ruorbe

Hi again, I've found the key was on the frame buffer Patched and running! Sorry for the inconvenience

Here you are. ioreg.zip

Hi Mirone, Im trying to get HDMI audio but unsuccessful yet. I'd really appreciate your help, it's the only thing left to achieve a perfect working system. Regarding Sound, I've got audio in,out, mic working and HDMI is present in system profiler, not working when connected display though. I'm on Mac OS X 10.8.5. Many Thanks CodecDump.zip AppleHDA.kext.zip DSDT.aml.zip

Changed ACPI_SMC_PlatformPlugin from macbook pro 8,1 and it works perfectly. Thanks

Double check this time NullPM isn't loaded and still only 2 states (minimum and maximum) Send me .zip

Hello Artur Did you find sth weird in the DSDT? Thanks

I've made my own DSDT and I got almost everything working smoothly Shutdown, sleep, audio, etc. but I cannnot get speedstep working I only get 2 steps. I've tried ssdt, generate P and c states and both without any luck. I'd really appreciate your advice. Thanks. Intel DH57DD ATI HD 5600 i3 550 Send me .zip

The family you know... Which patch should I apply ? Thanks

Hello, I need help to patch my DSDT in order to achieve Speedstep, sound and brightness. INTEL DH57DD i3 550 ATI 5600 series Thanks Send me Ruben’s iMac.zip

Ok Thanks

Hi Arthur, Eventually I've seen what's the Kernel Panic about CP3 has no HPET assigned to it Also I've noticed that it recognised my CPU as a i7 and it's a i5 Thanks.

Yes I did it, Thats the report, I cannot see KP boots fine into the system and then in a while freezes. DarwinDump.htm.zip

Hi, I've done it but when delete nullpowermanagement, it gets into the OS and in less than a minute it freezes. What can it be the cause?

Hi Arthur, Everything is up and running except for the Nullpowermanagement, should I patch the AICPM as in sandybridge processors first? Thanks again

Would be great!!!not as fun though Many thanks Arthur.

Hi, I'd like my DSDT to be patched to get sleep, brightness, sound and speedster. Lenovo G580 i5 3210m HD 4000 Has the AICPM to be patched the same way sandy bridge is? Thanks a lot. Send me Isa’s MacBook Pro.zip

With DSDT

Without DSDT

Hi Artur. After reading and testing a lot, I figure out that the error is in the DSDT when I apply my mobo patch I lost the USBs. Can you help me out with DSDT patching. Thats my untoched DSDT. ASUS X53E MOBO K53SD Sandybridge i5 2410M HD 3000 Thanks a lot Send me Ruben’s MacBook Pro.zip

I dont think thats the root of my non-working Usb ports' issue. My Usb ports didnt work before I set volume and eject controls through virtual-mate

Hello I can't see anything PMAP: PCID enabled Darwin Kernel Version 12.2.0: Sat Aug 25 00:48:52 PDT 2012; root:xnu-2050.18.24~1/RELEASE_X86_64 vm_page_bootstrap: 1894816 free pages and 54880 wired pages kext submap [0xffffff7f80741000 - 0xffffff8000000000], kernel text [0xffffff8000200000 - 0xffffff8000741000] zone leak detection enabled standard timeslicing quantum is 10000 us standard background quantum is 2500 us mig_table_max_displ = 74 TSC Deadline Timer supported and enabled Refusing new kext com.apple.driver.AppleRTC, v1.5: already have prelinked v1111.0. corecrypto kext started! Running kernel space in FIPS MODE Plist hmac value is 735d392b68241ef173d81097b1c8ce9ba283521626d1c973ac376838c466757d Computed hmac value is 735d392b68241ef173d81097b1c8ce9ba283521626d1c973ac376838c466757d corecrypto.kext FIPS integrity POST test passed! corecrypto.kext FIPS AES CBC POST test passed! corecrypto.kext FIPS TDES CBC POST test passed! corecrypto.kext FIPS AES ECB AESNI POST test passed! corecrypto.kext FIPS AES XTS AESNI POST test passed! corecrypto.kext FIPS SHA POST test passed! corecrypto.kext FIPS HMAC POST test passed! corecrypto.kext FIPS ECDSA POST test passed! corecrypto.kext FIPS DRBG POST test passed! corecrypto.kext FIPS POST passed! AppleACPICPU: ProcessorId=1 LocalApicId=0 Enabled AppleACPICPU: ProcessorId=2 LocalApicId=2 Enabled AppleACPICPU: ProcessorId=3 LocalApicId=1 Enabled AppleACPICPU: ProcessorId=4 LocalApicId=3 Enabled AppleACPICPU: ProcessorId=5 LocalApicId=4 Disabled AppleACPICPU: ProcessorId=6 LocalApicId=5 Disabled AppleACPICPU: ProcessorId=7 LocalApicId=6 Disabled AppleACPICPU: ProcessorId=8 LocalApicId=7 Disabled AppleACPICPU: ProcessorId=9 LocalApicId=8 Disabled AppleACPICPU: ProcessorId=10 LocalApicId=9 Disabled AppleACPICPU: ProcessorId=11 LocalApicId=10 Disabled AppleACPICPU: ProcessorId=12 LocalApicId=11 Disabled AppleACPICPU: ProcessorId=13 LocalApicId=12 Disabled AppleACPICPU: ProcessorId=14 LocalApicId=13 Disabled AppleACPICPU: ProcessorId=15 LocalApicId=14 Disabled AppleACPICPU: ProcessorId=16 LocalApicId=15 Disabled calling mpo_policy_init for TMSafetyNet Security policy loaded: Safety net for Time Machine (TMSafetyNet) calling mpo_policy_init for Sandbox Security policy loaded: Seatbelt sandbox policy (Sandbox) calling mpo_policy_init for Quarantine Security policy loaded: Quarantine policy (Quarantine) Copyright © 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. MAC Framework successfully initialized using 16384 buffer headers and 10240 cluster IO buffer headers IOAPIC: Version 0x20 Vectors 64:87 ACPI: System State [s0 S3 S4 S5] (S3) RTC: Only single RAM bank (128 bytes) AppleIntelCPUPowerManagement: Turbo Ratios 0046 AppleIntelCPUPowerManagement: (built 23:03:24 Jun 24 2012) initialization complete AppleACPIBatteryManager Loading... AppleACPIBatteryDevice loading... PFM64 (36 cpu) 0xf80000000, 0x80000000 [ PCI configuration begin ] mbinit: done [64 MB total pool size, (42/21) split] Pthread support ABORTS when sync kernel primitives misused console relocated to 0xf80000000 PCI configuration changed (bridge=5 device=1 cardbus=0) [ PCI configuration end, bridges 4 devices 11 ] rooting via boot-uuid from /chosen: 3F08E8F3-FA17-3736-A75C-EA81D58DAA64 Waiting on IOProviderClassIOResourcesIOResourceMatchboot-uuid-media com.apple.AppleFSCompressionTypeZlib kmod start com.apple.AppleFSCompressionTypeDataless kmod start com.apple.AppleFSCompressionTypeZlib load succeeded com.apple.AppleFSCompressionTypeDataless load succeeded AppleIntelCPUPowerManagementClient: ready Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/IDE0@1F,2/AppleIntelPchSeriesAHCI/CHN0@0/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOBlockStorageDriver/WDC WD3200BPVT-80ZEST0 Media/IOGUIDPartitionScheme/Hard Drive@2 BSD root: disk0s2, major 1, minor 3 Kernel is LP64 ath_get_caps[4038] rx chainmask mismatch actual 1 sc_chainmak 0 0.718043: ath_get_caps[4013] tx chainmask mismatch actual 1 sc_chainmak 0 0.722498: Atheros: mac 192.2 phy 14.0 radio 12.0 0.722510: Use hw queue 0 for WME_AC_BE traffic 0.722518: Use hw queue 1 for WME_AC_BK traffic 0.722525: Use hw queue 2 for WME_AC_VI traffic 0.722532: Use hw queue 3 for WME_AC_VO traffic 0.722540: Use hw queue 8 for CAB traffic 0.722546: Use hw queue 9 for beacons 0.722692: wlan_vap_create : enter. devhandle=0xc487e658, opmode=IEEE80211_M_STA, flags=0x1 0.722749: wlan_vap_create : exit. devhandle=0xc487e658, opmode=IEEE80211_M_STA, flags=0x1. 0.722844: start[1012] sc->sc_inuse_cnt is at offset: 203c, sizeof(_sc->sc_ic) is 25f0 Waiting for DSMOS... macx_swapon SUCCESS AirPort_AtherosNewma40: Ethernet address e0:b9:a5:ae:40:fd IO80211Controller::dataLinkLayerAttachComplete(): adding AppleEFINVRAM notification IO80211Interface::efiNVRAMPublished(): 23.081407: ATHR: unknown locale: 60 AtherosNewma40P2PInterface::init name role 1 this 0xffffff8011a9e000 AtherosNewma40P2PInterface::init() role 1 AirPort: Link Down on en0. Reason 1 (Unspecified). en0::IO80211Interface::postMessage bssid changed 23.721866: ATHR: unknown locale: 60 Welcome to ControllerMate v4.6 (64-bit) ElanTech Touchpad driver v1.7.0 by EMlyDinEsHMG © 2012 Elan: Detecting the touchpad Previous Shutdown Cause: 3 DSMOS has arrived Elan: Touchpad found, Assuming hardware version 3 (with firmware version 0x450f01) No interval found for . Using 8000000 Sound assertion in AppleHDAController at line 1294 Elan: Placing the Touchpad into Absolute mode Elan: Successfully placed touchpad into Absolute mode Transcript Offline - Buffer Pool Allocate [181000] failed Elan: MouseInformation { 0x20, 0x03, 0x64 } Elan: Enabling the touchpad 24.424778: setWOW_PARAMETERS:wowevents = 2(1) 33.557112: setDISASSOC from ATH_INTERFACE_CLASS disconnectVap 33.557142: switchVap from 1 to 1 33.572426: performCountryCodeOperation: Not connected, scan in progress[0] 33.578619: ATHR: unknown locale: 60 33.594316: ATHR: unknown locale: 60 33.594989: ATHR: unknown locale: 60 en0: 802.11d country code set to 'GB '. 33.712248: ATHR: unknown locale: 60 en0: Supported channels 1 2 3 4 5 6 7 8 9 10 11 12 13 en0: BSSID changed to 84:c9:b2:ba:23:98 en0::IO80211Interface::postMessage bssid changed AirPort: Link Up on en0 en0: BSSID changed to 84:c9:b2:ba:23:98 en0::IO80211Interface::postMessage bssid changed 34.424144: apple80211Request[10292] Unsupported ioctl 111 AirPort: RSN handshake complete on en0 42.779028: ATHR: unknown locale: 60 43.399173: ATHR: unknown locale: 60 43.415192: ATHR: unknown locale: 60 nspace-handler-set-snapshot-time: 1362153214 NoEjectDelay --Info-- init 4.1.0-10.8 NoEjectDelay --Info-- start NoEjectDelay --Info-- device: Keyboard (ApplePS2Keyboard) 47.084276: ATHR: unknown locale: 60 52.302734: ATHR: unknown locale: 60 No interval found for . Using 8000000 No interval found for . Using 8000000 NoEjectDelay --Info-- device: ControllerMate (Virtual Keyboard) NoEjectDelay --Info-- device: ControllerMate (Virtual Keyboard) NoEjectDelay --Info-- device: ControllerMate (Virtual Consumer) NoEjectDelay --Info-- device: ControllerMate (Virtual Keyboard) EAPD: Sending Command EAPD: Enabled Successfully considerRebuildOfPrelinkedKernel org.pqrs.driver.NoEjectDelay triggered rebuild Sandbox: sandboxd(263) deny mach-lookup com.apple.coresymbolicationd Rubens-MacBook-Pro:~ Ruben$

I found that Ruben$ sudo kextcache -prelinked-kernel Password: Can't record kext in identifier lookup dictionary; no identifier. Can't record kext in identifier lookup dictionary; no identifier. Can't record kext in identifier lookup dictionary; no identifier. Can't record kext in identifier lookup dictionary; no identifier. Kernel file /mach_kernel does not contain requested arch: i386 BJUSBLoad.kext - no dependency found for com.apple.kernel.libkern. BJUSBLoad.kext is missing dependencies (including anyway; dependencies may be available from elsewhere) BJUSBLoad.kext - no dependency found for com.apple.kernel.libkern.

Hello. Really hard dude, I've got it , though. If u could give me a hand about the USB ports I'd really appreciated. It's the only thing left for a 100%vanilla hack. Thanksa lot

Hi Artur I cant find any solution about the USB ports missing also I'd like to ask you how to enable HDMI audio if you dont mind... Thanks.

That's odd it just has 3 usb2.0 and I've opened it up and there well-conected.