Hi guys !
I'm writing in hope, that somebody can help me with my problem.
1.My problem is that hack goes to sleep ok, but it does not wake up from sleep (i think cpu halted). I tried different usb ports, and wake up from power button, but always is the same.
2.Next problem is that when OS X is booting all fans in case stop (look like something cuts their voltage every second, because is seen in fan led that voltage is lowered in steps, until they stop because voltage is too low). So temperatures are very dangerously high when hack is under load. Tried bios setting (AI quiet on, off -manual fan control (silent, optimised, performance) NO difference.
(Audio not working in all methods, reset and shutdown works in all methods ootb)
Firstly I tried booting it from unibest usb without any files loaded on system (vanilla), and graphic card, ethernet, wireless, bluetooth all that works ootb, also my ram and cpu are recognised correctly, even I have 3 steps in cpu frequency (c states), usb ports are tricky (sometimes they work) and disks are orange (as external) AND problems mentioned in first two paragraphs remain.
Next I made clean reinstall, installed clover boot loader (my favourite) and a custom dsdt-( patched it with some old patches pack for its motherboard (p5w dh deluxe), and fixed all errors, but some warning and optimisations remained. USB problems were gone and AHCI drives were recognised as internal, BUT first two problems remained.
Then I tried some different user dsdts from other builds around the interwebz but same motherboard (no fix for first two problems) (not good idea I know )
Next i used my other dsdt, from mavericks. In 10.9 there were no problems everything was working, but they changed something in 10.10 AND first two problems remained.
Currently I'm running hack (again clean) with easy mode (all those cpu management kexts loaded) and first two problems remain.
I've read allot about dsdt editing, but all those guides are based on newer builds, or are made for easy applying (.txt patches from repos), and i could not find the any in deep guide (what is what, what to write, what to delete, replace...) to make user dsdt from scratch (no those .txt patches), also I'm not a programer so all those lines of code make me crazy, and i could not fix anything.
So if somebody is wiling to help here i've attached linux oem dsdt, Io registry dump, boot log.
THANK YOU
SPECS:
Intel c2d e8400 (3.0mhz)
ram 6gb 800mhz
gpu Ati 4870 512vram (works ootb,)
Audio ALC 882 (not working)
Marvell Yukon ethernet (works ootb)
Broadcom Apple wifi bluetooth (works ootb)
Realtek motherboard buildin Wifi ( not working no problem because i don't use it)
Motherboard ASUS p5w dh deluxe 3002 stock bios
(bios setting from this guide " http://hamac.pl/topi...arda-od-a-do-z/ ")
All sata is connected on Intel ahci
piromanneo.zip
