cvalencia

Hi, a thousand apologies for bothering you so much. With the last EFI that you shared with me I was able to do the installation and I am waiting to run the usbmap because some ports do not work. (I haven't had time yet.) But the hibernation is not working, although the OS tries (and it takes a long time), as soon as it enters hibernation, it immediately reactivates. I really appreciate your help.

Hi, To run the process ... do I need to modify anything in the OC you sent me?

Hi, this one worked perfect for me! Should I add some Kexts to make the USBMAP?

Hi, I agree with you. What has me puzzled and with my little knowledge of OC I have not been able to identify, is that I think that if it was something in my BIOS setup (please correct me if I'm wrong) this EFI (https://github.com/SchmockLord/Gigabyte-Z590i-Vision-D-11900k) would also have to get that error. But with that EFI even though it is for another mobo and it is not well built (you told me before), that boot without error and allows me to do the Big Sur installation without any problem; obviously, when finished, some components of my hardware don't work (some USB ports, Ethernet ...). Please help me to identify (I don't know if based on that EFI) what I might need to use your well created EFI/DSDT. Thank you very much for all your help. What other information or screenshots should I send you to please help me?

Hi, I am trying to do a fresh install using the EFi you shared with me (to see where it sticks I modified the boot-arg), but it gets stuck almost in the same part as the EFI 500 Series: https://prnt.sc/1qrsi8e

Thank you!

Hi, I attach the new RunMe result TKS Send me Cesar-Mac-Pro.zip

Hi, this is my hardware: MOBO: Gigabyte Z590M Gaming X PROC: Intel Core i9-10900KF RAM: Patriot Viper 4 Blackout Series DDR4 3200 MHz Video: MSI Radeon RX 580 8GB STORAGE: Sabrent 1TB Rocket NVMe WiFi and Bluetooth: YOUBO Dual Band WiFi Card BCM94360CD I plan to install an Thunderbolt 4 card (Gigabyte GC-Maple Ridge - Intel JHL8540), but have not yet purchased it. In order to install macOS Big Sur, I had to use an EFI that I found on github, because with your EFI (the generic one for the 500 series) something prevents the system from booting and it stays on "SMCSuper IO ssio: @ failed to detect supported Super IO chip": https://prnt.sc/1qnfk08 For some reason the "runme.zip" is 11MB and the web site only allows me to upload 9.7MB. So I share it with you through this website (it expires in a week automatically): https://we.tl/t-reKKivNjyF Thanks

I have a Gigabyte Z590M Gaming X. Can you share the optimized EFI referenced in the post?

Hi, The EFI folder is generic? can you share the MOBO specific one?

I found the reason why the USB ports do not give me higher speeds: the Intel® B460 chipset does not exceed 5Gbps and mathematically "speaking" 5 Gbps is 625 MB/s. Tks for your help PS I am going (LoL) for a MOBO that has a 10 Gbps USB chipset.

Hi, I have followed the whole process step by step (even several times) but the USB 3.x ports do not go over 430 MB/s. PS In the USB Remap video, I didn't understand about the iPhone, can you please explain it to me?

I have already done the processor. thank you very much. does it affect anything if it is a Xeon or an i9? DRM, Apple TV ... PS I'm going to do the step by step of the USB Remap.

my bad I thought the EFi had everything. Thank you. PS Doesn't it matter that in about this Mac it says I have a 10 core Xeon W and not an i9-10900(kf)?

Thank you! I just tried it. I have some questions 1. ) Doesn't it matter that in about this Mac it says I have a 10 core Xeon W and not an i9-10900(kf)? 2.) With the generic EFI (EFI OpenCore 300.400 Series) iStat Menus was showing me many more temperature sensors, including all the MOBO fans. Now it only shows me the following: https://prnt.sc/1dciwju Hi, I just encountered a more delicate problem: USB ports (even USB-C) only run at 440MB/s (I tested them all with a USB-C NVMe drive with which at least I get performance of 930 MB/s on 3 and more than 2 GB on 3.2 https://prnt.sc/1dd7haa Tks

Hello, I attach the new sendme created with the OC you indicated. (without changing anything and running reset nvram first) Thank you Send me iMac-de-Cesar.zip

Hi, I have been using Clover because I feel a bit more comfortable with it (since I have been using it for several years), but if the best OpenCore I have no problem to "migrate". I am open to your recommendations for the best option for my setup.

Hello, please help me with the DSDTs and recommend specific configurations in Clover. MOBO: MSI MAG B460M (https://www.msi.com/Motherboard/MAG-B460M-MORTAR) CPU: Intel® Core™ i9-10900KF (no iGPU) dGPU: MSI Radeon RX 580 8GB Storage: NVMe Sabrent 1TB Rocket WiFi + BT: YOUBO Dual Band WiFi Card BCM94360CD Clover: r5138 Send me iMac-de-Cesar.zip

any recommendation for that model?The rest of the hardware is the same (Rx580, I9-1090kf...).

Hi, thanks for your help. Definitely something is wrong with that combination of processor and mobo and also between my work and testing settings and reboot, settings and reboot, settings and reboot, settings and reboot ... I'm getting frustrated I'm going to change the mobo for a GIGABYTE Z490M Gaming X. I hope to have better luck. any recommendation for that model? PS In my current setup (Z170i + Core i5-6600) I use since "always" Clover, because it worked much better than OpenCore. What do you think about Clover for new setups?

Hi, thanks for the reply. The intel F series processors do not include iGPU. I'm using a (MSI) Radeon RX580 8GB

Hello everyone, i need help installing MacOS Big Sur on my new Mobo Gigabyte B560M with an Intel Core i9-10900KF processor and (MSI) Radeon RX 580 8GB video card. I have tried for days to start the installer (with OC & Clover) and all the help I could read, but I have not been able to make a functional installation (that at least loads the desktop). The furthest I got was to start the graphical installation (with a couple of reboots) using Olarila BigSur 11.4.raw. But I still haven't been able to get it to work.