lorenzolamasse

Hey Maldon and team ! Here is the link for my Z390 UD / 8700K / Radeon RX460 runme output, can you send the patched DSDT back ? Main issue so far is lagging UI, mainly window rescaling. Thanks ! https://www.transfernow.net/dl/20220421nn4KVqJg/v3atjy8w

Anyone ? Can't boot anymore, at all no matter what now. Can't boot, even from the Olarila install USB ? Always get the kexts stall message ???

Still no better, every second boot I'm stuck at gioscreenlockstate 3, and whenever I pass that step, system freezes after a while, no matter what I do... Any clue ?

Actually I've added this evening the recommended inserts for my platform (using tonymacs fb patching guide): <key>PciRoot(0x0)/Pci(0x2,0x0)</key> <dict> <key>AAPL,ig-platform-id</key> <data> BwCbPg== </data> <key>device-id</key> <data> mz4AAA== </data> <key>enable-hdmi20</key> <data> AQAAAA== </data> <key>framebuffer-con0-busid</key> <data> AAAAAA== </data> <key>framebuffer-con0-enable</key> <data> AQAAAA== </data> <key>framebuffer-con0-flags</key> <data> IAAAAA== </data> <key>framebuffer-con0-index</key> <data> AAAAAA== </data> <key>framebuffer-con0-pipe</key> <data> AAAAAA== </data> <key>framebuffer-con0-type</key> <data> AgAAAA== </data> <key>framebuffer-con1-busid</key> <data> BQAAAA== </data> <key>framebuffer-con1-enable</key> <data> AQAAAA== </data> <key>framebuffer-con1-index</key> <data> AQAAAA== </data> <key>framebuffer-con1-pipe</key> <data> EgAAAA== </data> <key>framebuffer-con1-type</key> <data> AAgAAA== </data> <key>framebuffer-con2-busid</key> <data> BAAAAA== </data> <key>framebuffer-con2-enable</key> <data> AQAAAA== </data> <key>framebuffer-con2-index</key> <data> AgAAAA== </data> <key>framebuffer-con2-pipe</key> <data> EgAAAA== </data> <key>framebuffer-con2-type</key> <data> AAgAAA== </data> <key>framebuffer-con3-busid</key> <data> BgAAAA== </data> <key>framebuffer-con3-enable</key> <data> AQAAAA== </data> <key>framebuffer-con3-flags</key> <data> xwMAAA== </data> <key>framebuffer-con3-index</key> <data> AwAAAA== </data> <key>framebuffer-con3-pipe</key> <data> EgAAAA== </data> <key>framebuffer-con3-type</key> <data> AAQAAA== </data> <key>framebuffer-patch-enable</key> <data> AQAAAA== </data> <key>framebuffer-portcount</key> <data> BAAAAA== </data> <key>framebuffer-unifiedmem</key> <data> AAAAgA== </data> </dict> Especially including <key>enable-hdmi20</key> that is equivalent to -cdfon from what it seems... I manage to boot from time to time (but totally randomly, needing to force power off several times): - the system boots in 60Hz, but screen is flickering and speakers are glitching - If I turn off the screen and wait for a few hours, when I turn it back on it syncs in 24Hz, and if I try to force it to a higher freq with RDM it hangs... I've tested connecting a 1080p screen to the other HDMI, does not change anything whatsoever. Should I try and increase DVMT alloc mem in the BIOS (it was at 64MB, I've increased to 128MB, but iI can go higher, up to 512MB I think) ? I have another 4k screen, I might check with this one and see if it changes anything. My point is I really need the 60Hz, as in 24Hz for my use (Digital Audio Workstation) it's too laggy... Thanks for your help, let me know if there is anything else I shouls try

Hey Maldon, I was running pretty stable on this config, until lately I tried to connect an external 4K dipslay @60Hz, now the system only boot once every 30 times or so and even then the screen flickers often even seeming to have power issues (the same screen working perfectly on other computers), it usually get stuck at some kextd stall or gioscreenlockstate before having a chance of going to the desktop (ending up with black screens). I have switched to open core as attempt to follow latest guides (especially with weg framebuffer patching), but it does not change anything. I tried extracting that screen EDID from Linux and forcing it as well in case it was some issue with it. I sometimes also get considerrebuild messages for kexts, here is my runme, could you have a lok at it and see if I'm missing something (or if I have some duplicate stuff). Config is: - i7 8700 (UHD 630) - Gigabyte Z370N Wifi - 1xHDMI + 1xHDMI 2.0 + 1 DP - SSD (Sata) https://we.tl/t-AqIHGIigKL (can't embed the sendme, it's too big) Thanks !

Have tried that, network adapter is seen (same as with stock kext of the image), but cable is said to be disconnectd (same machine finds network properly under a Live Ubuntu so I'm sure there is no cable issue there). No display whatsoever, I have tried various connectors configs and NVRAM options, display wont turn on after initial boot. Shall I post output of runme here ? No audio device at all (but I'm still booting on the install usb) Thank you,

OK, install done, moving on to the next step (for now no Ethernet at start)... Thanks !

That's under Clover, from your latest image (unless I got it wrong and there has been an Opencore one released since ?)

Sorry Maldon, not clear what you're asking, haha, I'm less fluent than you at all the terms

Hello, Just trying to boot latest Mojave image on a 8565U shoebox, but fail at loading com.insanelymac.RealtekRTL8111 with error (0xdc000016), any clue ? Thanks ! 2020-08-19 10.37.13.jpg.zip

Dear all, Here is my Catalina runme for that config: 8250U / 256GB SSD / 8GB RAM (NUC style unit) Thanks for your help... Send me iMac-de-yoto.intranet.evitech.zip

Dear Maldon, No better luck with Catalina, I managed to finish install even though sometimes it does not boot at all, but at login, as soon I type in my password and press enter the system reboots as if I had askded for shutdown, this is weird indeed...

Now I've updated BIOS to latest version, no change alas, nothing happens forever latest message about AppleGraphicsDevicePolicy exiting with code 1 (just a warning though)... Any link to an issue with Iris graphics driver ?

Dear Maldon, that's why I've done first (upgrading Clover), after searching on the forum for previous occurrences of the problem, but to no avail. Not sure if I should try and change Cover options though (and which ones), or find out offending/missing kexts :/ Lorenzo

Dear Maldon, I have downloaded a fresh copy of the image (Mojave), I'm stuck when booting installer on ACPICPU being stalled, no matter what config.plist I choose, here is the config I'm trying to install: Laptop DELL XPS 13 9350 / CPU Skylake-U 6560U / Iris 540 / NVME Toshiba 512GB Any clue ? Thanks !

Thanks, no real change, now stuck at bpfAttach messages...

Dears, I seem to be stuck after installation, when trying to boot it stops somewhere at network start, last message is about en0 and Airport_BCRMNIC_P2PInterface, with no clear error message, and nothing after that.. That's a Skylake-U Laptop (Dell XPS 13 9350) Can you help ? Send me MBP-de-yoto.intranet.evitech.zip

Working fine now, thanks ! At some point I'll have to be able to do it myseldf, as I'll be setting u another machine in the coming days I've been through the links you rovide and the serach engine too, but to no avail, so I wonder what was causing this freeze

Hi there, Just installed a fresh Mojave on my setup, but the system won't turn off until I hit the power button, and I have a message at startup then telling me I have rebooted manually... That's not my first hackintosh, but this is the first time I get that. I have been through all recommendations wrt BIOS settings and updates, with no luck. Any help appreciated Lorenzo Send me iMac-de-yoto.intranet.evitech.zip

Dear all, Just finished clean install of High Sierra on my GA-H110M-S2PV 1.0 mobo (Inte Core i7 6700) / NVIDIA GeForce GT 730 2047 Mo. Network and graphics work OK, but no sound device detected, can you help ? Here is the link to the Runme output: http://dl.free.fr/iMtekorzg Thanks !