Modigliani

Hi MaLd0n, I tried this too, and I even added this link to my description. It seems to me that the problem is in the hardware. When updating the BIOS, for example, the computer turns off and on by itself. In my case, when it turns off after starting the BIOS update process, it can't turn on to continue the next steps of the update. I need to unplug it from the power outlet, turn it on, and then it continues updating the BIOS, but every time it turns off during the BIOS update, I have to do this again. But the strange thing is that within a few days it can go back to sleep normally. Do you have any idea how I could find out where the problem is? It all started after I did a BIOS update, but even reverting the BIOS to that old version, the system didn't come back.

Yes I do, the problem keeps happening as I said.

I've tried a number of things to try to resolve this, but I still haven't been able to isolate the problem. I have this motherboard: B560M AORUS ELITE. A few months ago, my computer started having issues waking from sleep mode. I updated the BIOS this week to try to resolve the issue again, switching to F12 (latest version). For four days, the computer couldn’t fully shut down – it kept the monitor light on, and pressing the power button didn’t turn it back on. To shut it down, I had to unplug it, wait 5 seconds, plug it back in, and then it would turn on. After four days with the updated BIOS, it started shutting down normally. I knew it was shutting down correctly because the monitor light would blink, and when it shut down “incorrectly,” the light would stay on. Once it started shutting down normally, I tried putting it to sleep, and it worked perfectly. For days, it went in and out of sleep mode without issues. Then, I needed to move the computer to the living room, so I shut it down, plugged it in in the living room, and it turned on normally. After leaving it idle for a while, it went to sleep but didn’t wake up, and I had to unplug it again. Then I brought it back to the office, put it to sleep, and it wouldn’t wake up. I booted into Windows, and it still couldn’t wake from sleep mode. No BIOS settings were changed during this transition. What I've tested so far: Replacing the power supply Swapping the RAM Disabling XMP Replacing the GPU Shorting pins 5 and 6 on the GPU Booting without the GPU Testing sleep mode wake-up in Windows Enabling and disabling the ERP option in the BIOS Restoring the BIOS to default settings Booting direct from windows boot loader I would love to have sleep mode working again, but since the issue also happens in Windows, I believe it may be related to the BIOS settings or a hardware issue. Is there anything I can try configuring in the BIOS to see if it can wake from sleep mode and keep working?

Será que você confundiu o airdrop com o airplay? O airdrop é um serviço que você consegue enviar um arquivo do iPhone para o Mac. No meu caso eu não tenho a placa wifi somente bluetooth + ethernet. O airdrop esta ativo para todas as interfaces, mas eu tenho um erro. Se você também não tem interface wireless instalada, me fale se você consegue ver o airdrop neste menu:

I solved this problem with an Orico bta-403, mouse and phone work, but I don't have airdrop. I made a new post here with more details than I've tried:

Nova tentativa: Adicionei essas chaves para o meu dispositivo no meu BroadcomBluetoothHostControllerUSBTransport.kext e coloquei a kext completa IOBluetoothFamily.kext no /L/E <key>idProduct</key> <integer>1</integer> <key>idVendor</key> <integer>2578</integer> Eu não consegui apagar a IOBluetoothFamily.kext do /S/L/E, por que não tenho permissão. Fiz o reboot e continuo tendo o mesmo erro com o airdrop. Eu tentei então carregar a kext BroadcomBluetoothHostControllerUSBTransport.kext diretamente pelo terminal, ela carrega, reiniciei o finder e continua o mesmo erro. Alguma ideia?

Instalei o Orico BTA-403 para usar com Bluetooth. Eu tenho mouse e fone de ouvido funcionando bem, mas o meu airdrop não funciona, eu tenho este erro: The operation can’t be completed because the item can’t be found. O AiDrop também não aparece na minha janela Go do Finder. Eu tentei exatamente isto nesta ordem: Reset Nvram Open Core defaults write com.apple.NetworkBrowser DisableAirDrop -bool YES defaults write com.apple.NetworkBrowser DisableAirDrop -bool NO defaults write com.apple.NetworkBrowser BrowseAllInterfaces 1 → Reset Alguma sugestão para ter o AirDrop funcionando? Eu acho que vou precisar alterar esta kext, você sabe se eu posso colocar exatamente assim VendorID 0x0a12 ou preciso converter para algum outro formato?

I was asking myself... "How can I keep my kexts up to date?" Then I found this tool that seems to work very well, it does not install automatically, put it on the desktop for you to choose. KEXT UPDATER https://bitbucket.org/profdrluigi/kextupdater/downloads/ How do you prefer to do this?

Experimente com FakePCIID_Broadcom_wifi.kext

I have a bluetooth 2.0 Product ID: 0x0001 Vendor ID: 0x0a12 (Cambridge Silicon Radio Ltd.) Version: 19.58 Speed: Up to 12 Mb / s Location ID: 0x14110000 / 31 Current Available (mA): 500 Current Required (mA): 0 Extra Operating Current (mA): 0 It was enough to connect it to BigSur and it was recognized, I can connect the mouse to it, but if I connect the headset, it cuts off the audio. It also appears in my Bluetooth section of the Mac OS, yet I still get the error "The operation can’t be completed because the item can’t be found." having to open Aidrop. I imagine it’s because of Bluetooth 2.0,, any suggestions for how I can investigate?

I have a bluetooth dongle and connection via ethernet but I don't have wifi. Is it possible to make the airdrop work like this? I've tried this: defaults write com.apple.NetworkBrowser BrowseAllInterfaces 1 killall Finder I have the error "The operation can’t be completed because the item can’t be found." when trying to open the airdrop. Any suggestion?

Parece que é uma boa opção, neste link você pode ver as placas gráficas suportadas pelo FinalCut https://support.apple.com/en-us/HT202239 Use esses modelos para nortear suas pesquisas.

Oops! Agora o que ficou muito estranho é quando o computador dorme, quando ele volta o Bluetooth fica falhando, tanto o som quanto a conexão com o mouse. Alguma sugestão? A versão antiga eu não conseguia conectar o fone de ouvido, mas isto nunca acontecia com o mouse.

Isto resolveu o meu problema, eu apenas instalei as duas kexts e reiniciei. Eu já estava usando essas kexts, mas era uma versão antiga. Obrigado Maldon!

Oi Maldon, é um Bluetooth intel, eu uso o magic mouse nele normalmente, essas são as specs: Hardware, Features, and Settings: Name: lenovo Address: E4-B3-18-E8-D5-6D Bluetooth Low Energy Supported: Yes Handoff Supported: No Instant Hot Spot Supported: No Manufacturer: Intel Transport: USB Firmware Version: 7.256 (7.256) Bluetooth Power: On Discoverable: Off Connectable: Yes Auto Seek Pointing: On Remote wake: On Vendor ID: 0x8087 Product ID: 0x0A2B HCI Version: 4.1 (0x7) HCI Revision: 0x100 LMP Version: 4.1 (0x7) LMP Subversion: 0x100 Device Type (Major): Computer Device Type (Complete): Mac Portable Composite Class Of Device: 0x38010C Device Class (Major): 0x01 Device Class (Minor): 0x03 Service Class: 0x1C0 Auto Seek Keyboard: On

Olá pessoal, tenho meu mouse bluetooth conectado ao computador e funciona normalmente, eu consigo encontrar o meu fone bluetooth pelo painel do mac, ele se conecta ao computador mas não aparece na lista de saídas disponíveis. Como eu posso resolver isto?

It looked like this was never going to happen but it did! What's working? Wifi 2.4 GHz: YES Wifi 5 GHz: YES Connect to hidden network: YES *Bluetooth: YES * If you use bluetooth with the internet, the connection will slow down. OpenIntelWireless FIRST STEP Check if your card is on the supported list: https://openintelwireless.github.io/itlwm/Compat.html#gen-1 SECOND STEP Download the STABLE version https://github.com/OpenIntelWireless/itlwm/releases THIRD STEP Install itwm.kext in the bootloader FOURTH STEP Install Client HeliPort, you need it to select networks. https://openintelwireless.github.io/HeliPort/ FIFTH STEP For the Bluetooth: https://github.com/OpenIntelWireless/IntelBluetoothFirmware Reboot You will notice that an ethernet network has been created in your system preferences, it is your wifi card. Now just enjoy it. Greet: zxystd, @MaLd0n, @oldnapalm,

Realmente os links estão quebrados eu não tenho para i5 .

Você consegue trocar o seu display na Santa Efigênia no shopping do notebook.

oi old, estou tendo um problema na minha AR928X para conexões de entrada. Depois de um tempo ela para de escutar na porta 80 e preciso fazer off -> on para voltar a funcionar. Não é só com http, outros serviços também . Estou com ML 10.8.2, ela funciona através de Atheros40.kext .

No manual que escrevi tem um link no tópico o que você precisa saber, lá você encontra DSDT. É importante vc seguir a configuração certa por que a máquina pode funcionar com metade ou menos do que é realmente capaz.

Eu não conheço o unishit. O ideal é você conseguir fazer o pendrive inicializável e seguir o tutorial depois. Como criar um pendrive inicilizável do Mountain Lion http://www.Olarila.com/forum/viewtopic.php?f=26&t=1618

Oi, não funciona na intel hd 4000 o patch. É melhor vc tentar fazer o que artur indicou .

Valeu! Estou para fazer um update que vai deixar melhor .

Nova Solução Antes de você substituir o seu display, experimente fazer isto se estiver tendo os congelamentos (freeze) e sujeiras na tela (artefatos, artifacts) http://www.insanelymac.com/forum/topic/271573-guide-dell-inspiron-n5110/page__st__1000#entry1867062