sparky2k

Hi, Thanks that worked, quickly held down key "1" after selecting my USB boot device and in the Chameleon bootloader. Think I'll stay with Chameleon then, always used it fine before on my older hackintosh/Windows system on Snow Leopard. Installer loaded fine too, only have snow problem over DVI via KVM switch, think had it before, does OS X enabled HDCP that my KVM may not support? It works fine normally if I connect to my monitor's HDMI port instead.

Hi, I've been trying to write the image to an SD card and a 8GB Buffalo USB stick. Both produce the following when selecting it as the boot device from BIOS F8 key: boot0: test boot0: done then nothing. I tried setting the partition active that was created from the image on the USB device but no change. Do I need to change any other BIOS settings or try another image writer other than SuSE Studio? It appears to work fine and files appear in HFS+ partition. Do I need boot1h or other files mentioned and copy with transmac from somewhere to the USB stick? My system: Asus P8Z68 Deluxe/Gen3 Bios 3603; Intel i7-2600K; 16GB RAM; OCZ SSD and standard hard drives; Soundblaster X-Fi Fatal1ty sound card; Nvidia GeForce GTX 570 graphics card.