xwajuk

Problem solved. The reason was Bios option "Press F1 if error" -> Disable. And the error was "CPU Fan Error". Fan works but displays error.

Just a moment ago I have updated Bios. Still no result. Need to enter Bios and select EFI boot partition manually as always before. What if mainboard is damaged?

Still no result. Anything else? Clover EFI is set as primary boot. I have Cleared Secure Boot Keys.

I missed this yesterday Do you mean Clear Secure Boot Keys or PK/KEK/DB Management? https://photos.app.goo.gl/F8xUJDZKtSAkvLG87 I guess this is correct: https://photos.app.goo.gl/B4unkdWmBVvQRoU96

I know this option and i set it days ago. Today set: https://photos.app.goo.gl/7HxMGfJGgZuDSHBp7

Bios is set as you recommended at screens. I tested CLOVER files you attached. It didn't help. Still need to enter Bios to select EFI boot disk. Added in 6 minutes 13 seconds: Also didn't help.

How to replace DSDT.aml? I guess using Clover Configurator but how?

Thanks erroruser File: https://www.dropbox.com/s/4rfnwozc0cc0hch/Send%20me%20iMac-Krzysztof.zip?dl=0 I also donated by Paypal Added in 9 minutes 52 seconds: BTW + more information. Before installation: I added two files to pendrive EmuVariableUefi-64 OsxAptioFix2Drv-free2000 deleted 1 file AptioMemoryFix64 My Asus Z390 has no native support for NVRAM (installation crashed 1 min before finish with no these 2 drivers/kexts) After installation: I replaced AppleALC to newer version 1.3.5 to lunch sound. 1.3.4 doesn't support my ALC S1200A.

Hi I bought new PC and have installed Mojave from Olarilla image. Anything works well expect one thing. Each time I start my PC it doesn't load Clover automatic. I have to enter Bios (F1) and select Boot (F8) then select EFI partition to start system loading. It is annoying. How to fix it? Bios configuration is Default. It displays EFI partition as primary to load system but it doesn't load system automatic. See attached Bios screens: https://photos.app.goo.gl/vYUwfDms2SyuvMDYA https://photos.app.goo.gl/mS9ASEYWpSxjFqTs7 https://photos.app.goo.gl/S2bQTPKfLXnrscU77 https://photos.app.goo.gl/V8f8CD9sAjcmyZMh6 Asus TUF Z390-Plus Gaming i7 8700 16 GB 3200 MHz Sapphire RX 580 4 GB Samsung EVO 970 250 GB

At first time, before I replaced CLOVER folder at USB stick I run installation and it crashed at the end shown at screen. So raw Olarila image doesn't have it Added in 11 minutes 6 seconds: Today I found this guide: https://github.com/cmer/gigabyte-z390-aorus-master-hackintosh/blob/master/STEP_BY_STEP.md Section: Fixing Kernel Panics at Reboot/Shutdown Author says that NVRAM is not natively working on Z390 motherboard. I realise it is Gigabyte and I have Asus. But both are very similar Z390's motherboards. Quote author: When I added EmuVariableUefi-64.efi to /EFI/CLOVER/drivers64UEFI , I got a crash at bootup. The solution to that crash is to remove AptioMemoryFix-64.efi and to replace it with OsxAptioFix2Drv-free2000.efi. Does it make sense?

Hi As you wrote here: 1. I have downloaded Olarila Image - Mojave 10.14.3 https://drive.google.com/file/d/1malP3BGbC6coziRouv4mnqmJBcY1jFVY/view?usp=sharing 2. Unzipped and burned at my 16GB USB stick 3. Replaced Clover folder to this https://Olarila.com/files/Clover.Folder/CLOVER.SERIES.100.200.300.zip 4. Run installation at my machine - configuration below 5. Result is frozen mouse cursor / screen at last minute of installation Verbose error screen: https://www.dropbox.com/s/7mp59vvr7ogo2jp/hck_screen_error_10mar.jpg?dl=0 What is reason of it? And how to fix it? At local Hackintosh forum someone said that it might be unsupported NVRAM by Z390 chipset. I'd like to confirm it here - this forum seems to be much more professional My configuration: * Asus Prime Z390-Plus Gaming * Intel i7 8700 * 16GB 3200MHz CL16 Predator * Sapphire Radeon RX 580 4GB Nitro+ (currently power cables are disconnected, I use GPU for installation time. Is it necessary?) * Samsung 970 Evo M.2 250GB * 600W powed supply Bios configuration taken from this video: ">