dtonkz

@MaLd0n Hi, I'm tired of constantly rebooting the system. I wanted macos to run, even if it was the previous version, and I downloaded the monterey image and burned it to the flash disk. I copied the "..Raptor lake mod" efi as it is and tried to install it. I actually tried installing "Monterey" using the EFI folder I used for "Ventura". I erased the disk and started the installation. The installation is over and frankly I still "waited for the system to reset" again. However, after a few resets, the user creation screen came up and I created a profile because it made an Ethernet connection without any problems, and the system booted. # Ethernet works without the need to install any .kext. (E210 automatically recognized) # Bluetooth not working. # Wifi is not working. # CPU is running high frequently. (I can tell from the cooling fan noise) # Some of the USB does not work. # Hardware for audio appears to be USB2.0, I haven't tried it yet. # Video card (RX570) works naturally. I haven't tried with #UHD 770. # Toshiba HDD is ok, Samsung SSD is ok. # Runme app ran smoothly and saved the results. # The system may be missing, frankly, something I don't understand at all. However, after the installation of "Ventura", it did not reset even once after it was turned on. It is very fluid and continues to work without using "hackintool" or "OCC". Now I will try to delete the existing windows11 and run "Monterey". If I can do it properly, then I will reinstall Windows 11 and try for the EFI partition. Conclusion: I'm definitely having trouble installing "ventura" with "olarila ventura image" and "raptor lake mod". But it provides hassle-free installation for "monterey". Finally, I'm attaching the "runme app" results in the hope that it will work. In my opinion: "Ventura" definitely needs work on hackintosh. Because "ventura" doesn't work with same "EFI" but "monterey" does. Thank you for everything, I look forward to your feedback. Send me Mustafa-iMac-Pro.zip

@MaLd0n IORegistry result. Thank you again. Mustafa iMac.zip

@MaLd0n Hi, The system is constantly resetting. Windows Server throws an error and when I say "ok" to the warning, the mouse hangs and the system resets. I created new User and deleted old one, Windows Server error is gone. However, when I try to edit a file or open an application, the system resets without any action. I activated the kexts you gave for ethernet and wifi with opencore configurator, but ethernet and wifi did not work yet. I will try again. Thank you for your interest. Can you help with ACPI with runme app?

Hi, I have a few questions can you help? I downloaded the Ventura image, burned it to the usb stick with balenaetcher. I used "EFI.Opencore.Desktop.RaptorLake.MOD" as efi. Change in EFI folder explorer++. # After installation ethernet and wifi did not work. During the installation, the system reset after a few times "internet required" warning. # When it opened, I ran opencore configurator and mounted the EFI folder. # Run hackintool and it frezee app. Then the drivers and files on the desktop disappeared (finder didn't work) # Runme app worked but I can't copy the prepared file. There is no internet connection either. Whenever I log in and try to do something, the system freezes and resets after a while. In short, I open the system, but I cannot use it in any way. Here are the ones that don't work. Ethernet, Wifi, Bluetooth, Sound (hdmi sound ok, but mainboard not work) My system: CPU: Intel 13600K Cooler: 140mm Liquid Ram: G.Skill 16GB 3600Mhz SSD: Samsung 860 Evo 250GB HDD: Toshiba ABA300V 3TB GRAPHICS: RX 570 4GB MOBO: Msi Pro Z790-A Wifi DDR4 MOBO GRAPHICS: Intel UHD 770 (I'm not using) MOBO Ethernet: Intel i225-V MOBO Wifi/Bluetooth: Intel Wifi 6E AX211 160Mhz MOBO Audio: ALC4080 Monitor: DELL S2721DS (have speaker I'm using hdmi audio) My Efi; ACPI : SSDT-OLARILA700.aml Kexts: Lilu, VirtualSMC and Plugin SMCProcessor, itlwm, IntelBluetoothFirmware, IntelBluetoothInjector, IntelBTPatcher, AppleALC, AppleMCEReporterDisabler, RestrictEvents, WhateverGreen I produced iMac20.2 serial using GenSMBios and processed it to config.plist. BootArgs: -v alcid=12 watchdog=0 agdpmod=pikera Note: I made a request for DSDT patch but got the file via runme app and windows11 with iasl. I haven't received any response yet. Can you tell me what to do step by step? Thank you in advance for your help.

Hello, I installed with Ventura, I used "EFI.Opencore.Desktop.RaptorLake.MOD" and opencore 0.8.5 for efi. I produced a serial for SMBios according to iMac20.1. The system was successfully installed, but it freezes from time to time, does not give an error, only temporarily does not work, then it is fixed. Here are the Hardware I have: CPU: Intel 13600K Cooler: 140mm Liquid Ram: G.Skill 16GB 3600Mhz SSD: Samsung 860 Evo 250GB HDD: Toshiba ABA300V 3TB GRAPHICS: RX 570 4GB MOBO: Msi Pro Z790-A Wifi DDR4 MOBO GRAPHICS: Intel UHD 770 (I'm not using) MOBO Ethernet: Intel i225-V MOBO Wifi/Bluetooth: Intel Wifi 6E AX211 160Mhz MOBO Audio: ALC4080 Monitor: DELL S2721DS (hdmi, have speaker, using hdmi audio) I deleted the system, I will reinstall it, but I could not understand and do this ACPI thing. I would appreciate if you could prepare the ACPI table, and could you please tell me how to setup with acpi? For example, should I install with "SSDT-OLARILA700.aml" that I used ready to start the installation? Or should I install the system with the "DSDT.aml" you will give me? Note: runme.app throws "reset" while running. It reset 2 or 3 times. So I added the iasl acpi table I got via windows11. DSDT.zip Send me Mustafa-iMac.zip