Borriel_69b

No luck

Hi. wow, you're right, boot time it only takes 30-35 seconds with trim disabled. After a good sleep, when I press power button computer seems to start (fans noise and LEDs bright) but I get a black screen. It doesn't respond to Kb/Mouse. I see nothing on screen, only black. I have to powerOff. I attach new Send_me files an last-boot log. log.txt.zip Send me PC4.zip

Hi. Now boot time is good (2 minutes). Audio is ok (although titles in Turkish...). Sleep is ok but wake fails. I attach new Send_me files and last-boot log. log.txt.zip Send me PC4.zip

Ok. Attached. CLOVER.zip Send me PC4.zip

Here it is. log.txt.zip

Thanks for the info! @Allan: only id 11 and 12 work. One shows headphones only and the other internal only. Is there a way to show both when using AppleALC? I also see the audio entries in Turkish. Why? @MalD0n: the DSDT provided by you makes my system load in 5:30 min. If I use my DSDT or none it only takes 2:00 minutes. Althought your DSDT shows earphones and internal when using AppleALC kext, my system doesn't wake from sleep properly. I need to restart computer with power button.

Finally I found a solution from other forum. I just added two patches to AppleAHCIPort.kext via clover Kexttopatch: fix I/O error for ICH10 (2 parts). Now I have sleep+wake. No HDD hanging or autoeject. All seems to work ok. All my "Sierra" settings are the same. These are the new patches (apart from one for "Orange internals icons" that I had in Sierra). <dict> <key>Comment</key> <string>fix I/O error for ICH10</string> <key>Disabled</key> <false/> <key>Find</key> <data> RYX2D5XCiciD4P5mhcl4D4TSdQs= </data> <key>Name</key> <string>AppleAHCIPort</string> <key>Replace</key> <data> iciD4P5mhckPmMFBCMyQkJCQdQs= </data> </dict> <dict> <key>Comment</key> <string>fix I/O error for ICH10</string> <key>Disabled</key> <false/> <key>Find</key> <data> icglQGACAD1AIAAAdQyB4b9///+Ji1EBAAA= </data> <key>Name</key> <string>AppleAHCIPort</string> <key>Replace</key> <data> kJCQkJCQkJCQkJCQkJCQkJCQkJCQkJCQkJA= </data> </dict> I have my internal Intel Graphic card disabled in BIOS. I use a "cheap" Geforce GT210 dedicated videocard. Mald0n: you recommended to change VoodoHDA to lilu+AppleALC but It doesn't work in my case because I don't use any DSDT.aml (nor SSDT.aml) which is mandatory because AppleALC.kext needs a right "layout-id" from DSDT.aml. I found a DSDT.aml which works with my computer (I attach here. I think it's the same from my fisrt post). Can anyboby patch this DSDT.aml to give a right "layout-id" to AppleALC? Thanks!! DSDT.zip

Ok I removed voodoohda but I'd have to keep AppleHDAdisabler.kext coz although Hsierra starts is very very slow. Now I have AppleALC sound but wake after a sleep doesn't work. No difference with voodoohda. One question: Has "SSDT.aml" be placed on the same folder as "DSDT.aml"?

Realtek ALC889

VoodooHDA 2.9.1

Sorry. I attach new one. The Last one seemed to be corrupt. Send me PC4.zip

At the end I found a Runme.app on my HDD. I attach. Thanks Send me PC4.zip

Sorry, I can't download Runme.app Error. 403 You aren't allowed to be here.

Hi. Thanks! I replaced CLOVER folder. I run ssdtPRGen.command. It generates some files on HSierra>Users>pc4>Library>ssdtPRGen with no errors but if fails on moving to /Extra folder on mounted EFI (Clover is not in EFI partiton. It'n on another HFS+ data volume). So I decide to copy 'ssdt.aml' on Clover>ACPI>patched (near dsdt.aml) and rebooted. Is it right? Then, system seems to start right but... : 1. Internal Icons are orange external 2. HWMonitor sensors are incomplete and HWMonitor closes after some time. 3. Sleep works but my KB/mouse USB can't wake. POWER button wakes but black screen apeears. No response I had to reboot.

Here it is. EFI.zip

Any news? Thanks

Attached new send_me files Send me iMac-de-PC4.zip

Here it is. Thanks Send me iMac-de-PC4.zip

I'm at the same point after several Clover and macOs 10.13.x updates. Any clue?

Hi, I need some help, if possible ... I was in mac 10.12 and all work ok. But, when I update to 10.13 I've got problems on sleep + wake and a problem with 1 HDD (de-attached auto. and no chance to mount again) When I put Hackintosh to sleep it needs more than 2 minutes with SDD+HDD led on all the time. After this time, it sleeps but when wake I get a black screen and only the mouse cursor. HDD led brighting again. No option to do anything else. After a time cursor becomes coloured wheel then hangs. Another tip: 1 of my HDD is unmounted auto. and no way to see in DU or 'diskutil list' again after 30-45 minuts of system start. I attach my clover config.plist, the unpatched DSDT, and modified one. If you need more files please tell. H61M-D2-B3.zip Thanks to all.

Hi, This is my first post. I've been reading all of you for a long time and now I have a problem with hibernation and need some help (if possible) I have Mavericks 10.9.3 in a ASUS P7P5D LE. I use Clover r2703. I attach my config.plist All my system runs ok except for hibernation. I tested "sudo pmset -a hibernatemode 29" and "hibernatemode=21" as many forums suggest, but I can't make my system "wake" from hibernation. "Sleep" works ok. When I put my system in "hibernation" computer goes to sleep right, but when I "wake" after reading the hibernation file the last "screen capture" before sleep appears but no mouse, no keyboard, no HDD lights... then I have to turn off+turn on and cancel hibernate mode to run system again. I also attached a patched DSDT file but there's no difference, my hackintosh doesn't start. If it can help I attach bdmesg. Can anyone help me please?? Thanks in advance. P7P55D LE.zip

Hi, I've found this from kexts.com http://www.kexts.com/downloads.php?do=file&id=1143 It's for Lion DP2 only. I'll try it tonight

Firstly, Hi to all! Great tutorial MaLdOn! This is the first Chameleon-baded Lion installer I found in Internet. Many I found are based on iBoot / XPC and needs 2 USB Pen to work (This ony needs one!!). Thanks! I followed step by step this tutorial, then I had to stop on 'Lion can't be installed in this computer' message, so I used the patched OSInstall.mpkg as you recommend. All worked ok. Installation continued... Now I have a new problem. I share a 1Tb 2nd HDD with MBR structure so Lion can't be installed. This HDD is partitioned by 3 parts: one first part for Snowleo (HFS+ jour.), Second NTFS part for 'shared' data Win/Snowleo, Third SWAP LINUX part for Ubuntu (Win7 & Ubuntu installed in other HDD). I know I can backup the whole HDD, convert MBR->GTP and restore but my NTFS part is almost full and making a backup is an slow procedure... if only I can avoid this step.... Now my question: is it possible to patch Lion installer in a way I can install in a MBR-based HDD? Or Can I Install a basic Lion in a 8 Gb Pen USB with GTP structure and then backup + restore HFS Lion part. to the MBR HDD? Many thanks again!!