OS X 10.8 Mountain Lion bootable USB

[masteryono]

This does not help.

Post a picture of the screen.

[Cassio]

Are you using the pen drive image from this topic?

Are you booting from USB?

[masteryono]

Are you using the pen drive image from this topic?

Are you booting from USB?

Yes and Yes

edit: So can you help me? Please!

[Cassio]

Check your BIOS settings http://Olarila.com/forum/viewtopic.php?f=2&t=1804

I have no idea other than that. This error ("can't perform kext scan: no kext summary") usually happens with older bootloaders without ML support, which is not the case of the one included in the image.

[masteryono]

Check your BIOS settings http://Olarila.com/forum/viewtopic.php?f=2&t=1804

I have no idea other than that. This error ("can't perform kext scan: no kext summary") usually happens with older bootloaders without ML support, which is not the case of the one included in the image.

I dont see in bios options HPET mode..

[itzbilly]

Hi

Running into an issue, not sure what it is. Attached image of the problem.

When I first tried to run the installation from USB, I'm getting error of Policy Control so I removed the kext and redid the USB.

Then I ran into another issue: completely black screen. Nothing there, my monitor goes into sleep mode as if nothing is being transmitted from my video card.

So I tried removing the NVDA kexts and using GraphicsEnabler=No -f. Same screen.

I then saw that people were having issues with drives not being in AHCI mode. So I enabled AHCI and came to the screen shown in attached image.

It just sits there and doesn't move. Very strange, please help if you can.

Specs:

Gigabyte P35-DS3L

Intel Core 2 Quad Q9650

NVIDIA GeForce GTX 460

When I used SystemInformation (from this forum), it told me all my hardware was compatible.. please help, thanks in advance!

[artur-pt]

hello

try to boot

-f -v npci=0x2000 or npci=0x3000

good hack

[itzbilly]

Did -v graphicsenabler=no npci=0x2000 (and 3000) and got a white screen with a small grey square at top left corner

Edit: forgot -f. After adding -f, was able to load set up and install. At end of installation, got a white screen with a very light square in the middle-right side of the screen.

Edit2: never mind, set up didn't finish. Pressed esc and it went back to set up. I'm guessing that was the screen saver.

Edit3: OS X boot up! But I have to use the boot flags to get past PCI configuration. Tried running multi beast 5.2.1 but its telling me installation failed. Any ideas?

[artur-pt]

hello

see this

http://Olarila.com/forum/viewtopic.php?f=27&t=1716

good hack

[itzbilly]

After installing chameleon stuff, it runs through all the verbose stuff and then reboots to post... Help?

[artur-pt]

hello

have u read the post ??

hack mac os x is 99% of reading, googling, persistency and 1% of luck u hardware is compatible...

good hack

[itzbilly]

Yes, I have read the post and I appreciate your help. It's just a little difficult to follow everything that's going on in the posts when so many of the links bring up threads in another language (it looks like spanish?).

[artur-pt]

hello

no man is portuguese...

u have a good tool ( google translator )

good hack

[ivanstalony]

hey i have a question here :

1. i can't find AHCI option for my harddisk in bios, so can i install this without change that?

2. what bootCD i should use? can iBoot from tonycrap boot to FD?

thx in advance...and happy holiday from indonesia!

Edited December 21, 2012 by Guest

[pernacabeluda]

Hi,

1 - you can test.

2 - don't need boot cd, follow instructions on first post.

[rec4rx]

I just downloaded the *.raw file and finished copying it to a flash drive using suse. Booted the installation successfuly but when I was asked to choose where to install the OS X I cant find my Hard Drive. When I went to "disk utilities" all I can see is my 8GB flash drive, no internal Hard Drive. I also changed my HDD to AHCI... please help!

My Computer:

Mobile Intel GM45 Express Chipset

Intel Core 2 Duo P8600

2.00GHz (3MB L2 cache)

2GB DDRII 800Mhz (PC2-6400)

Intel GMA 4500MHD

[artur-pt]

hello

try to use this kext in system/library/extensions

http://www.insanelymac.com/forum/topic/88335-appleintelpiixata-kext-fully-working-for-all-ichx-mobo-all-sata-channels-working/

boot again

-f -v

good hack

[Kuvar]

I am using Dell Vostro 3550,i5-2500,ATI 6350 1GB

I installed Ml,It shown me Installation successfull but When I rebooted & Choose my MAC disk(Installed partiton) Its stucking at IOBluetoothcontroller,not gettin g what to do?

Already tried -x -f -v -F Alrdy Troubleshooted please help me.

I am Trying to dual boot with win 8,Windows on other partition is working fine but ML on Primary is not working.

[Cassio]

Try this http://Olarila.com/forum/viewtopic.php?f=27&t=1677

After doing all needed configuration you can restore kexts from backup http://Olarila.com/forum/viewtopic.php?f=18&t=736

[rec4rx]

hello

try to use this kext in system/library/extensions

http://www.insanelymac.com/forum/topic/88335-appleintelpiixata-kext-fully-working-for-all-ichx-mobo-all-sata-channels-working/

boot again

-f -v

good hack

 

Thanks,

But the IOATAfamily.kext was already included in System/Library/Extensions

Please help!

[artur-pt]

hello

the system kext is not working... no ?

so that one is a modified

good hack

[rec4rx]

Thanks for your reply ^^

I downloaded the IOATAFamily.kext_10.6.1_Universal_x32_x64.zip file, them extracted it, used transMac to replace this kext in System/Library/Extensions/ But sadly that nothing was changed when i reboot with -f

The Mac OS installer did not show any drive in my conputer... i try DU, but it only the USB...

I think it is not a suitable kext for my laptop.

Please help!

[pernacabeluda]

Hi,

inform the vendor and device ID of your ATA (IDE) controller.

http://Olarila.com/forum/viewtopic.php?f=18&t=63

[rec4rx]

Thank you,

Here is my System Info

Hope you can help me! ^ ^

[pernacabeluda]

Sorry, no idea, it's an Intel AHCI SATA controller, should work OOB.