Administrators MaLd0n Posted December 3, 2020 Administrators Posted December 3, 2020 DSDT.aml.zip touchscreen need check voodooi2c. use VoodooI2C.kext and VoodooI2CHID.kext if u use voodoops2 with VoodooInput.kext, remove this plugin inside VoodooI2C.kext to avoid conflict. both kexts have this plugin -Guides and Tutorials HERE -Hackintosh Tutorial Database - HERE -The largest EFI folder collection for Hackintosh HERE -Support Olarila Vanilla Hackintosh by making a donation HERE -Professional Hackintosh Support since 2006 HERE
Cao Dat Posted December 3, 2020 Author Posted December 3, 2020 (edited) When I put new DSDT, it shows error like this https://ibb.co/dL2yQRR Afterthat, panic like this https://ibb.co/6r3K63R but when I plug out charger, my laptop can power on by press power button, may be new DSDT it fixed the problem of not connect charger? Edited December 3, 2020 by Cao Dat
Administrators MaLd0n Posted December 3, 2020 Administrators Posted December 3, 2020 back to previous dsdt about charger i never see that. very strange problem post one photo in error screen with charger on -Guides and Tutorials HERE -Hackintosh Tutorial Database - HERE -The largest EFI folder collection for Hackintosh HERE -Support Olarila Vanilla Hackintosh by making a donation HERE -Professional Hackintosh Support since 2006 HERE
Cao Dat Posted December 3, 2020 Author Posted December 3, 2020 (edited) 30 minutes ago, MaLd0n said: back to previous dsdt about charger i never see that. very strange problem post one photo in error screen with charger on It means when my laptop completely turn off, I can not power on my laptop if not plug in the charger, as this picture: https://ibb.co/r78JQWW With your above DSDT, I can do that but unluckily it’s boot stuck For touch screen, I go inside to VoodooI2C kext —> Show Content —> Plug ins —> Delete voodooinput but still nothing change Edited December 3, 2020 by Cao Dat
Administrators MaLd0n Posted December 3, 2020 Administrators Posted December 3, 2020 post here dsdt working -Guides and Tutorials HERE -Hackintosh Tutorial Database - HERE -The largest EFI folder collection for Hackintosh HERE -Support Olarila Vanilla Hackintosh by making a donation HERE -Professional Hackintosh Support since 2006 HERE
Cao Dat Posted December 3, 2020 Author Posted December 3, 2020 34 minutes ago, MaLd0n said: post here dsdt working Here it is bro DSDT.aml.zip
Administrators MaLd0n Posted December 3, 2020 Administrators Posted December 3, 2020 check if work DSDT.aml.zip -Guides and Tutorials HERE -Hackintosh Tutorial Database - HERE -The largest EFI folder collection for Hackintosh HERE -Support Olarila Vanilla Hackintosh by making a donation HERE -Professional Hackintosh Support since 2006 HERE
Cao Dat Posted December 4, 2020 Author Posted December 4, 2020 Thank Maldon, I have tested DSDT file, system can boot, but the issue of can not turn on if not connect charger and no touchscreen still remain. I will spend weekend to test more. If you have any idea to modify DSDT to fix 02 above issue, please help me
Administrators MaLd0n Posted December 4, 2020 Administrators Posted December 4, 2020 50 minutes ago, Cao Dat said: I will spend weekend to test more. If you have any idea to modify DSDT to fix 02 above issue -Guides and Tutorials HERE -Hackintosh Tutorial Database - HERE -The largest EFI folder collection for Hackintosh HERE -Support Olarila Vanilla Hackintosh by making a donation HERE -Professional Hackintosh Support since 2006 HERE
Cao Dat Posted December 6, 2020 Author Posted December 6, 2020 (edited) On 12/4/2020 at 7:27 PM, MaLd0n said: All after hairs fallen, I've fixed the problem of lid wake/sleep wake --> It's by AAPL,ig-platform-id, the previous one I choose wrong (do not know why the screen can go inside), now I use the value 00001E19 --> It's run smoothly. For the problem when shut down laptop, if not connect charger can not turn on laptop by power button --> My battery health still 80%, I think research later because my laptop always go with charger. A little bit inconvenient by need charger the same as starter of car when laptop fully turn off, without starter no power on. Now remain only how to enable my ELAN Touch screen. I do not know just paste the kext to OC folder or need to do other steps more like PIN configure, SSDT GPI0, XOSI...? Could you please guide for me the way to enable it? Edited December 6, 2020 by Cao Dat
Administrators MaLd0n Posted December 6, 2020 Administrators Posted December 6, 2020 don't need xosi, u have it in native device save one ioreg -Guides and Tutorials HERE -Hackintosh Tutorial Database - HERE -The largest EFI folder collection for Hackintosh HERE -Support Olarila Vanilla Hackintosh by making a donation HERE -Professional Hackintosh Support since 2006 HERE
Cao Dat Posted December 6, 2020 Author Posted December 6, 2020 (edited) Just now, MaLd0n said: don't need xosi, u have it in native device save one ioreg Here it is bro, also I send Runme file. Please help me review to enable touch screen. https://mega.nz/file/lAV0UbQC#2JIT8PVIK1jad5fd3k7yAOn-4kw5TJECsr1_S7z-tU0 Edited December 6, 2020 by Cao Dat
Administrators MaLd0n Posted December 6, 2020 Administrators Posted December 6, 2020 add these kexts Archive.zip -Guides and Tutorials HERE -Hackintosh Tutorial Database - HERE -The largest EFI folder collection for Hackintosh HERE -Support Olarila Vanilla Hackintosh by making a donation HERE -Professional Hackintosh Support since 2006 HERE
Cao Dat Posted December 6, 2020 Author Posted December 6, 2020 36 minutes ago, MaLd0n said: add these kexts Archive.zip 135.14 kB · 2 downloads Still can not use touch screen bro. I upload Ioreg and Send me file after copy kext and picture to check loading of Gen i2c app. Tien’s MacBook Pro.zip Send me Tiens-MacBook-Pro.zip Screen Shot 2020-12-06 at 7.30.34 PM.zip
Administrators MaLd0n Posted December 6, 2020 Administrators Posted December 6, 2020 this trackpad load inside usb. idk if work -Guides and Tutorials HERE -Hackintosh Tutorial Database - HERE -The largest EFI folder collection for Hackintosh HERE -Support Olarila Vanilla Hackintosh by making a donation HERE -Professional Hackintosh Support since 2006 HERE
Cao Dat Posted December 6, 2020 Author Posted December 6, 2020 (edited) 3 hours ago, MaLd0n said: this trackpad load inside usb. idk if work What does idk mean? Edited December 6, 2020 by Cao Dat 1
Administrators MaLd0n Posted December 6, 2020 Administrators Posted December 6, 2020 i dont know -Guides and Tutorials HERE -Hackintosh Tutorial Database - HERE -The largest EFI folder collection for Hackintosh HERE -Support Olarila Vanilla Hackintosh by making a donation HERE -Professional Hackintosh Support since 2006 HERE
Cao Dat Posted December 7, 2020 Author Posted December 7, 2020 9 hours ago, MaLd0n said: i dont know ? Please help me, I ask because I really do not know that word. When I put the kext, touch pad ok, recognize. but for touch screen, do you think that need to set up Pin configurator?
Administrators MaLd0n Posted December 7, 2020 Administrators Posted December 7, 2020 6 hours ago, Cao Dat said: ?but for touch screen, do you think that need to set up Pin configurator? usb devices in many cases just need kexts inside bootloader folder -Guides and Tutorials HERE -Hackintosh Tutorial Database - HERE -The largest EFI folder collection for Hackintosh HERE -Support Olarila Vanilla Hackintosh by making a donation HERE -Professional Hackintosh Support since 2006 HERE
Cao Dat Posted December 7, 2020 Author Posted December 7, 2020 (edited) 19 minutes ago, MaLd0n said: usb devices in many cases just need kexts inside bootloader folder In Catalina, I can go over by put VoodooI2C and VoodooI2C HID into Library/Extention. May be that way support to load kext into bootloader. But in Big Sur, may be Apple lock to put kext into LE Edited December 7, 2020 by Cao Dat
Recommended Posts