Epsylon
-
Posts
19 -
Joined
-
Last visited
-
- The mouse stuttering stopped after the first reboot. I'll try out those kexts for the wifi. - Hotplug and USB-C works on the thunderbolt (with SSDT-Z370-TB3HP.aml Do I need SSDT-DTPG.aml too??) - The 8700K goes up to 3.7GHz max now, before was going up to 4.3GHz. - Geekbench works again but the score has gone down a lot. I used to get over 6000 on a single core, now it scores just over 5000. Same with Cinebench, performance has gone really down:( - Sleep doesn't work.
-
But my wifi/bluetooth is a genuine apple card, I didn't think it needed patches? It was fully working with all the other DSDTs I got from you, I never had a problem with it. Do I still need those patches?
-
This is without ssdt for thunderbolt, just your efi with your DSDT. The bluetooth mouse was stuttering this time. Also before I coud see the alpine ridge in the PCI section of the system information when I was using your previous DSDTs without SSDT, now it doesn't show up. I haven't test anything else yet. Send me Studio.vanila.2.zip
-
Unfortunately I can't use mojave as I'm using audio software that isn't compatible with 10.14 yet:( But there are 'aorus z370 ultra gaming' hacks with same config like mine that are fully working. The thunderbolt worked on this board, including hotplug, with one of your DSTDs we've tried out. The problem I've had the last few days was a corrupt BIOS. It kept resetting the CMOS and changing the settings all the time and made it difficult to send you the right files and get the DSDT fixed. The 'Above 4G decoding' in the BIOS kept getting disabled and that was the problem with the last screenshot I sent you. I've had to downgrade the BIOS and re-flash it back to the latest F14. The intelHD is now enabled and working and I didn't have any problems booting and extracting the files this time:) This is the 'sendme' with the default Olarila folder and clover 4920: Send me Studio.vanila.zip A stable working USB and Thunderbolt is important for my work so I really need your help bro. I'll donate some more once we finish it all off:) Thank you for your time mate!
-
Ok, here it is latest files Send me Studio.fritz.box.zip Am I gonna be able to re-enable UHD 630 later for headless encoding in FCPX ? Everytime I clear caches and NVRAM I have to reset the CMOS and re-configure the BIOS otherwise I get a 'prohibited' sign as soon as I try to boot after the Clover gui. Thanks again:)
-
Done it and this is what I got
-
All done now, this is from clean install with latest Clover and default Olarila folder. Send me Studio.fritz.box-default clover installation.zip Thank you very much mate:)
-
Ok, it all got a bit confusing to me so I decided to clean everything up. I have installed the latest clover and downloaded the default Olarila 'CLOVER.SERIES.100.200.300.zip' from here to try and extract the 'sendme' files so we can build a fresh DSDT. But I get this Can you advise me please? Thank you:)
-
Hey mate, sorry, somehow I had booted from an old usb flash drive by accident and sent you wrong info and files the second time around. I have now updated to latest clover and used the 'Arquivo Comprimido.zip' you gave me. With Thunderbolt only the first port works including USB-C (I haven't managed to get the second port to work with anything). Hot plug works on the Thunderbolt! Sleep works for up to a few hours ( if left in sleep overnight it wakes to black screen and kernel panic, something to do with usb?). My WD MyPassport USB3 external hard drive it shows as internal. Another external SSD and a flash drive show as internal and ejectable in disk utility. When I put it to sleep it doesn't eject the external flash drives and hard disks, giving me errors when it wakes up. Geekbench 4 is crashing when trying to run any test (was working before). Could you please have a quick look at my config.plist and also check that my drivers & kexts in Clover are ok? CLOVER.zip Here's the new Sendme files Send me Studio.fritz.box.zip Thank you for the help bro, much appreciated:)
-
Ok, I don't mind much the hotplug but I do need the 2nd port, USB-C and sleep to work if possible. That's with the latest DSDT Send me Studio.fritz.box.zip
-
ok
-
I can't boot without DSDT for some reason... I suspect the NVME or the Alpine Ridge causing some problem. Also maybe the gonfig.plist I'm using needs the DSDT? Anyway, I added back SSDT-Z370-TB3HP.aml, SSDT-Z370-TB3HP.aml and SSDT-Z370-RX580.aml I had from another forum I found in a thread about thunderbolt and the PCI info shows correct now apart from the BCM43602 card missing. The version of Clover I'm using to boot is 4862 I haven't checked yet if sleep is working. Also I need to check if the second thunderbolt port on the Alpine Ridge is working with hotplug and the USB-C (the second port, USB-C and hotpug never worked with the bios F10 I was using before forcing me to update to F14) Here's the 'send me' zip I've extracted using your previous DSDT you had given me and the SSDTs I've added myself. Could you please have a look for any ACPI errors? Send me Studio.fritz.box.zip
-
I haven't tried that as I've read somewhere that F11 and F12 don't work with MacOs. I'm on bios F14 for now and it works with latest Clover, your patched DSDT and the Clover folder I was using when I had bios F1O, with the Alpine Ridge and the Broadcom wifi installed. But If I take that clover folder and DSDT out and use the default 'CLOVER Folder for all Chipsets' I've got from here without any DSDT so I can boot and run RunMe.app to build a new DSDT and reflect my hardware changes, then I cannot boot. I've posted a picture a couple of posts ago to show you where it gets stuck. Shall I put back the Clover folder with your DSDT I was using with the previous Bios, run the RunMe.app and send you the files? Thanks:)
-
I have added an Alpine Ridge v2.0 and need bios F11 minimum according to Gigabyte. I'm also planning to upgrade to 9900K soon so I need latest bios version for cpu support. I have no problem booting with the clover folder and DSDT you have made for me when I was on Bios F10. I can use it and boot but pci info on 'about my mac' doesn't show any devices. I have aslo changed my wifi card to a Broadcom and moved a few things around so I definitely need a new DSDT. But the default Olarila folder for 300 chipset I've downloaded from here doesn't let me boot. What shall I do?
-
I followed the instructions and there's only BIOS.aml. I'm using the default Olarila folder without the DSDT you've given me previously. Basically I'd like to do a fresh one, but so far I can't boot :/