Aceshighm3

I'm also having this same issue with a g3220 pentium haswell. it was getting stuck at xcpm registered, after trying the xcpm kernel it gets stuck at hfs: mounted usb10.9 on device root_device. I even did the PMpatch on the motherboard, but still no luck.

THANK YOU ARTUR!!!! I appreciate your help VERY much!!! ok here is what happened: i copied the dsdt.aml to the desktop, ran 'multishit' put user dsdt. selected 887 sound (current), trim, macmini6.1. install went successfully. i restarted, ML loads in like 3 seconds, sleep/wake for display on DVI works perfectly. system sleep/wake works , however when the system wakes, the mouse and keyboard and very jumpy(lag) . before that, everything is smooth. It feels like the processors are 100% loaded, but I checked and both processors are idle. Also the sound does not work, it worked before when I ran multishit without dsdt and selected 887 current (without dsdt). should i try again with that option? Just as information for anyone who might be interested: I checked with CPUID for mac, and the chip shows as 2.6ghz, doesn't look like speedstep is working. I checked the power draw, the computer is pulling around 43 watts avg at IDLE, and about 58 watts under full load. Temperature range is between 29C and 39C idle to load. ambient temp in room is 25 C. geekbench score is approx 4800 range , which beats my other hackintosh with a stock quad core q6600 processor @ 2.4ghz xbench results are approx around 285-300 range. however i have to uncheck the thread test, or else the test hangs at the thread test. board and processor msi h61m-p31 + g1610 Ivy bridge Celeron 60 USD vid card GeForce 210 1GB 64-bit DDR3: 30 USD psu 500watt corsair: 50 USD kingston ddr3 1600mhz (running at 1333 due to chip) : 40 USD intel ssd: 70 USD + about 60 USD worth of rebates = total cost ~190USD i will update to 10.8.2 now and see if that makes any difference to the system, as i read that better ivy bridge support is included in the update.

thanks for the assistance, here is the 'runme' file contents: ideally i'd like to have the system as close to functional and stable. any other hardware information i need to provide? Send me admin3’s Mac Pro.zip

Hello, Can someone help me with a patch for my board as i could not find it in the motherboard data base. msi h61m-p31 (g3) http://msi.com/product/mb/H61M-P31--G3-.html#/?div=Detail http://msi.com/product/mb/H61M-P31--G3-.html#/?div=Detail