mbrogan30

Glad it helped.

I have searched everywhere for help with the Asrock h310m hdv motherboard. I have finally installed Mojave after many trials and error. I first want to say thanks to Maldon. He is the one that got me this far. I tried for many days just to get the usb installer to boot. I found out finally after making many changes in the bios and making new usb drives that it actually is the bios itself. I had the latest version 3.30 installed on the motherboard and could get it to load. I downgraded the bios to 3.00 and it finally booted the installer. The settings in the bios are the same as most other motherboards. The other problem I was having was when I finally got the boot loader to start the screen would timeout. I got around this by having HDMI and DMI cables attached to the monitor. Apparently it is switching out at boot. I haven't been Hackintoshing for a long time and I am no expert so please forgive me if I say something incorrect. The system is running very well now but, still not perfect. I had an issue with sound and used HDA to get it going. The board is suppose to be an 882 kext but I couldn't get sound to work with it. After you install the HDA then you'll have to turn the gain down to remove the static sound and can control it with regular volume controls. Thank you Maldon for your help. If this helps you please donate to This website to keep it going. Added in 16 minutes 11 seconds: Here is the clover file that works for the board if you need it. CLOVER.zip

Could you take a look at this? I have tried and still only have 7mb memory. Thanks Send me macs-iMac.at.net.zip

Good news I have managed to install Mojave. The only way I can boot is with the HDMI cable and DVI cable both hook up. Some how its transfering from HDMI to DVI during boot. When it does boot it is very glitchy. Any advice please?

Making progress. I downgraded the bios. It apparently won't work with the 3.30 bios. I downgraded to the 3.0. It now loads until its time for the apple logo and then it goes to a black screen. Any advice? Added in 2 minutes 2 seconds: It goes black right after it says DMOS has arrived

I created a new usb and used your clover folder. It gives me the same results. No NVRAM. Any more ideas. I noticed on insanely mac someone had a motherboard like mine. You assisted them with their files. I'm not sure what I'm doing wrong. I am currently on Mojave on my other machine without any issues. Thanks for your help.

Clover didn't work. I edited plist and tried. Here are the options preselected. What should have a check mark on it? Added in 1 minute 47 seconds: results are here. Thanks

I reset the bios and tried it without making any changes and it still will not boot the usb. I changed the bios settings back to settings advised and tried it again. It has error no nvram variable. Added in 2 minutes 34 seconds: I have seen a few people claiming to install hackintosh on this motherboard but, I can't find any proof of it. Maybe I should just purchase another motherboard? I have had hackintosh for a long time and never had this problem. I am thankful for people like you to help out. Thanks for what you do. Added in 3 minutes 40 seconds: Donated you a beer! Cheers

I removed the other clover folder and replaced it with the zip. This is what I am getting now. Do you think it's a bios setting error? I have changed every setting available on my motherboard.

This is where I am at with Mojave. I appreciate your help.

I will give it a shot. Thanks

I have the fakesmc installed and now I am having ACPI ERROR METHOD PARSE EXECUTION FAILURE. Can you please assist with this?

I tried and get the same results.

I appreciate your work. I bought the h310 hdv with i8400 cpu. I keep getting stuck loading the usb. It always stops with can't identify nvram. Could you please assist with this?: