Dahnark

Hey guys I have done the usb with Clover and the installer but I have some problems. First, when I try to boot the installer from clover, do nothing, I can't start it. Clover work but the installer (installed with the terminal command in a different partition of clover) don't run. The usb is in Mbr and I do that following tutorials of Olarila. Second, when I enable in secure mode uefi boot, I got an screen that said that the system found unauthorized changes on the firmware, operating system or uefi drivers. My PC is a 3770k with an asus p8z77-v deluxe and GTX 670. If I disables csm in bios the vga can't work... Ideas?

I have got a great performance in my hackintosh, even Mavericks loads faster than 8.1. Really amazing... I have to do some benchmark, do you recommend me geekbench 2 or 3? Really with 3 I can't do 64 bits (no crack for this xD). Here the videohttp://www.youtube.com/watch?v=SYymktGuySw

I can fix it. One question, what fakesmc is compatibility with mavericks? I am searching and I have nothing clear...

Hey guys, I have two problems: - GraphicsEnabler=No. I need to use it for can get desktop. I solved it with 10.8.5 turning off an option in bios, multimonitor mode for hd 4000 but here... nothing. - Lan drivers. I used the multishit for install two drivers that I need, usb 3 universal and lan, like in 10.8.5, first works fine, second nothing. Can I need a new version of multishit? I used 5.5.1 The only that I have used is: chimera bootloader and two drivers named above. No more. I think that all works fine except that. I have tried sleep mode and works too. For sound I have external usb card, no problem with this. Graphic card I think that works fine, but when I have ethernet enabled, I'll try Guild Wars 2 full settings, is the best way to know if 670 works xD How can I solve overall lan drivers? My pc is 3770k, gtx 670 and p8z77v-deluxe. A greeting!

is it possible to do a usb installer like raw image of mountain lion?

okay thanks!

Really I want to say that I can't use that solve because I only have one monitor. I need the "dual monitor" of igpu option in bios for Mirillis Action (check the link that I said you). When Windows detects that I have 2 screens (I only have one, but you can set 1 real and 1 virtual) for doing that Mirillis Action can enable Intel quick sync. But with the option in bios disabled it doesn't work. I need that option enabled but that OS X don't check intel hd 4000. Is it possible?

But I only have one monitor...

Thank you! All works fine. Dual boot with Windows 8.1 too. I am doing a time machine copy for safety. I have a question. I usually use Mirillis Action in Windows 8 to record using Intel Quick Sync without have 2 monitors using this http://mirillis.com/en/products/tutorials/action-tutorial-intel-quick-sync-setup_for_desktops.html#top Then, how I have disabled the option of igpu work in other monitor, it can't work in Windows 8 like before. Is it possible to solve this problem in OS X matched with intel HD 4000? keeps the option on bios that works with more monitors and disable that OS X try to detect it? I have tried enable the option in bios. Then when I boot the screen become black when try to load the desktop. With "GraphicsEnabler=No" happens the same. Any way to solve this? Thank you!

Well, I have a problem with the sound (my have an external card, that it's works fine with 10.8.2) Actually it's detected by the system, but not sound good... With voodoo driver can I solve this? The sound with g930 works fine. Only works bad with hercules muse pocket LT3 New edit: In one usb work fine (frontal and is usb3) in the other works bad or is not detected (usb 2 detected but bad work, usb3 is not detected) EDIT: okay it works fine now in back usb (the pc troll me, and with OS X a lot of...) The usb 3 is not detected. I should install usb 3 with multishit no?

Okay thank you very much Ethernet works fine. Chameleon works fine but it doesn't have the flag GraphicsEnabler=No because in customice don't appear. I am trying to add it but is not possible because with Chameleon wizard I can't edit org.chameleon.boot.plist because... it's not in the SSD. I used show hide file and not appear... How can I solve this? Thanks again EDIT: it works without GraphicsEnabler=No xD perfect all!! thank you very much!

Nop, the last bios version is bugged. I almost have to change the motherboard for this. No work both, os x and Windows. I have news. It work without -x disabling that igpu work with some monitors (Really I only have one xD). Then now only have to fix drivers (usbs and lan) and bootloader. When I installed chimera in the other times, it break the boot and I get "system uptime..." What bootloader install that it can get GraphicsEnabler=No flag like chameleon?

Is impossible disable onboard card, I can "disable" 670, extracting it xD. I can not disable that os x detect it? Really is impossible disable intel hd 4000. My bios not allow that, is a great fail but...

GTX 670. My actual bios adjustement works fine with 10.8.2 It detected the 670 fine, I could even play Guild Wars 2 full setting in OS X and use After Effects with a big project. I only had to add GraphicsEnabler=No But now only can get access with -x (GraphicsEnabler=No, too) The lan card I could fix one time, doing copy paste from 10.8.2 (I don't remember if was library/extension (all kext), system/library/extension (only some kext), extra folder, and get internet on 10.8.5, but I lost that, I reinstall all some times and repeat copy paste and I don't have can get it again. Now I haven't installed kext. Only boot.

I have no internet on 10.8.5 (and when I use the launchpad, it's not working good, no smooth). I have to post screens with my mobile, I hope you can see it http://gyazo.com/4ef0f3999a580ad951f6f46d1025981c http://gyazo.com/338ef3a50dfad10bc4b4b8ef3fc2b62e

My bios doesn't allow disable cards. Only choose the main, GTX or 4000

Hello there. I used iatkos ml2 version without problems, it works fine with graphicsenabler=no. But with 10.8.5 I can't use the PC without add -x My pc is i7 3770k, motherboard p8z77v deluxe and graphic card is gtx 670 and Intel 4000. I followed the steps on this Web. I created an usb with the raw image and I install (the first part) without problems. Then when I have to finish the instalation (the part of the account) to get the desktop, I have to use -x. Always. I have installed multishit like in iatkos ml2 but no work. I have the older files (10.8.2) in the time machine. But I can't solve this. Now I am in desktop with graphics enabler = no and -x. I haven't Internet and the PC detect without problem the 670. I got fails when I don't use - x matched with iousbfamily. I suppose that this kext fail, but I have tried to use the same kext from 10.8.2 and no work. How can I solve this? Thanks!