Morselina

[ref]remozica[/ref], Have you tried Hackintool ?

[ref]erroruser[/ref], ok thanks, i have sent maldon a dsdt request and when dsdt is ready will try it

[ref]MaLd0n[/ref], pls make me DSDT for running integrated Intel HD 630 unter Mojave. ErrorUser suggests DSDT request Added in 55 seconds: [ref]Mateus19[/ref], the patched dsdt will need to be in the efi/efi/clover/acpi/patched folder Send me Morselinas-MacBook-Pro.zip

[ref]erroruser[/ref], I have tried but get stuck on IOConsoleUsers: gIOScreenLockState 3, hs 0, bs 0, now 0, sm 0x0 and black screen. Backed UP Clover, then deleted Clover and replaced with your Clover. With Original Config and modified with 0x0000130B ig_platform_id same result - black screen Do you have other clover to try or only dsdt patch will help me, so i should request one ?

Here you are - nice tool btw Added in 1 minute 31 seconds: [ref]erroruser[/ref], is this enough or I should send something more ? Added in 2 minutes 12 seconds: btw I use config3.plist from clover dir with ig_platform_id = 0x0000130B Send me Ivans-MacBook-Pro.zip

[ref]remozica[/ref], any success and do you use fakeid / ig_platform_id with WhateverGreen ?

[ref]erroruser[/ref], [ref]MaLd0n[/ref], I think I am very close to the final solution - I have done a little bit of experimentation with different configs and framebuffers and discovered that if I dont have ig_platform_id/fakeid 3D acceleration and WhateverGreen (for more VRAM) is starting but i get stuck on IOConsoleUsers: gIOScreenLockState 3, hs 0, bs 0, now 0, sm 0x0 and black screen. Otherwise i can boot Mojave, without 3D acceleration and only 7VRAM. Any possible solution to boot Mojave with 3D acceleration ? PS : Attached configs work but only with ig_platform_id = 0x12345678 or 0x0000130B config.txt config4.txt

[ref]remozica[/ref], As far as i know , an alternative is to use nv_disable=1 in clover boot options. You can try -x for safe boot also. If you succeed with 1536 MB VRAM pls share how you made it, because i have same processor and same HD 630 and stuck on 7MB VRAM for days. Added in 1 minute 44 seconds: Btw it is highly strange - Mojave for me is fast, no lags and works good but only with 7MB VRAM ???

[ref]remozica[/ref], btw i use external usb wifi dongle tp-link which has drivers for High Sierra and Mojave and 300 MPBS Max speed and works perfect - otherwise no wifi, no nvidia also. I think you should try to disable nvidia in bios, otherwise problems can occur, if you have the option in BIOS. Added in 1 minute 20 seconds: NVidia and Wifi+BT 100% not supported in MacOS HIgh Sierra and Mojave

[ref]remozica[/ref], same problem, but only for Mojave. With High Sierra I get 1536 VRAM Probably you need framebuffer patching, disable NVidia (which is not supported) Added in 1 minute 44 seconds: [ref]MaLd0n[/ref], give more details for framebuffer patching, is there alternative program, because i cannot get full combos to make the patch ?

[ref]erroruser[/ref], I have NVidia GTX 1050Ti , but I have disabled the card and am using only integrated Intel HD Graphics 630, which is supported in Mojave. I had 1536 VRAM in High Sierra, but only 7MB VRAM in Mojave and the combos in hackintool are empty to be able to configure video framebuffer patching

[ref]MaLd0n[/ref], tried but same result, empty combos and no patching possible, see screenshots - any ideas ? Added in 1 minute 20 seconds: As shown battery works, NTFS using clover configurator also works. Only RAM is 7MB, but this is the most important

[ref]MaLd0n[/ref], Any suggestions what i should try next - unfortunately all fields in hackingtool are empty and i cannot generate patch. Even if i could how to use the patch ?

An Update : I have found out that battery is not recognised by Mojave and cannot enable battery status Added in 5 minutes 30 seconds: I have tried hackintool, but all fields are empty- intel gen, platform id, cannot generate patch ... Added in 3 minutes 13 seconds: Btw I have found something useful, but don't know how to fully use it. FakeID and platform work, but again 7MB VRAM. Maybe the key is in the other text : ID: 591B0000, STOLEN: 38 MB, FBMEM: 21 MB, VRAM: 1536 MB, Flags: 0x0000130B TOTAL STOLEN: 39 MB, TOTAL CURSOR: 1 MB (1572864 bytes), MAX STOLEN: 136 MB, MAX OVERALL: 137 MB (144191488 bytes) GPU Name: Intel HD Graphics 630 Model Name(s): MacBookPro14,3 Camelia: Disabled, Freq: 1388 Hz, FreqMax: 1388 Hz Mobile: 1, PipeCount: 3, PortCount: 3, FBMemoryCount: 3 [0] busId: 0x00, pipe: 8, type: 0x00000002, flags: 0x00000098 - LVDS [2] busId: 0x04, pipe: 10, type: 0x00000800, flags: 0x00000187 - HDMI [3] busId: 0x06, pipe: 10, type: 0x00000400, flags: 0x00000187 - DP 00000800 02000000 98000000 02040A00 00080000 87010000 03060A00 00040000 87010000

[ref]MaLd0n[/ref], can you pls give me details for the easiest way to create video framebuffer patch to have 1536 VRAM, because i have tried several fake id and fake ig_platform_id and no success at all - only 7 MB VRAM If there is a video i will highly appreciate it Many thanks in advance !

[ref]MaLd0n[/ref], finally after many efforts I have managed to boot and install Mojave 10.14.3 using the following (to help others with similar problem) : *Burn the img of Olarila Mojave 10.14.3 to the flash drive *copy EmuVariableUefi-64.efi and OsxAptioFix3Drv-64.efi to Drivers64UEFI folder *remove AptioMemoryFix-64.efi (only 1 memory fix at a time) *MOST IMPORTANT -> copied the config from MaLd0n as Config3.plist *Added -x nv_disable=1 and fake_id = 0x12345678 and ig_platform_id = 0x12345678 *Booted installer ALSO IMPORTANT -> When i installer over High Sierra I stuck in installer errors with log, so i reformated my drive and did clean install and it worked. PROBLEMS SO FAR: 1) But using ig_platform_id I have now 7MB VRAM -> See attached picture 2) NTFS of my HDD is not recognized Any suggestions how to fix the problems? Many Many thanks in advance! I would'n have succeeded without your help!!! Added in 34 minutes 30 seconds: One more problem USB 3 are not working

[ref]ziomalex[/ref], https://Olarila.com/forum/viewtopic.php?t=8849&start=20 See my latest post by this time. I have managed to install Mojave 10.14.3 but only with 7VRAM, because of fakeid's. My HTFS drives are not recognized. So i wait for responses to complete Mojave installation. See also all posts to locate the archive with config.plist, which was sent to me Hope it will work for you too

Thanks for the upload. In order to avoid confusion - I should place only one AptioDriver + Emuvariable in order to work - is that right or I shall use drivers64uefi folder with all drivers. And should I use -x boot flag and nv_disable=1 and fake platform id with aptio drivers. So i will have 4 possible combinations, one of which should work

[ref]erroruser[/ref], i have tried your suggestion. As a result i get the same error for which I started the topic IOConsoleUsers: gIOScreenLockState 3, hs 0, bs 0, now 0, sm 0x0. So i tried with the -x flag to boot in save mode. This resulted in kernel panic. Fresh burned img to flash drive with -> nv_disable=1 and -x added => kernel panic Any suggestions? Thanks in advance for your effort!

[ref]erroruser[/ref], you suggest that i should not use CLOVER.NOTEBOOKS.100.200.300 for the installer, but only to try to boot Mojave with burned img to the flash drive with nv-disable = 1 and fake ig_platform_id (not fake id for cpu). No replacement of clover folders at all?

[ref]erroruser[/ref], You mean I cannot use Mojave on my laptop with my integrated graphics card Intel HD Graphics 630 ? I have been told that Mojave will work on HD 630 and that NVIDIA 1050TI for Notebooks is not supported(Optimus)

[ref]MaLd0n[/ref], i have starter with a clean installation of the Olarila Mojave 10.14.3 image to the flash drive. Than I have replaced the files of clover folder with your files. After that i stuck on row of plus signs +++++++++++++. When I try to boot High Sierra with your config same result. I than replaced the clover files with the files from 100 200 300 notebooks file - same result row of plus signs +++++++++++++. Greater problem - I cannot select boot flags in this new clover, which you have sent me - boot flag gets selected and nothing responds anymore ... What to try next ? Thanks in advance for your effort !

[ref]MaLd0n[/ref], ok i will start clean, will format the flash drive fresh and then will overwrite clover files with yours and see the result after i come back to my laptop. Will post a reply later

[ref]ziomalex[/ref], you are lucky I have similar issue with mi integrated graphics card - also HD630. High Sierra run perfect, but when i tried to boot Mojave 10.14.3 i can't even reach the installer -> in safe mode i reach only kernel panics (you can see my thread). I have been told than Mojave should work fine with HD630 with full graphics acceleration, but i don't know how to achieve this. Will follow your thread, because what helps you can help me and vice versa How do you managed to boot Mojave - via the Olarila Mojave 10.14.3 image and config for notebook 100 200 300, or other config ? Added in 4 minutes 43 seconds: Btw I know a russian hackintosher, which will make this for me for 35 Euro, but i don't know is it worth?

[ref]MaLd0n[/ref], thank you very much for clover folder. Unfortunately I have messed up my Mojave Installation Flash Drive and should start from beginning but I have encountered now strange error in Verbose Output -> rather than kernel panic now i get Architecture Not Supported How is the cleanest way to start over and clean with Mojave installation -> Format USB Drive with the Mojave iso provided from you -> replace the Clover Folder Files with the files from the clover folder for notebooks 100 200 300 Kaby Lake -> Then another replace with your folder or directly to replaces files from the original format with your folder ? Thanks very much in advance for your effort and time !