Subject: Testing Report & Offer to Help: Intel Core i3-1215U (Alder Lake-U, 0x46B3)
Hello everyone, and thank you to the developer(s) for the hard work on this project.
I am testing the experimental WhateverXe driver on an Alder Lake-U chip. I am posting this to share my structured diagnostics and to explicitly offer my hardware as a dedicated test bed to help push ADL-U support forward.
Hardware & Configuration:
- Laptop: HP 15s fq5326tu
- CPU: Intel Core i3-1215U (Alder Lake-U)
- iGPU: Intel UHD Graphics (64 EUs) - Device ID: 0x46B3
- macOS: macOS Tahoe 26.7.2
- Kexts: Lilu -> AMFIPass -> WhateverXe (v0.6.1)
- Boot-args: -allow3d -disablegfxfirmware -igfxdvmt -wexdbg -liludbgall
- WhateverXeGraphics.pkg: Installed successfully inside macOS.
The Issue:
macOS boots perfectly and OpenCore injects the kexts without errors. However, the driver fails to bind to the hardware.
- kextstat confirms org.b00t0x.AppleIntelTGLCompat and org.b00t0x.WhateverXe are successfully loaded into kernel memory.
- system_profiler SPDisplaysDataType shows the GPU with only 7 MB VRAM, "Kernel Extension Info: No Kext Loaded", and no Metal support.
- The kernel log shows the driver halting immediately at the hardware handshake with no further errors:
kernel: (AppleIntelTGLCompat) AppleIntelTGLCompat : revision 0.5.0 started, physical-owner/binding selection
Attached Diagnostics:
I have attached AlderLake-U-WhateverXe_Logs.zip, which contains the following 6 diagnostic files inside:
1. 01_kernel_graphics.log (Complete kernel log from the last boot)
2. 02_system_profiler.log (Display state)
3. 03_ioreg_dump.log (iGPU PCI topology)
4. 04_kextstat.log (Loaded kexts)
5. 05_nvram.log (Boot arguments)
6. opencore-bootlogs.txt (OpenCore boot log showing successful kext injection)
(Note: The OpenCore log shows my AirPort_RTW88.kext failing to patch with an "Invalid Parameter" error, but I am ignoring Wi-Fi to focus solely on the iGPU binding).
Next Steps & Offer for Testing:
Since the GitHub Issues are closed, I wanted to reach out here. I am completely down to help with future updates. I have a fully functional setup and a stable USB boot environment. I am ready to:
- Test any pre-compiled custom builds of WhateverXe.
- Test specific framebuffer patches or boot-args.
- Provide any further logs or IOReg dumps needed to get this workingg.
This is everything I have tested so far. Thank you for your time and effort on this driver!