bogdi1988

Damn. Ok. Let me try that. Added in 5 minutes 46 seconds: Ok. CSM enabled. Same issue. If I leave both HDMI in, at reboot I get only 1 monitor to power on. OS still thinks both are connected. I have to unplug/replug monitor to get OS to re-fresh monitor configuration and output on both.

Disabled.

Changed to 18,1 and i get no artifacts. Updated WEG. Dual monitor on HDMI seems to work with the following issues: - if both are connected during a reboot, midway in the OSX loading screen (the line that slowly fills up) screens go blank. Only way to make it work is reboot with 1 connected and then after login, connect second - intermittent flashing on secondary screen - goes blank and comes back up, or a slight flicker - DisplayPort is still not working. Attached is my Clover config. What do I have misconfigured? config.plist.zip

Note, seems like any multi monitor setup does not work.

thanks for your help on that. was not aware that some ports are tricky

Hi, Just got Mojave set up on my Gigabyte Z3700N WiFi with an i5-8400 CPU and Intel GFX and the Olarila image. Had to use model number of 17,1 as 18,2 was causing video artifacts. I noticed that the DisplayPort does not work at all. Any setting I am missing in Clover?

so you are saying i need to put the USB drive in a different port during install?

Here's a screenshot and a video of the error: https://drive.google.com/drive/folders/1-dCrGowT8WE-owpGaYAP0M0RswRlNQAU

Just tried installing Mojave on my Gigabyte Z370N WiFi with an i5 8400 CPU. Tried a bunch of times and even multiple USB re-image and the 14.1 image would not boot and give a kernel panic during the verbose boot. I went to the GM (14.0) build and that worked like a charm! Anyone else run into issues?