hotboi

I’m a bit confused… What would need to change in the bios? I have not altered anything…

Am I unable to use my DSDT.aml for Z590?

I been using the XFX RX580 for almost 2 years with no issues... I can still use it now with no issues if I boot with OC 0.7.2 - 0.8.2 with my custom DSDT.aml that I got from this site. The problem only happens when I update to OC 0.8.3. I don't have a RocketLake, I have a CometLake. If I use SSDT-OLARILA.aml from CometLake EFI MOD folder, OC 0.8.3 will boot my machine. But I want to use my custom DSDT.aml that I got from here for my Z590 Vision D.

Hi, all! I get stuck with this ACPI Error (see pic) after I update to OC 0.8.3. OC 0.8.2 boots just fine. I have tested with Big Sur & Monterey and the same thing happens on both macOSes. System: Z590 Vision D, Core i9 10850K, 64GB Crucial Ballistix 3600, Sabrent 2TB Rocket NVMe, XFX Radeon 580 GTS XXX Edition 8 GB EFI folder: https://tinyurl.com/a6b2wxt4

Can you tell me how to remove _prw inside xhci device? EDIT: Never mind I figured it out. Sleep is working now after I deleted _prw from XHCI. For those in the same situation, you have to download MaciASL and open DSDT.aml file and find _prw in XHCI section and remove code.

Sorry. I need a little more detail. How do I do this and where do I do this?

In my case sleep doesn’t sleep. It starts to sleep then wakes immediately after sleeping and causes error.

Any to get sleep working?

Yes, upon further inspection the culprit is in the Hardware tab. As long as you change the Hardware settings, you can leave IPv4 on DHCP.

Anyway to get wireless working? Also, if using DSDT why do we patch ACPI with RTC_STA? Just trying to learn. And what does NVRAM LegacySchema settings do? And why do we use 7,1 instead of 20,2? Thanks!!

On first shot no wireless or ethernet working. Ethernet get ip from router and dns, but no connection. Browser doesn't load page. Bluetooth connected AirPods, so bluetooth is working. EDIT: Disabled FakePCIID.kext & FakePCIID_Intel_I225-V.kext. Configued IPv4 to Manually and Manually as well under Hardware tab, full-duplex, flow-control, then Internet works.

I downloaded this from HackinDROM tool. Thanks for your help! EFI folder: https://www.dropbox.com/s/pkwjfk0mk1cvimi/EFI.zip?dl=0

What ACPI Quirks do I need? Anything in Booter or Kernel? Also, do I need to delete all other Device Properties since I am using DSDT?

I tried every way that was mentioned in this thread. No dice. Couldn't get it to work no matter what.

Do I need to change device id? or just add kext?

Hi MaLd0n! Thanks for all your guides! I have sent you a donation. Can I please get a patched DSDT? I have tried to do everything to get ethernet (i225-V) working, but it just won't work. It shows connected and I get an ip from my router as well, but there is no internet connection. I need to use ethernet rather than wireless. Thanks for your help! Z590 Vision D Core i9 10850K 64GB Crucial Ballistix 3600 Sabrent 2TB Rocket NVMe macOS 11.5.2 Generated file: https://www.dropbox.com/s/8gjn62k4d886kju/Send me iMac-Pro.zip?dl=0 In case you need it, dGPU XFX Radeon 580 GTS XXX Edition 8 GB