josecarlos2

Enabled vtd and seems to work ok, thanks

Sorryjose’s Mac Pro.ioreg.zip

Thanks Send me joses-Mac-Pro.zip

Thank you very much, but thunderbolt isn't working

Thanks. EFI.zip

Don't know how to do it

first, replaced on efi, sdsdt.aml with ssd.tbh3.aml, and I added entry with open core configurator 2.53.0.0 and saved as 0.7.5 release configuration, then the system locked at boot, afterwards I used both files on refi and updated ithe plist as before, system booted but no thunderbolt

thanks, changed the files on efi and locks at boot

Thank you very much, replaced the dsdt.aml but thunderbolt still not working.

need some help with dsdt, thanks Send me joses-Mac-Pro.zip

thanks, I'll backup everything and I'll try a new installation when I have some time. That's not a hardware problem because on windows those ports work.

did the remap, but I don't know if is ok. when testing usb3, the usb 3 stick was not recognized in some usb3 ports, tried the usb c ports using a usb 3.1 stick with and adapter and the usb stick was not recognized

Thanks a lot, enabled VT-d on BIOS and the antelope interface has been recognized. Didn`t remap USB yet.

Thanks again jose’s Mac Pro.ioreg.zip

Thanks. Send me joses-Mac-Pro.zip

thanks a lot, any advice would be appreciated jose’s Mac Pro.ioreg.zip

Still not working with this EFI on hard drive. Tried with an Antelope Audio discrete 4 audio interface (thunderbolt 2). In Sistem information says that thunderbolt/usb4 drivers are not loaded.

Need some help with my Big Sur installation, used previously posted EFI for systems with similar hardware with no luck. Thunderbolt doesn't work. Asus Proart z490 creator 10G Intel Core i9 10900K 4x16Gb Corsair vengeance dd4 3600 mhz Radeon RX 5700 Xt Big Sur 11.5.1 Send me joses-Mac-Pro.zip