OS X 10.8 Mountain Lion bootable USB

[artur-pt]

hi

man only thing i see in u signature is

x-treme

good hack

[uchandraul]

Hi, I am facing problem in installation OS X 10.8 Mountain Lion.

I tried-

1. (Without Redeon HD 6670 Graphics) Installation is successful but when I restart and Boot the USB drive, then choose to boot the HD, finally I get a white screen with apple logo and revolving cursor. After that nothing happens and this white screen remain for indefinite time. I tried GraphicsEnabler=No but situation remains as it was earlier.

2. With Redeon HD 6670 Graphics, As I boot the USB drive a flicker of white screen comes but then it goes and I get no video output on my LED. I tried GraphicsEnabler=No then a White screen with mouse cursor comes but then it remains for indefinite time. Nothing appears after that.

I Also Tried to above process with 8 GB and 4 GB Ram combinations but No Luck.

Plz help me, I posted earlier but couldn't get viable solution. My system config is attached in signature.

 

hi

read this

http://Olarila.com/forum/viewtopic.php?f=18&t=736

good hack

 

I think you haven't gone through my problem seriously. If I am not able to run one time mac on system after installation how can I edit chamelion.

[ferroca]

hi

try this

 

sudo pmset -a hibernatemode 0

 

sudo rm /private/var/vm/sleepimage

 

and disable sleep in system pref

power

good hack

 

Thanks I run this commands and disabled sleep the and the error "hibernate image is too old use forcewake=y" is gone but I still cant boot my mac os using chameleon when I select macosx in chameleon it restart again. I have to boot with bootble usb everytime.

plz help.

[artur-pt]

hi

have you installed chameleon loader in hdd ?

have u follow the post install ?

http://Olarila.com/forum/viewtopic.php?f=27&t=1716

see if follow that procedure

and post photo of the error

good hack

[ferroca]

hi

have you installed chameleon loader in hdd ?

have u follow the post install ?

http://Olarila.com/forum/viewtopic.php?f=27&t=1716

see if follow that procedure

and post photo of the error

good hack

 

I am dualbooting windows7 and hackintosh on single internal hdd.

First I had installed windows7 on one partition then I installed this macosx on other partition I installed chameleon on mac partition and followed all the steps u have said here viewtopic.php?f=27&t=1716

when I restart and select macosx partition and enter , it dont go to booting of macosx and shows one line of errorr but error vanishes veryfast from screen and my laptop restart. As error vanishes very fast it is not readable or clickable from camera.

[artur-pt]

hello

-v wait=yes

good hack

[ferroca]

hello

-v wait=yes

good hack

 

Thanks I have removed windows7 and installed only macosx and it worked without any booting problem but when I dual boot chameleon wont boot macosx. My problem is in dualbooting of win7 and macosx.

My mac partition is not flaged as primary that may be the reason.

Plz help me how to make the macosx partition as primary?

[artur-pt]

hi

man what i use is a HD in GUID partition

2 partitions

one for mac os x , format hfs+

and other with w7, format in fat32, using disk util from mac os x

in the partition for w7

insert u w7 media installer and only format the fat32 to ntfs, and install w7

if w7 fuck the boot of chameleon, only install again chameleon with the option boot0hfs

good hack

[ferroca]

hi

man what i use is a HD in GUID partition

2 partitions

one for mac os x , format hfs+

and other with w7, format in fat32, using disk util from mac os x

in the partition for w7

insert u w7 media installer and only format the fat32 to ntfs, and install w7

if w7 fuck the boot of chameleon, only install again chameleon with the option boot0hfs

good hack

 

Thanks artur-pt,

Successfully dualbooted win7 and macosx with bluetooth,internal speaker,trakpad,keybord working.

My laptop internal wifi card Intel Pro wireless 3945ABG not working.

I tried http://geeknizer.com/intel-3945abg-wireless-snow-leopard-hackintosh/ kext from here but not successfull.

help me plz.

[artur-pt]

hi

not supported the wifi

is the few things u can change in a notebook

or use a usb dongle

good hack

[the911mnm]

HELP PLEASE. I installed Mac but I wanted to remove it. I deleted the partition on my computer and restored my usb. I restarted my computer and now it wont boot to windows 7. Please help. I am using the pheonix bios. I am going to get in a lot of trouble if I don't get this fixed... thanks

[surya sadhu]

I completed the installation of ml and booted through the pendrive and selected the partion of ml but it loaded something and did get the gui but stops and in kernel screen !!! Please help me I have also lost my windows cause I erased it in disk utility in ml , so help me !!!

[ferroca]

HELP PLEASE. I installed Mac but I wanted to remove it. I deleted the partition on my computer and restored my usb. I restarted my computer and now it wont boot to windows 7. Please help. I am using the pheonix bios. I am going to get in a lot of trouble if I don't get this fixed... thanks

 

Use bootable win7 dvd and repair ur windows7.

It will fix the problem and you can boot into win7 again.

[ferroca]

I completed the installation of ml and booted through the pendrive and selected the partion of ml but it loaded something and did get the gui but stops and in kernel screen !!! Please help me I have also lost my windows cause I erased it in disk utility in ml , so help me !!!

 

boot in verbose mode using -v and tell the error messege shown on screen or post the error messege screen shot.

[surya sadhu]

here it is , please help , got no os on my drive!!!

[artur-pt]

hello

update in u profile u signature something i have in final my answer

use this

http://Olarila.com/forum/viewtopic.php?f=18&t=63

in the photo u post no error

good hack

[surya sadhu]

i get this error "transcript offline buffer pool allocate 181000 failed" and the system halts when booted to the installed ml on drive partition with -v GraphicsEnabler=No !!!

[artur-pt]

hello

man post u specs, update in u profile, signature u hardware, something like i have in final my answer

use this

http://Olarila.com/forum/viewtopic.php?f=18&t=63

post also a picture of that program with u hardware.

good hack

[ferroca]

I dont have battery icon and how many percentage battery remaining on the top status bar.

I go to 'energy saver' and check the 'show battery status in menu bar' but it untick itself.

How do I get the battery icon in top bar?

My copy,paste,move,select all, Ctlr+C, Ctlr+V, Ctrl+X and Ctrl+A shortcut not working.

plz help.

[hasnat]

Hey

I successfully boot from Mountain Lion bootable Usb.

It took 21 minutes to complete setup.

After finish i again boot from flash and select drive in which i insall Mac OS X Mountain Lion.

Mac OS X Load but after some loading in console Mode it stuck on that message..........

IOBluetothHCIController Start Completed

IOBluetothHCIController SetConfigState Calling RegisterService then Stuck after that hang.....!

I m noticing when i install Mac Os X then during installion show white screen when i press spacebar itx show progress bar of installation.

My Laptops Specs are

Dell Inspirion N4050

CPU Type Inter® Pentium® CPU B950 @ 2.10 GHZ

Fixed HDD 320 GB

System Memory 2048 MB (DDR3)

CPU Speed 2100 MHZ

I need the help of Techo Guys.........!

Anyone can give me solution.....?

Highly Appreciated!

Hasnat Ahmad Hussny