luckbacknow

Unfortunately it is not supported, only 620 and up. Despite not bringing any differences between them, I think the problem is restricted to the device ID.

MaLd0n, the pach informed in it suits? <key> PciRoot (0x0) / Pci (0x2,0x0) </key> <dict> <key> AAPL, GfxYTile </key> <data> AQAAAA == </data> <key> AAPL, ig-platform- id </key> <dados> CQClPg == </data> <key> id do dispositivo </key> <data> pT4AAA == </data> <key> framebuffer-fbmem </key> <data> AACQAA = = </data> <key> framebuffer-patch-enable </key> <data> AQAAAA == </data> <key> framebuffer-stolenmem </key> <data> AAAwAQ == </data> <key> hda-gfx </key> <string> onboard-1 </string> </dict>

After successful installation of Catalina, I can't get a graphics acceleration with the UHD 610 from intel. Appears in the Hardware information but only displays 5 Mb of VRam Set-up Motherboard Asus H310 gaming plus br Processador intel G5400 Fonte corsair 500w 12 Gb ram ddr4 3200 balistix Nvme 256 Gb kingspec Hd Samsung 1Tb

MaLd0n I installed the voodooHDA kext and was successful with Audio, thanks Thanks!

Hello MaLd0n, passing a feedback here, I added the NullCPUPowerManagement.kext drive in the other folder and I was not successful, so I took a position, I took the config.plist and DSDT.aml from the clover folder you sent me and put it in my old clover folder, I also kept the SSDT-EC.aml file in the folder pached. Another point, I added in the config.plist that you sent me the command line below <dict> <key> Comment </key> <string> Fix 300-series RTC Bug </string> <key> Disabled </key> <false /> <key> Find </key> <data> oAqTU1RBUwE = </data> <key> Replace </key> <data> oAqRCv8L // 8 = </data> </dict> Installation successful! I thank you for your attention Now I find only problems with audio that doesn't work, could you help me with that?

MaLd0n Replace the clover folder in EFI, and now does not boot the installation

Also follows the decompiled file in IASL DSDT decompilado.zip

I did extracting by F4 Clover and generated these files that I sent you. I found it strange that when opening them with text file they are all encoded.

MaLd0n forgiveness, I forgot to send, follow the file. DSDT.zip

Hi MaLd0n Samuel e Mayconliborio, from the hakintosh Brazil domain, gave me a lot of support here and gave me a direction in which I was able to advance in the installation with the files SSDT-EC.aml e config.plist files. They reported to a discussion in https://www.tonycrapx86.com/threads/solved-stuck-at-debug.292201/post-2092037. Therefore, I was able to start the installation that always stopped with 2 minutes left for completion. I discovered that I needed to manually restart to proceed with the process, I also discovered that the partition table needs to be APFS and not journaling. From there I came to the following screens. I chose this option I get to here and freezes, then restart again and I have the screens below. I have a doubt which one to start with and the most I got was until now My project consists of a trial boot Windows, Ubuntu and Macos. Windows is installed in an NVME that I removed to avoid errors, and will be inserted after finishing the installation of the Mac, while Macos and Ubuntu, share the same HDD with partitions in Ext4 for Ubuntu 250Gb and APFS 250Gb considering that using Journalig did not advance for me. Help me please! config.plist.zip

I did it for diskimage without success, same mistake.

MaLd0n, I recorded the image with Etcher, does this have any positive impact? or better to do with the transmac?

Ok MaLd0n, how should I proceed? guide me please!

Hello! Stuck in the installation of Catalina in a Hakingtosh. set-up Asus Tuf gaming plus H310 Processor:Intel G5400 Memory: ddr4 12Gb Balistix Ssd Nvme m.2: Kingspec 256 Gb Hdd Sony 1Tb FonteÇ Corsair:500w Trying to boot the installation with the following settings: fakecpu Id:0x0306a0 Igpu 0x59168086 0x59120000 Startup instructions: The same ones loaded in the plist in the Catalina 10.15.4 image obtained in Olaria. Please help me! Also follow the error images envio.rar

Hello MaLd0n, sorry to be bothering you with this subject yet, but I'm confused with this problem, getting me sleepy. about radeon 7950, I managed to advance in some aspects, after a lot of grating, editing of dsdt, modifications to the plist of kexts amd7000controler, amdradeonx4000 with insertions of ID of my card and extraction of vbios (with dcpimanager) and patch via clover, I have now full HD resolution. my frustration is not to get VRAM above 5m, even inserting into the clover. Can you tell me which kext does this control? and some modification to change that condition? Adicionado a 8 minutos 5 segundos: follows some files for appreciation Adicionado a 1 minuto 57 segundos: another Adicionado a 2 minutos 29 segundos: another dsdt and kext.zip IONDRVSupport 1.kext.zip config.plist.zip