Samuel84

I use SMbios 20,2. Is it cause of that? I see your DSL.aml might be for imac pro. But i need it for 20,2. How do you patch Ethernet to Intel 210 like in the description build? Under Big Sur i can run an Acquantia 107 10gb. Under Monterey i cant bring it to work. For succesful help i will send you money. Best Regards Samuel Hi, Could you send me your EFI? Do you have on board Ethernet working on Monterey 12.5.1? Solved: Bios: vt-d=enabled Opencore: Disableiomapper=false Forceaquantia=true

Hello, What to do that On Board Intel i225 works? I use your DSL.AML. Everything works otherwise

My fault, in nevoursness i forgot to enable thunderbolt. So right now everything is good and running. I would recommend to use seperate ethernet card for correct usage.

So, i just overinstalled on the existing system and it boots again. I did built in the Acquantia Card again with a kernel patch which is needed according other sources. But right now Thunderbolt isnt working anymore. Thunderbolt has worked before. I ran runme again with the DSDT.AML in the EFI. Could you please check Thunderbolt config. If that doesnt work to check Thunderbolt with DSDT.AML in it i could run it again with only Olarilla.SSDT Please find attached the files https://www.transfernow.net/dl/20211225xYwcJiby/pdFFDkLZ

I‘m with you i guess its a kextcache problem. But how could i fix it. My backups are 4month old. So i would rather like to fix it somehow if there is a way…

Any Idea about that? What could i try? thanks for any idea.

How to solve that?

The following happend: yesterday i built in the ASUS XG-C100C 10G. After that i could boot with EFI with DSDT.aml. The Asus Ethernet was recognised out of the box but in EN2. Besides that i have a Fenvie Wifi Bluetooth Card in the system. Then i sudo rm /Library/Preferences/SystemConfiguration/NetworkInterfaces.plist to reset Networkadapter to get EN0 for Ethernet. After reboot i cant boot anymore. I took out both Cards Fenvie and Asus Ethernet and tried to boot with USB Stick witz only ssdt olarilla in it. I tried to disable all Ethernet Kext and boot without, no help. Please see image attached https://www.transfernow.net/dl/20211217xErBfQnZ

I put in a ASUS XG-C100C 10G in this should work out of the box as it has Aquantia Chip which is natively supported. The system doesnt boot anymore with the DSDT.aml in EFI and either without DSDT.aml from USB Stick. https://www31.zippyshare.com/v/s3P7KBcX/file.html Plese help!

Ok, thanks. But how then i should get ethernet to work? I tried with your EFI to add a Kernel Patch and a device propertie according Dortania Comet Lake Guide. But no luck. Please see my EFI https://www25.zippyshare.com/v/gAu5DPpR/file.html i checked your initial build overview. There is indicated on the pictures that you have Intel210 and not 225. did you use other PCI Ethernet Card?

I found a way it works and after resetting with sudo rm /Library/Preferences/SystemConfiguration/NetworkInterfaces.plist it was correct in EN0. You need to include two FakePCIDKext and add some device properties. I attached you the files and the screenshots for future build requests from others. https://www119.zippyshare.com/v/x7J8c4cg/file.html

Thanks. I guess final issue: Ethernet doesnt work. Tried to fix via Device Properties but couldnt resolve. LAN is on in bios. Rest looks good. https://www57.zippyshare.com/v/rDG6ypHK/file.html Screenshot 2021-12-14 at 23.33.11.zip Screenshot 2021-12-14 at 23.35.19.zip

I know how to do it. No problem. thanks mate. Thunderbolt working good. My Audio Interface runs. Sent you 20bugs.

Thanks. What Hardware Acceleration? Primary GPU (RX580) HW Acceleration? I saw for Z490 Vision D you used iMac 20.x. Why its applicable there? Any other Issues with iMac 20.x? I already have lots of software and things prepared and authorized for iMac 20.x. Thats why i'm asking. If its only HW GPU Acceleration i could live without. USB port map with Hackintool i know how to do. I did before. BTW nice music in the background of those vids:)... Best Regards Samuel

Thanks for your message. The first attempt it didn't boot. I cleaned the boot args of the NVRAM like agdpmod=pikera as i do not have a polaris card. I have a RX 580. After that i could finally boot with your EFI. I did change from imacpro to SMBIOS 20,2. I want to use this SMBIOS. Are you able to create the DSDT.aml as well for iMac 20.2? Please find attached the dump with your EFI. https://www51.zippyshare.com/v/u6RDU35D/file.html