Obrigado pelo retorno!
boot.log >
0:100 0:100 MemLog inited, TSC freq: 3092973318
0:100 0:000 LegacyRegion2: Chipset/proc: 0x01008086
0:100 0:000 Next Generation Core processors (PAM 0x80-0x86)
0:100 0:000 Test PAM1=(0x41=90, 0x5a=00, 0x81=11, 0x91=00) at chipset 01008086
0:100 0:000 , Install = Success
0:112 0:012 BiosVideoDriverBindingStart!
0:112 0:000 BiosVideoCheckForVbe
0:112 0:000 EdidOverride not found
0:267 0:155 Edid1-
0:422 0:155 Edid0-
0:443 0:021 0 640x480 attr=3BF - ok, 640x480, working, highest, pref=0
0:444 0:000 1 800x600 attr=3BF - ok, 800x600, working, highest, pref=1
0:445 0:000 2 1024x768 attr=3BF - ok, 1024x768, working, highest, pref=2
0:446 0:000 3 1280x1024 attr=3BF - ok
0:451 0:004 4 1600x1200 attr=3BF - ok
0:451 0:000 BV new mode: 2 1024x768
0:817 0:366 SetMode pref 2 (2) = Success
2:382 1:564
2:382 0:000 Now is 17.1.2015, 12:42:56 (GMT+2047)
2:382 0:000 Starting Clover rev 3113 on CLOVER EFI
2:382 0:000 SelfDevicePath=PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x4,0x0,0x0)\HD(1,GPT,B73285DC-8A23-4EE9-AA22-39703283F8A1,0x28,0x64000) @7B4EF298
2:382 0:000 SelfDirPath = \EFI\CLOVER
2:382 0:000 Total Memory Slots Count = 2
2:382 0:000 Type 17 Index = 0
2:382 0:000 Ignoring insane frequency value 0MHz
2:382 0:000 SmbiosTable.Type17->Speed = 0MHz
2:382 0:000 SmbiosTable.Type17->Size = 0MB
2:382 0:000 SmbiosTable.Type17->Bank/Device = BANCO 1 CanalA-DIMM1
2:382 0:000 Type 17 Index = 1
2:382 0:000 SmbiosTable.Type17->Speed = 1333MHz
2:382 0:000 SmbiosTable.Type17->Size = 2048MB
2:382 0:000 SmbiosTable.Type17->Bank/Device = BANCO 3 CanalB-DIMM1
2:382 0:000 Boot status=0
2:382 0:000 Clover revision: 3113 running on H61H2-M2
2:382 0:000 ... with board H61H2-M2
2:382 0:000 Clover load options size = 0 bytes
2:407 0:024 Using OEM config.plist at path: EFI\CLOVER\config.plist
2:407 0:000 EFI\CLOVER\config.plist loaded: Success
2:413 0:005 Found theme directory: christmas
2:420 0:006 Found theme directory: newyear
2:425 0:005 Loading early settings
2:425 0:000 timeout set to 5
2:425 0:000 Custom boot CUSTOM_BOOT_DISABLED (0x0)
2:425 0:000 Default theme: christmas
2:425 0:000 LoadDrivers() start
2:425 0:000 LoadDrivers() end
2:425 0:000 SetScreenResolution: 1280x1024 - setting Mode 3
2:425 0:000 BV new mode: 3 1280x1024
2:975 0:549 Video mode change to mode #3: Success
3:034 0:059 Console modes reported: 4, available modes:
3:034 0:000 Mode 1: 80x25
3:034 0:000 Mode 2: 80x50
3:034 0:000 Mode 3: 100x31
3:034 0:000 Mode 4: 160x53 (current mode)
3:034 0:000 Console modes reported: 4, available modes:
3:034 0:000 Mode 1: 80x25
3:034 0:000 Mode 2: 80x50
3:034 0:000 Mode 3: 100x31
3:034 0:000 Mode 4: 160x53 (current mode)
3:034 0:000 SetScreenResolution: 1280x1024 - already set
3:034 0:000 reinit: self device path=PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x4,0x0,0x0)\HD(1,GPT,B73285DC-8A23-4EE9-AA22-39703283F8A1,0x28,0x64000)
3:034 0:000 CPU Vendor = 756E6547 Model=206A7
3:034 0:000 The CPU not supported turbo
3:034 0:000 BrandString = Intel(R) Core(TM) i3-2100 CPU @ 3.10GHz
3:034 0:000 MSR 0xE2 before patch 1C008401
3:034 0:000 MSR 0xE2 is locked, PM patches will be turned on
3:034 0:000 MSR 0xE4 00000414
3:034 0:000 MSR 0xCE 00001000_60011F00
3:034 0:000 non-usable FLEX_RATIO = 10000
3:034 0:000 corrected FLEX_RATIO = 0
3:034 0:000 MSR 0x1B0 00000000
3:034 0:000 FSBFrequency=100MHz DMIvalue=100000kHz
3:034 0:000 Corrected FSBFrequency=100MHz
3:034 0:000 Vendor/Model/Stepping: 0x756E6547/0x2A/0x7
3:034 0:000 Family/ExtFamily: 0x6/0x0
3:034 0:000 MaxDiv/MinDiv: 31.0/16
3:034 0:000 Turbo: 31/31/31/31
3:034 0:000 Features: 0xBFEBFBFF
3:034 0:000 Threads: 4
3:034 0:000 Cores: 2
3:034 0:000 FSB: 100 MHz
3:034 0:000 CPU: 3100 MHz
3:034 0:000 TSC: 3100 MHz
3:034 0:000 PIS: 400 MHz
3:034 0:000 PCI (00|00:00.00) : 8086 0100 class=060000
3:034 0:000 PCI (00|00:01.00) : 8086 0101 class=060400
3:034 0:000 PCI (00|01:00.00) : 10DE 1040 class=030000
3:034 0:000 Found NVidia model=GeForce GT 520
3:034 0:000 PCI (00|01:00.01) : 10DE 0E08 class=040300
3:034 0:000 PCI (00|00:16.00) : 8086 1C3A class=078000
3:034 0:000 PCI (00|00:1A.00) : 8086 1C2D class=0C0320
3:034 0:000 PCI (00|00:1B.00) : 8086 1C20 class=040300
3:034 0:000 PCI (00|00:1C.00) : 8086 1C10 class=060400
3:034 0:000 PCI (00|00:1C.04) : 8086 1C18 class=060400
3:034 0:000 PCI (00|03:00.00) : 1969 2062 class=020000
3:034 0:000 LAN 0, Vendor=1969, MMIO=F7100000
3:034 0:000 PCI (00|00:1D.00) : 8086 1C26 class=0C0320
3:035 0:000 PCI (00|00:1F.00) : 8086 1C5C class=060100
3:035 0:000 PCI (00|00:1F.02) : 8086 1C02 class=010601
3:035 0:000 PCI (00|00:1F.03) : 8086 1C22 class=0C0500
3:035 0:000 get legacy LAN MAC, 1 card found
3:035 0:000 Legacy MAC address of LAN #0= 10:78:D2:BA:B0:ED:
3:035 0:000 ScanSPD() start
3:035 0:000 SMBus CmdReg: 0x3
3:035 0:000 Scanning SMBus [8086:1C22], mmio: 0xF7205004, ioport: 0xF000, hostc: 0x1
3:068 0:032 SPD[3]: Type 11 @0x53
3:076 0:008 Not using XMP because it is not present
3:076 0:000 DDR speed 1333MHz
3:076 0:000 Slot: 3 Type 24 2048MB 1333MHz Vendor=Smart Modular PartNo=SH564568FH8N0QHSCR SerialNo=000404070F03090F
3:197 0:120 ScanSPD() end
3:206 0:009 Get Acpi Tables List from RSDT:
3:206 0:000 Found table: FACP A M I len=132
3:206 0:000 Found table: APIC A M I len=114
3:206 0:000 Found table: FPDT A M I len=68
3:206 0:000 Found table: MCFG A M I len=60
3:206 0:000 Found table: HPET A M I len=56
3:206 0:000 Found table: SSDT SataTabl len=877
3:206 0:000 Found table: SSDT Cpu0Ist len=2474
3:206 0:000 Found table: SSDT CpuPm len=2850
3:206 0:000 Calibrated TSC frequency =3092973318 =3092MHz
3:206 0:000 Loading main settings
3:206 0:000 USB FixOwnership: true
3:206 0:000 Dropping 3 tables
3:206 0:000 Drop table 0 signature="DMAR" (52414D44)
3:206 0:000 set table: 52414D44, 0 to drop:
3:206 0:000 Drop table 1 signature="SSDT" (54445353) table-id="CpuPm" (0000006D50757043)
3:206 0:000 set table: 54445353, 6D50757043 to drop: true
3:206 0:000
3:206 0:000 Drop table 2 signature="SSDT" (54445353) table-id="Cpu0Ist" (0074734930757043)
3:206 0:000 set table: 54445353, 74734930757043 to drop: true
3:206 0:000
3:206 0:000 Config set Fixes will override FixMask mask!
3:206 0:000 final mask=9FE6F9D7
3:207 0:000 found 8 volumes with blockIO
3:207 0:000 0. Volume:
3:207 0:000 PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)
3:214 0:007 Result of bootcode detection: bootable unknown (legacy)
3:214 0:000 1. Volume:
3:214 0:000 PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x4,0x0,0x0)
3:218 0:004 Result of bootcode detection: bootable unknown (legacy)
3:218 0:000 2. Volume:
3:218 0:000 PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x5,0x0,0x0)
3:219 0:000 Result of bootcode detection: bootable unknown (legacy)
3:219 0:000 3. Volume:
3:219 0:000 PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x1,0x0,0x0)
3:219 0:000 found optical drive
3:219 0:000 4. Volume:
3:219 0:000 PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(1,MBR,0x7F8C0599,0x3F,0x12A18A82)
3:220 0:000 Result of bootcode detection: bootable unknown (legacy)
3:220 0:000 5. Volume:
3:220 0:000 PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x4,0x0,0x0)\HD(1,GPT,B73285DC-8A23-4EE9-AA22-39703283F8A1,0x28,0x64000)
3:221 0:000 Result of bootcode detection: bootable unknown (legacy)
3:221 0:000 This is SelfVolume !!
3:221 0:000 6. Volume:
3:221 0:000 PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x4,0x0,0x0)\HD(2,GPT,611B4AD8-B47C-4D1A-B04B-3C431DF3811F,0x64028,0x9375100)
3:232 0:011 Result of bootcode detection: bootable unknown (legacy)
3:232 0:000 7. Volume:
3:232 0:000 PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x4,0x0,0x0)\HD(3,GPT,E46A31FA-3158-4D23-9C91-B618A3697411,0x93D9128,0x135F20)
3:341 0:108 Loading nvram.plist from Vol 'Machintosh' - loaded, size=365
3:365 0:023 PutNvramPlistToRtVars ...
3:365 0:000 Adding Key: LocationServicesEnabled: Size = 1, Data: 01
3:365 0:000 Adding Key: fmm-computer-name: Size = 15, Data: 69 4D 61 63 20 64 65 20 45 64 65 72 73 6F 6E
3:365 0:000 Adding Key: security-mode: String: Size = 4, Val = 'none'
3:365 0:000 Using theme 'christmas' (EFI\CLOVER\themes\christmas)
3:365 0:000 OS main and drive as badge
3:369 0:003 font WoR_NovaMono_9W_A.png loaded from themedir
3:369 0:000 Choosing theme christmas
3:369 0:000 Custom entries start
3:369 0:000 Custom entries finish
3:369 0:000 Scanning loaders...
3:369 0:000 0: 'Whole Disc Boot' no file system
3:369 0:000 1: 'Whole Disc Boot' no file system
3:369 0:000 2: 'Whole Disc Boot' no file system
3:369 0:000 3: 'Whole Disc Boot' no file system
3:369 0:000 4: 'Legacy HD1' no file system
3:369 0:000 5: 'EFI'
3:407 0:037 6: 'Machintosh'
3:436 0:028 AddLoaderEntry for Volume Name=Machintosh
3:454 0:018 Check if volume Is Hibernated:
3:454 0:000 Check sleep image 'by signature':
3:513 0:059 read prefs \Library\Preferences\SystemConfiguration\com.apple.PowerManagement.plist status=Success
3:513 0:000 SleepImage name from pref: ImageVolume = 'Machintosh', ImageName = '\private\var\vm\sleepimage'
3:541 0:028 sleepimage not found -> Not Found
3:541 0:000 hibernated: no - sign
3:751 0:209 7: 'Recovery HD'
3:782 0:031 AddLoaderEntry for Volume Name=Recovery HD
3:810 0:027 Custom legacy start
3:810 0:000 Custom legacy end
3:810 0:000 Scanning legacy ...
3:810 0:000 0: 'Whole Disc Boot' (legacy) not legacy
3:810 0:000 1: 'Whole Disc Boot' (legacy) not legacy
3:810 0:000 2: 'Whole Disc Boot' (legacy) not legacy
3:810 0:000 3: 'Whole Disc Boot' (legacy) not legacy
3:810 0:000 4: 'Legacy HD1' (legacy) not legacy
3:810 0:000 5: 'EFI' (legacy) not legacy
3:810 0:000 6: 'Machintosh' (legacy) not legacy
3:810 0:000 7: 'Recovery HD' (legacy) not legacy
3:810 0:000 Custom tool start
3:810 0:000 Custom tool end
3:842 0:032 found tool \EFI\CLOVER\tools\Shell64U.efi
3:842 0:000 Checking EFI partition Volume 5 for Clover
3:842 0:000 Found Clover
3:844 0:001 GetEfiBootDeviceFromNvram: efi-boot-device-data not found
3:844 0:000 EfiBootVolume not found
3:844 0:000 Default boot entry not found
3:844 0:000 DefaultIndex=-1 and MainMenu.EntryCount=8
3:844 0:000 Use anime=Anim_1_Logo frames=26
4:728 0:884 Found Mouse device:
4:728 0:000 GUI ready
196:437 191:708 BootOption of the entry is empty
196:437 0:000 StartLoader() start
196:437 0:000 Finally: Bus=99773kHz CPU=3092MHz
196:437 0:000 Kernel and Kext Patches:
196:437 0:000 Allowed: y
196:437 0:000 Debug: n
196:437 0:000 KernelCpu: n
196:437 0:000 Lapic: n
196:437 0:000 AICPUPM: n
196:437 0:000 AppleRTC: y
196:437 0:000 KernelPm: n
196:437 0:000 FakeCPUID: 0x0
196:437 0:000 ATIController: <null string>
196:437 0:000 ATIDataLength: 0
196:437 0:000 0 Kexts to load
196:437 0:000 0 Kexts to patch
196:437 0:000 Loading boot.efi status=Success
196:627 0:190 GetOSVersion: : 10.10
196:627 0:000 insert table 9 for dev 0:0
196:627 0:000 insert table 9 for dev 0:0
196:628 0:000 Trusting SMBIOS...
196:628 0:000 Detected alternating SMBIOS channel banks
196:628 0:000 Channels: 1
196:628 0:000 Interleave: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23
196:628 0:000 SMBIOS Type 17 Index = 0 => 0 0:
196:628 0:000 BANK0 DIMM0 EMPTY
196:628 0:000 partNum=SH564568FH8N0QHSCR
196:628 0:000 SMBIOS Type 17 Index = 1 => 1 1:
196:628 0:000 BANK0 DIMM1 1333MHz 2048MB
196:628 0:000 mTotalSystemMemory = 2048
196:628 0:000 SMBIOS Type 17 Index = 2 => 3 3:
196:628 0:000 BANK0 DIMM3 1333MHz 2048MB
196:628 0:000 mTotalSystemMemory = 4096
196:628 0:000 NumberOfMemoryDevices = 3
196:628 0:000 Type20[0]->End = 0x1FFFFF, Type17[1] = 0x800
196:628 0:000 Table 131 is present, CPUType=31
196:628 0:000 Change to: 903
196:628 0:000 RSDT 0x7CA8C028
196:628 0:000 FADT from RSDT: 0x7CA8C0E0
196:628 0:000 XSDT 0x7CA8C070
196:628 0:000 FADT from XSDT: 0x7CA98490
196:628 0:000 Xsdt reallocation done
196:628 0:000 old FADT length=10C
196:628 0:000 Found OperationRegion(GNVS, SystemMemory, 7CEC3E18, ...)
196:628 0:000 Found OperationRegion(MCHT, SystemMemory, FED10000, ...)
196:628 0:000 Found OperationRegion(RCRB, SystemMemory, FED1C000, ...)
196:628 0:000 Found OperationRegion(CPSB, SystemMemory, 7CA87E18, ...)
196:628 0:000 Found OperationRegion(IGDM, SystemMemory, 0, ...)
196:628 0:000 Found OperationRegion(EWMI, SystemMemory, FF000000, ...)
196:628 0:000 Found OperationRegion(SMBC, SystemMemory, 0, ...)
196:628 0:000 Found OperationRegion(GCAD, SystemMemory, 7CEC6018, ...)
196:628 0:000 Found OperationRegion(PRFA, SystemMemory, 7CEC4018, ...)
196:628 0:000 Found OperationRegion(TMMB, SystemMemory, FED40000, ...)
196:628 0:000 Found OperationRegion(TVID, SystemMemory, FED40F00, ...)
196:628 0:000 Found OperationRegion(TPMR, SystemMemory, FED40000, ...)
196:639 0:011 Apply DsdtFixMask=0x9FE6F9D7 new way
196:639 0:000 drop _DSM mask=0xFFFF
196:639 0:000 ========= Auto patch DSDT Starting ========
196:639 0:000 VideoCard devID=0x104010DE
196:639 0:000 DisplayADR1[0] = 0x10000, DisplayADR2[0] = 0x0
196:639 0:000 USBADR[0] = 0x1A0000 and PCIe = 0xFFFE
196:640 0:000 USBADR[1] = 0x1D0000 and PCIe = 0xFFFE
196:640 0:000 first CPU found at 789D offset 78A0
196:640 0:000 score candidate at 7899
196:640 0:000 score inserted in acpi_cpu_score _PR_
196:640 0:000 Found ACPI CPU: CPU0 And CPU1 And CPU2 And CPU3 And CPU4 And CPU5 And CPU6 And CPU7
within the score: _PR_
196:640 0:000 Found PCIROOTUID = 0
196:640 0:000 Start RTC Fix
196:640 0:000 found RTC Length not match, Maybe will case CMOS reset will patch it.
196:640 0:000 found RTC had IRQNoFlag will move -3 bytes
196:640 0:000 ...len=C35E
196:640 0:000 new size written to 2784 shift=0 len=C35E
196:640 0:000 len after correct outers C35E
196:640 0:000 Start TMR Fix
196:640 0:000 Start PIC Fix
196:641 0:000 PIC size=A5 at 2628
196:641 0:000 found CRS at 263C size 8D
196:641 0:000 found PIC had IRQNoFlag will move -3 bytes
196:641 0:000 Fix Device PIC size -3
196:641 0:000 Start HPET Fix
196:641 0:000 Start Display0 Fix
196:642 0:000 Found internal video device FFFF@4009, unusable
196:642 0:000 Creating DSM for NVIDIA card
196:642 0:000 patch Display #0 of Vendor=0x10DE in DSDT new way
196:642 0:000 Start NetWork Fix
196:642 0:000 found NetWork device [0x001C0004:0] at 3C86 and Name is PXSX
196:642 0:000 NetworkADR1=1C0004 NetworkADR2=0
196:642 0:000 network DSM created, size=5F
196:642 0:000 Start SBUS Fix PCI=152A len=C346
196:642 0:000 device (SBUS) found at 5458
196:642 0:000 SBUS code size fix = 0x0000005D
196:642 0:000 patch HDEF in DSDT
196:643 0:000 Start HDA Fix
196:643 0:000 found HDA device NAME(_ADR,0x001B0000) And Name is HDEF
196:643 0:000 NewName HDEF already present, renaming impossibble
196:643 0:000 Start HDMI133 Fix
196:643 0:000 have no HDMI device while HDMIADR2=1
196:643 0:000 HDMIADR1=10000 HDMIADR2=1
196:643 0:000 with default properties
196:643 0:000 Start USB Fix
196:644 0:000 USB bridge[1A0000] at 4AA9, size = 3A0
196:644 0:000 found slave _DSM, skip
196:644 0:000 USB bridge[1D0000] at 456D, size = 53A
196:644 0:000 found slave _DSM, skip
196:644 0:000 Start _WAK Return Fix
196:644 0:000 _WAK Method find return data, don't need to patch.
196:644 0:000 return len=C46B
196:644 0:000 deleting device CRT_
196:645 0:000 deleting device DVI_
196:645 0:000 deleting device SPKR
196:645 0:000 deleting device ECP_
196:645 0:000 deleting device LPT_
196:645 0:000 deleting device FDC0
196:646 0:000 deleting device ECP1
196:646 0:000 deleting device LPT1
196:647 0:000 Start PNLF Fix
196:647 0:000 found PWRB at 4292
196:647 0:000 Start _S3D Fix
196:647 0:000 OperationRegion (GNVS...) corrected to addr=0x7CEC3E18
196:647 0:000 OperationRegion (MCHT...) corrected to addr=0xFED10000
196:647 0:000 indirect name=SRCB
196:647 0:000 OperationRegion (RCRB...) corrected to addr=0xFED1C000
196:647 0:000 OperationRegion (CPSB...) corrected to addr=0x7CA87E18
196:647 0:000 indirect name=ASLB
196:647 0:000 ... value not defined
196:647 0:000 OperationRegion (IGDM...) corrected to addr=0x0
196:647 0:000 OperationRegion (EWMI...) corrected to addr=0xFF000000
196:647 0:000 OperationRegion (SMBC...) corrected to addr=0x0
196:647 0:000 OperationRegion (GCAD...) corrected to addr=0x7CEC6018
196:647 0:000 OperationRegion (PRFA...) corrected to addr=0x7CEC4018
196:647 0:000 OperationRegion (TMMB...) corrected to addr=0xFED40000
196:647 0:000 OperationRegion (TVID...) corrected to addr=0xFED40F00
196:647 0:000 OperationRegion (TPMR...) corrected to addr=0xFED40000
196:647 0:000 Start ADP1 fix
196:647 0:000 no device(AC) exists
196:647 0:000 Start Darwin Fix
196:647 0:000 Name _OSI present at 0x1C8C, renaming to OOSI
196:647 0:000 Name _OSI present at 0x8363, renaming to OOSI
196:647 0:000 Name _OSI present at 0x836A, renaming to OOSI
196:647 0:000 Name _OSI present at 0x8386, renaming to OOSI
196:647 0:000 Name _OSI present at 0x83A6, renaming to OOSI
196:647 0:000 Name _OSI present at 0x83C6, renaming to OOSI
196:647 0:000 Name _OSI present at 0x83E4, renaming to OOSI
196:647 0:000 Name _OSI present at 0x8400, renaming to OOSI
196:647 0:000 Name _OSI present at 0x841C, renaming to OOSI
196:647 0:000 Start SHUTDOWN Fix len=C540
196:648 0:000 ========= Auto patch DSDT Finished ========
196:648 0:000 Drop tables from Xsdt, SIGN=SSDT TableID=CpuPm Length=2850
196:648 0:000 Xsdt has tables count=8
196:648 0:000 Table: SSDT CpuPm 2850 dropped
196:648 0:000 corrected XSDT length=92
196:648 0:000 Drop tables from Xsdt, SIGN=SSDT TableID=Cpu0Ist Length=2474
196:648 0:000 Xsdt has tables count=7
196:648 0:000 Table: SSDT Cpu0Ist 2474 dropped
196:648 0:000 corrected XSDT length=84
196:648 0:000 Patch table: SSDT SataTabl
196:648 0:000 SSDT len = 0x36D
196:648 0:000 Drop tables from Xsdt, SIGN=XXXX TableID= Length=0
196:648 0:000 Xsdt has tables count=6
196:648 0:000 corrected XSDT length=84
196:648 0:000 CPUBase=0 and ApicCPUBase=1 ApicCPUNum=4
196:648 0:000 Maximum control=0x1F
196:648 0:000 P-States: min 0x10, max 0x1F
196:648 0:000 SSDT with CPU P-States generated successfully
196:648 0:000 SSDT with CPU C-States generated successfully
196:648 0:000 EdidDiscovered size=0
196:648 0:000 mem_detected 1073741824
196:648 0:000 read_nVidia_ROM
196:648 0:000 Using PRAMIN fixups
196:805 0:156 patch_nvidia_rom
196:805 0:000 version 75.19.4F.00.00
196:805 0:000 nVidia GeForce GT 520 1024MB NVD9 [10DE:1040] ::
196:805 0:000 PcieRoot(0x0)\Pci(0x1,0x0)\Pci(0x0,0x0)
196:805 0:000 devprop_add_nvidia_template
196:805 0:000 default_NVCAP: 04000000-00000300-0C000000-00000007-00000000
196:805 0:000 USB Controller [8086:1C2D] :: PcieRoot(0x0)\Pci(0x1A,0x0)
196:805 0:000 HDA Controller [8086:1C20] :: PcieRoot(0x0)\Pci(0x1B,0x0) => detected codec: 1106:4397
196:805 0:000 USB Controller [8086:1C26] :: PcieRoot(0x0)\Pci(0x1D,0x0)
196:805 0:000 stringlength = 3034
196:805 0:000 CurrentMode: Width=1280 Height=1024
196:805 0:000 FSInjection: not started - gFSInjectProtocolGuid not found
196:806 0:000 Preparing kexts injection for arch=x86_64 from EFI\CLOVER\kexts\10.10
196:806 0:000 Custom boot is disabled
196:806 0:000 Closing log
Aparentemente está carregando o config.plist, mas coisas como tema, velocidade do mouse, outros discos, não estão tendo efeito.
Agradeço sua ajuda e aguardo resposta.
