Mister3000
-
Posts
25 -
Joined
-
Last visited
Everything posted by Mister3000
-
Do you think there is a way to get this fix, or should i downgrade to Sierra ? Thanks
-
@MaLd0n Thank you for your EFI folder. tried it but the sleep/shutdown still doesn't work. when i select reboot it works fine, but shutdown gets me a verbose output and then it goes to a black screen and the fan goes loud. Very frustrating. !! Can we try something else ?
-
@MaLd0n Thank you for your reply.. Here is my send me dump.. https://filebin.net/lwy0cpu27syof60v
-
hello everyone.. My system is been working fine with the DSDT provided by me on this site after my donation and all tweaks. Only issue is that shutdown/sleep still doesnt work. Im hoping a fix has been found by now.. I have tried a lot of different tricks but shutdown/sleep under High Sierra still not working. any suggestions ? Do I need to run the rumme.app again ? Thanks
-
Ok, thank you. You have any ideas to resolve my shutdown and sleep problem ?
-
Hey mald0n.. Please don’t forget about me. Using your first dsdt my battery now works but Still the computer freezes with sleep And shut down. I’ve already sent a couple of beers your way for your time and knowledge. Just so you know I still have my old dsdt file that worked with Yosemite. In case you want to compare I could also attach it. Thanks
-
Hello everyone... The dsdt Im using is the one from mald0n. After his battery patch I could still boot. The problem is he asked me to disable the _DSM to ZDSM patch and then I wasn’t able to boot, after I resubmitted my send me file. What should I do next ? Is there a Kext creating a conflict ? After I can get the shutdown fixed and the sleep I’ll be all good. Thanks Guys for your time
-
I don’t think I installed any kexts in the system folders. Should I check for anything in particular ? All my kexts are in clover/other Do you want me to boot using usb installer and just to check s/l/e for a kext that shouldn’t be there ? ——- Edit Well the only kext that could be there is voodoohda for my audio. Other than that all my kext on clover folder
-
Thanks for your reply. Ok, disabled that patch, but now computer will not boot. Even tried removing the nvdia=1 boot flag. Computer freezes in this screen:
-
I have attached the new Send me file as requested. Thanks Send me_1 Elis-MBP.zip
-
Hi there MaLd0n first thanks for your time and work helping us guys.. A couple of beers already on their way .. so, after adding your DSDT file now i have battery percentage !! my only issues are: -USB 3.0 still not recognized (laptop only has 1 usb 3.0 port) all other usb ports are working but they are 2.0. even the card reader works under the usb 2.0 hub) I do have the 10.13.6 USB patch by PM. when i go to system report it doesn't show a usb 3.0 hub. - when i choose sleep from menu the screen goes blank but computer never goes to sleep and i have to press power and restart to get it back on. -shutdown doesn't work as the screen goes blank but it never shuts down. i have to hold power button until it shuts down. one last thing im using bootflag nv_disable=1 to disable the nvdia discrete but sometime the screen still blank when it boots up. should i try to patch your dsdt to disable the nvidia gpu and not use the boot flag ? any ideas ? Thanks man.
-
Hello There, One of the admins for this site recommended i get a DSDT patch for the issues still on my laptop. -USB 3.0 not working. ( well i got it to work using CalDigitUSB but system report doesn't show USB 3.0 hub even though the computer sees the 3.0 flash drive attached) -Battery icon is active but it indicates 0 charge. (I Already have Rehabman battery kext on my efi/clover folder) -Sleep Doesn't work -Shutdown doesn't fully work as the screen turns black and fan comes on full speed but the computer will not fully shut off. (Same as sleep) -internal Card Reader not working Everything was working under Yosemite.. Im hoping i can get everything again on High Sierra. Thank you in advance. Send me Elis-MBP.zip
-
well then, just when i thought i was all set.. here is where i am: I replaced the atheros card with the AW-CE123H combo card and now have wifi/bluetooth working. then i updated to high sierra 10.13.6 and now all i get is black screen after boot up. Have read much about it, and all i can find is that i need the intelfixup kext. however that kext its already part of whatevergreen and lilu, both of those kexts are already on my efi folder since i'm using the folder downloaded for sandy bridge notebooks in this forum. Any ideas whats causing the black screen after upgrading from 10.13.2 to 10.13.6 ? HD3000 intel graphics / GT540M Discrete graphics sandy bridge ASUS N53SV i7 Thanks
-
Nevermind... Not wasting anymore time on this. I already order a new WiFi/Bluetooth mini pci-e card AW-CE123H Thanks
-
Ok, found this under patches.. but i dont know where does it goes .. is it a config.plist patch ? --------- one last thing.. is there a miniPCIe card that will give me wifi+Bluetooth natively ? Dell 1510 keeps coming up but some say no bluetooth is included. thanks # Maintained by: toleda for: github.com/toleda/wifi_ar9380-ar928x # File: arpt1-ar928x-ar9380_v2.txt # Credit: MasterChef, PikeRAlpha, THeKiNG # # Atheros AR9380/AR9280/AR9285/AR9287 WiFi dsdt edits # Verify IOReg/pci168c device @1C,6/RP07 otherwise, edit patch file: # Find: RP07 # Replace All: name (name = IOReg/pci168c device name, RP01, BR01, PEX1, etc.) # # If no PXSX, manually add Device (ARPT) after Name (_ADR, 0x001C000x) to dsdt and # edit patch file: # Find: PXSX # Replace All: ARPT # dsdt edit looks like: # Device (name) # { # Name (_ADR, 0x001C000x) # Device (ARPT) # # 1. Insert device ARPT dsdt injection into device Label PXSX parent_label RP07 replace_content begin Name (_ADR, Zero)\n Name (_SUN, One)\n Name (_PRW, Package (0x02) {0x09,0x04})\n Method (_DSM, 4, NotSerialized)\n {\n If (LEqual (Arg2, Zero)) { Return (Buffer() { 0x03 } ) }\n Return (Package()\n {\n "AAPL,slot-name","AirPort",\n "built-in", Buffer () {0x00},\n "device-type","AirPort",\n "model","Atheros AR9x8x 802.11 a/b/g/n Wireless Network Controller",\n "name", "AirPort Extreme",\n "compatible","pci168c,30"\n })\n }\n end; into definitionblock code_regex . insert begin Store ("arpt1-ar928x-ar9380_v2 dsdt edits, github.com/toleda", Debug) end
-
hello, everyone.. This hackingtosh install has been the toughest for me.. don't know why but process has been painstaking so thank you again for all the support. I have gotten bluetooth working, but i cannot get my atheros 9285 to work. after dropping toledaARPT.ket on my EFI/CLOVER/KEXT/OTHER WIFI network comes up but all i got is "scanning networks" but nothing shows up. I know the card works, because i had it working under YOSEMITE. after doing a google search i found that the info.list file in contents info.l=plist pci168c,2b should be the right string and thats already the case. tried a different guide and used kext installer to install airportatheros40 and that resulted in no wifi hardware detected. running out of searches here .. any thoughts ? thanks
-
Thank you. I’ll get on it and then request dsdt
-
Hello everyone, I was able to finally complete my install. e, i was able to install my system using the image downloaded from this site. Had to do some changes to the config.plist to enable the 1080p. (enable dual link and chose mac 8,2 from SMBIOS) my system: ASUS N53SV Sandy Bridge i7 2670QM 8GB Ram HD3000 / GEForce GT540M discrete graphics 512GB SSD I Had Yosemite installed prior to now upgrading to High Sierra and everything was working. I Now have the following NOT working. -WIFI / Bluetooth -the USB 3.0 Port -Sleep ( i invoked sleep from the menu and the screen went blank but it did not went to sleep and i had to restart) -if i choose SHUTDOWN from the menu the screen goes blank and the fan goes on really loud but it never shuts off however if i choose restart, it properly shuts down and restarts. I also don't think the CPU is properly tuned. As of now, i don't have a DSDT file on my clover folder. My question: I thought that by submitting to get a patched dsdt will resolve issues. Should I try to work out issues before I could get a patch dsdt ? Thanks more than happy to send my donation. thanks in advance.
-
—- hi, Question: I’ve submitted the file from the “run me” app. Should I get a patch dsdt first, or resolve issues and then get dsdt ?
-
Hi there, i was able to install my system using the image downloaded from this site. Had to do some changes to the config.plist to enable the 1080p. (enable dual link and chose mac 8,2 from SMBIOS) my system: ASUS N53SV Sandy Bridge i7 2670QM 8GB Ram HD3000 / GEForce GT540M discrete graphics 512GB SSD I Had Yosemite installed prior to now upgrading to High Sierra and everything was working. I Now have the following NOT working. -WIFI / Bluetooth -the USB 3.0 Port -Sleep ( i invoked sleep from the menu and the screen went blank but it did not went to sleep and i had to restart) -if i choose SHUTDOWN from the menu the screen goes blank and the fan goes on really loud but it never shuts off however if i choose restart, it properly shuts down and restarts. I also don't think the CPU is properly tuned. As of now, i don't have a DSDT file on my clover folder. Here is my attached file from the "Run me" app more than happy to send my donation. thanks in advance. Send me Elis-MacBook-Pro.zip
-
ok i guess you are saying that the way to correct the resolution issue is through dsdt and not the config.plist ok, i attached an external monitor and was able to complete the install. problem is that once install is completed, when it goes to the setup screen (setup you account, etc) the image goes black. if the screen is all black i can't run the "run me" app to request a dsdt to be patch. is it ok to load my old dsdt just so that i can use the run me app and submit for a new dsdt, or will that interfere with the "run me" app ? BTW: i understand that donations are appreciated for requesting dsdt patch, and i'm prepared so send my donation. Thanks for all the help
-
Ok, after lots of trial and error i figure out where the issue is coming from. By using my old patched DSDT i was getting a full 1080p image however for some reason it was conflicting with other stuff. i removed the patched DSDT and now the keyboard and trackpad from the laptop are working. my question is, how do i get the full 1080p image without using my previous DSDT.aml ? is that something i need to enable on the config.plist or should i just request for a new dsdt to be patched ? Thanks
-
Hello again, as instructed here i went ahead and downloaded the image (5.5GB) but when trying to boot from it it didn't work then i downloaded the clover folder sandy bridge (mobile) and copied that to my own install usb. SUCCESS !! i was able to boot. however when it got to the install screen all i got was a bunch of distorted colors. so i used my old patched dsdt for 1080p and that worked. i have now successfully installed high sierra. These are the issues im having now. - boot up from the install usb is not always successful. some times i get the same error message i was getting from the installation image. ----------- ERROR !!! Load prelinked kernel with status 0x80000000000009 Error loading kernel cache (0x9) ------------ - internal keypad and trackpad doesn't work. i have to use usb mouse and keyboard - even though i have the sound icon enabled and i can adjust the volume, no sound can be heard through speakers -USB3 port not working. I am attaching pictures. I have not installed clover yet to my internal harddrive SSD as i'm waiting for your guidance on how to resolve these issues. can you guys point me in the right direction .. should i try and find kexts to fix these or are these clover options i need to enable ? I would like to get things working as best as possible before i submit my dsdt for proper patching / best tuning. Thanks again for the help.
-
ok, thanks for your response.. i'm going with high sierra as instructed. I created a usb install using unishit and just the standard settings.. inject intel However i gt an error message. As a side note when my regular clover for yosemite comes up it looks high definition.. but when the clover i just created for install usb comes up the image is big.. dont know if related. here is a photo of my error. ' alt=''> thanks
-
Hello everyone, I am new to this board but im in need of some help. These is my laptop: ASUS N53SV i7 2670QM 512GB SSD Intel HD3000/Nvidia GT540M (computer originally with 720p panel but replaced it with 1080p) Now, I have been running OSX Yosemite (10.10.5) for years on this laptop with no problem. my issue is that i tried to upgrade to High sierra and all I got was an error on the screen. so i gave up. Now i'm trying to upgrade to mojave but i have read that HD3000 support has been dropped. I have downloaded both High Sierra and Mojave any suggestions as to how should i proceed to try to upgrade ? Can i go up to Mojave and if so, is there a guide you can point me to that i can use to build an installer USB for my machine ? Thanks in advance for your help
