Nvidia 635m Video cards.

I removed all the intel video kext and all the nvidia ones as well.

But how can i modifi anything in OSX, i mean i cant even boot to OSX right now....

[artur-pt]

hello

u remove from the installer.. not from the hd...

how do u removed from the installer ?

good hack

[Cid K]

Simple, i booted on Windows, i have paragon HFS+ for Windows, i just deleted all those kext from S / L / E stright from the HHD.... I tough that was the procedure ?

The OSX installation from the USB Drive went perfectly, now am trying to boot from that newly installed Drive. Do i need to let those kext files on the HHD and delete from the USB Installer ?

[macprox86]

hi

it seems that mountain bootable usb does not recognize my hard drive and in disk utility it shows me only the usb drive !!!!!!!!

please help me

can i install os x in another partition of the same hard drive which contains windows ????

exemple

c: windows

d: extended for windows

e: os x

[artur-pt]

hello

must be a primary partition..

good hack

[macprox86]

hello

must be a primary partition..

good hack

 

thank you for your answer

please look in what i have

in CMD i type "list partition" for "disk 0" (the only one i have ) and i have that :

partition 1 principale

partition 2 etendu

partition 3 logique

partition 4 pricipale ( the one i ve prepared to install osx in )

but the problem is : disk utility does not recognize the hole disk 0 : the only one in list is the usb drive !!!!!!!!!!!!

please help me out

[macprox86]

is there a problem with the SATA kext ( or something like that ) because the disk utility does not even recognize dvd player and i have only the usb drive !!!

[artur-pt]

hello

update in u profile > signature

something i have in the final my answer

post u full specifications

good hack

[macprox86]

hello

update in u profile > signature

something i have in the final my answer

post u full specifications

good hack

 

it s done

[artur-pt]

hello

have u check in bios u sets to ahci ?

i think can be a problem with xp...

ahci mode..

good hack

[macprox86]

hello

have u check in bios u sets to ahci ?

i think can be a problem with xp...

ahci mode..

good hack

 

did not understood

please explain more.....

[mendietinha]

check in the bios if the sata configuration is set to ahci, and not to ide. it cant be ide.