Big Sur Installer boot stuck

[Olaf Kosowski]

Hi, it's my first post on this forum, so forgive me, if I put it into a wrong place. I'm total amateur, so I have to do everything step-by-step, like a noob.
From a few days 'm trying to set up Big Sur Hackintosh (previously I used Catalina made with Uni and Multi-beast, but I don't wanna use Tonymacx86's tools- I think, that You know why)
I used a config.plist and boot loader downloaded from: https://www.olarila.com/topic/10934-guide-new-clover-bootloader-integration-quirks-configuration/ and MacOS installer downloaded from AppStore and ported to USB via terminal. 
after downloading I edited config.plist, changed SMBIOS to iMac 17,1", set FakeCPUID to 0x0306A0 (wich I use always, because it usually works with my G4560) added kexts required for my cpu (NullCPUpowerManagement). Then I changed in EFI folder drivers from HFSPlus.efi to VBoxHFS, because my computer didn't want to boot with regular Hfsplus.efi. 

Clover boots successfully, but after chosing "Install macOS Big Sur" in boot options, loading in -v stucks at "handle_mount:633: setting dev block size to 4096 from 512", sometimes at "nx_volume_group_update:6775: Volume macOS Base System is not in a Volume group' Idk what do I have to do, because it's not an error communicate. In the attachment I send you my EFI folder via Google Drivehttps://drive.google.com/file/d/1Gv0kFQVtj-XHigeMqIuEqPxNi0AUHM8m/view?usp=sharing

Specs: 
-Asus H110M-K mobo
-Intel G4560 Pentium Kaby Lake CPU
-NVidia GT710 GPU (When I was using Catalina I forced it to work properly, honestly I don't remember how)
-Configured for Hackintoshing BIOS

Can You help me?
 

Edited November 16, 2020 by Olaf Kosowski

[MaLd0n]

https://www.olarila.com/topic/5676-folders-for-all-chipsets-clover-and-opencore/

u need a fakecpuid

[Olaf Kosowski]

in clover configurator I'm putting the fakecpuid 0x0306A0
it doesn't work, still the same problem
maybe I have to add kext/driver for fakecpuid in clover? 
I used exactly the same folder you linked (Kaby Lake)
Thanks for your answer

[MaLd0n]

7 hours ago, Olaf Kosowski said:

in clover configurator I'm putting the fakecpuid 0x0306A0

post one photo in error screen

[Olaf Kosowski]

I made my USB once again, with Olarila EFI files too, with setting my fake CPUID and injecting NullCPUPowerManagement.kext (required for G4560), and SMBIOS to iMacPro 1,1;  and now I've got kernel panic (hi res photo in the link https://drive.google.com/file/d/1-XTf11Mf9vg_DzBOA260UHjM7OjE3X7f/view?usp=sharing )

[MaLd0n]

u inject correct properties cpuid?

[Olaf Kosowski]

yes, 0x0306A0 (this one was working well on Catalina, the same build, some time ago) in config.plist, checked in clover before boot. Maybe I need additional kext/driver for that?

[MaLd0n]

19 minutes ago, Olaf Kosowski said:

Maybe I need additional kext/driver for that?

no

need fakecpuid and correct quirks for clover or opencore

[Olaf Kosowski]

I used this https://tinyurl.com/ybr968w3 from Olarila.com for 
Kaby Lake

i also tried to use config.plist from here 

with modifications for G4560 (fake Cupid) and still fail

[Olaf Kosowski]

Well; I'm near of making it work (I wish). I installed Catalina, and then ran "Install Big Sur.app". Everything was ok until reboot- I've had to update my clover (to 5123.1, because the newest didn't want to work), deleted AptioMemoryFix.kext and replaced it with OcQuirks.kext. 
With Aptio my Catalina partition boots up, with QcQuirks it doesn't want to boot up, so I have to adjust quirks for my pc. Standard quirks from here doesn't work and are making my kernel panic 

 

[MaLd0n]

check correct quirks config in sanity checker

https://opencore.slowgeek.com/

[ManasMalla]

On 11/18/2020 at 7:14 PM, Olaf Kosowski said:

I made my USB once again, with Olarila EFI files too, with setting my fake CPUID and injecting NullCPUPowerManagement.kext (required for G4560), and SMBIOS to iMacPro 1,1;  and now I've got kernel panic (hi res photo in the link https://drive.google.com/file/d/1-XTf11Mf9vg_DzBOA260UHjM7OjE3X7f/view?usp=sharing )

Getting the same issue, I am on a Pentium G4600, Nvidia 710 and added the fakecpuid 0x0306A0via Clover configurator in the config.plist, added the fakepciid kext, yet the same issue. I am on Clover r5127 and trying to boot macOS Big Sur. Help asap would be appreciated.

Edited December 31, 2020 by ManasMalla
Added Clover revision details