OS X 10.8 Mountain Lion bootable USB

[IlPrincipino]

It stops a lof of time in a screen saying:

"Kext com.apple.driver Apple Intel SNB Graphics FB start failed"

Then it advance and stops a lot of time in:

"NTFS volume New Volume, Version 3.1"

Then in advance and finally stop in:

"Apple P2A ALPSGlide Point"

[oldnapalm]

It stops a lof of time in a screen saying:

"Kext com.apple.driver Apple Intel SNB Graphics FB start failed"

Looks like you didn't move the video kexts correctly. Maybe you mistyped the commands.

http://Olarila.com/forum/viewtopic.php?f=27&t=1677

[invisiblelim]

Replace IOPCIFamily by this one http://Olarila.com/forum/viewtopic.php?f=27&t=1706

 

Thanks for the LInk,

I able to go thru "PCI configuration begin" now..

but currently i stuck at ApplePS2ALPSGlidePoint : Dictionary Object : HIDDefaultParameters Value : ??

[oldnapalm]

If boot stops right before reaching the installer, or graphics aren't working right, remove video kexts and boot with GraphicsEnabler=No -f

ATI = ATI*

Intel = AppleIntelHD* AppleIntelSNB*

nVidia = GeForce* NVDA*

[ojpd]

Hi guys,

Hopefully I'm in the right section. I have a question. What are C-States and P-states and do I need them?? I just finished installing ML and so far so good, finally got everything working including the detection of both my SLI'd GTX570 with full resolution and 3D working.

My processor is over clocked with the usual must turn off OC settings in the bios, C1E, Speedstep, turbo etc... Basically my only problem is with regards to C-States and P-states and do I need to enable them???

Hackrig is as follows:

Xeon X5677 @4.02

Gigabyte X58a-UD7

3 x Gskill Trident Extreme @ 1610

2 x Palit GTX570 Sonic Platinum

1 x WD 640 Black

Connected to my LED TV via (GPU1) DVI to HDMI (TV)

[oldnapalm]

Take a look here

http://Olarila.com/forum/viewtopic.php?f=18&t=1703

If you have questions, ask in that topic.

[uchandraul]

I have no problem till 2nd step - "...Wait for the installation to finish and restart".

But at 3rd step - 'Boot the USB drive, then choose to boot the HD you just installed OS X' . I got stuck. I choose to boot from HD then It starts booting and a white screen (some time with apple logo) comes with spinning cursor But after that nothing happens and after 5-10 minute same screen gets hang. Helm me to move further to next step.

My system config is Core i5-2400 and 8 GB RAM.

[rajinfinity]

hi everybody

i had downloaded the .raw (OS X 10.8 Mountain Lion bootable USB for Intel PCs) file and had copied it to usb drive via SUSE image writer currently on my pc windows 7 is installed and i need to know the procedure how to install it on pc just give me link aur website name where i can see the tutorial

[artur-pt]

hi

see this

http://Olarila.com/forum/viewtopic.php?f=27&t=1627

and this

http://Olarila.com/forum/viewtopic.php?f=27&t=1716

and insert u signature ( u hardware config in u profile ) something like i have in final of my answer

good hack

[oldnapalm]

I have no problem till 2nd step - "...Wait for the installation to finish and restart".

But at 3rd step - 'Boot the USB drive, then choose to boot the HD you just installed OS X' . I got stuck. I choose to boot from HD then It starts booting and a white screen (some time with apple logo) comes with spinning cursor But after that nothing happens and after 5-10 minute same screen gets hang. Helm me to move further to next step.

My system config is Core i5-2400 and 8 GB RAM.

What's your video card? It may be a video issue

http://Olarila.com/forum/viewtopic.php?f=27&t=1677

Try GraphicsEnabler=No

[rajinfinity]

had made an bootable usb but its not working on my pc but the same usb is working in my mac pro could any tell where i m doing mistake in that is there any changes required in bios setting if there than tell that also

thanks to all

[oldnapalm]

i need to know the procedure how to install it on pc just give me link aur website name where i can see the tutorial

The tutorial is on the first post of this topic.

 

had made an bootable usb but its not working on my pc

Saying it doesn't work is not enough, you have give more details. Post a picture of the screen.

[rajinfinity]

i had done using the way it has shown in the first post of the topic

firstly by Copying the .raw file to an USB stick using SUSE Studio Image Writer and that was succesful

the second one i can't understand

"Boot the USB drive and install"

becoz when i tried nothing happened it starts booting the windows 7 only

one thing more to tell i think there is changes needed to be done in bios setting but i can't find that setting to change here i am posting the images too could u tell how could i change the sata controller to ahci in my bios there is no option

my bios is BIOS: Phoenix - AwardBIOS 5.13, v6.00PG

[oldnapalm]

Set the USB as first in "hard drive BBS priority" (boot tab in BIOS).

[rajinfinity]

yes i had setted first booting device priority as cd rom with usb as priority booter it but now way it starts windows again

[oldnapalm]

Post a picture of BIOS boot tab.

[rajinfinity]

hii

i think u might be asking this pic am i right

[oldnapalm]

In "HDD Group Boot Priority" set the installer USB as first.

 

[rajinfinity]

ok thanks now it booted but now this problem occurs what to do

[ozmikeli]

Hey guys, after i installed my laptop is stopping at this screen. any ideas whats causing it?

i'm running a acer aspire v3-571g

[artur-pt]

hello

is graphics for both

what graphics card u have ?

good hack

[rajinfinity]

if u are asking me than i dont have graphics card installed in the pc my pc config. is below

[artur-pt]

hi

must have a graphics card....

use this to see

http://Olarila.com/forum/viewtopic.php?f=18&t=63

good hack

[oldnapalm]

See first post

If you get KP related to ApplePolicyControl.kext remove /System/Library/Extensions/AppleGraphicsControl.kext/Contents/PlugIns/ApplePolicyControl.kext

[rajinfinity]

i had deleted as u said above but the now this prob arises

tell me where i am doing wrong