Vikerness

Stuck2 is because you deleted too much inside system\libraries\extensions Only delete video drivers and/or exact drivers that you know are causing problems. Not everything inside and preferably no more than 1 driver at a time, in your case just the bluetooth driver maybe To get past stuck1 try booting in safe mode: -x or maybe: -x -v npci=0x2000 cpus=1

It did installed on the mbr but somewhere in the installer log i noticed something like "can not make disk bootable at this stage" "disk cannot be made bootable at all" The partition was made from windows with paragon hard disk manager and set to active After installation i cant boot from it at all. Chimera from multishit will say boot0:done then reboot the pc, i tried every instalation method from chameleon wizard and nothing works, manual chameleon installation doesnt work either getting stuck at the same boot0:done and clover will get stuck at the blinking line Help me understand please Edit: I've installed it on another drive, this time i made the partitions fat32 and reformatted it with disk utility to hfs+ before installation and now the boot loader worked .... Next (and hopefully last problem) is my gtx 570. Booting from usb i get the correct 1080p resolution but it freezes with a white screen. Booting directly from the HDD my video card isn't recognised at all (with GraphicsEnabler Yes and no PCIRoot as my id is 0) my res is 1280x1024 and everything is choppy. Edit2: So i've copied nvda* kexts from usb to hdd and if i boot from the hdd the monitor turns off but if i boot from the usb everything works. same kexts ! probably different boot arguments? but what....? Edit3: Got it working by also adding IGPEnabler No to Chameleon. DP8 or usb kexts though, GM ones wouldn't work

Hellow. based on your install instructions: If you want to install the boot loader in this partition and you use MBR (not GUID, like if you already have Windows in the HD), it must be a primary (not extended/logical) partition. Is it safe to asume the mbr kexts are already patched in and the installer works on mbr partitions, right ?