doze

Hi ! I try all the tips you notice in your Post, but nothing works. The vConfig.Plist need surely More tweak to boot Osx Properly. i'm using the 3253 revision of CLover bootloader, with DSDT auto-patching, etc.... it seems to be not easy, see here : http://www.insanelymac.com/forum/topic/293894-ati-mobility-radeon-hd4570-clover-doesnt-work-properly/ And i see your post too : http://Olarila.com/forum/viewtopic.php?f=18&t=736 Do you have more suggestion ? Regards.

Hi, this is the raw and 100% error and warning free. Made with the latest bios available (original, no mod) i7 Q720, Radeon HD4570, ALC272, Chipset 6 series, 1920x1080. Need to be patched. Actually , with the latest Clover revision, the boot hang at the Apple sign with the progressbar (spinning wheel) It seems the 4570 not work properly. Criticism and help are Welcome. Regards. DSDTW760&M770CU.rar

Here's the DSDT of this laptop (with the latest bios available) i7 4800QM (HD4600), mSata 240GB, 1TB HDD, GTX860m 2GB, 0 error, 0 Warning, 0 remark with MAciaSL (ACPI 4.0) 0 error, 0 Warning, 1 remark with DSDTEditor I hope my work is 100% ok, but i want to submit here to have the "agreement" of DSDT GuRu And if people need it, eheh ! Need to be patched ,but i want to be sure it was perfectly cleaned before. The rar file : 2 .dsl, RAWDSDT and the "clean" one. Criticism are welcome , of course ! DSDTW370ss.rar

No pain, No gain.... here's RAW DSDT.dsl : 0 Errors, 0 warnings, 0 remarks, 2727 Optimizations Ready to be patched DSDTRawPerfect.rar

Hi. Which patch i need to apply to DSDT ? The UX31E configuration : Core i7-2677M InTeL HD 3000 intel QS67 chipset (Intel Cougar Point-M PCH :SATA AHCI 6 Port, USB EHCI) Realtek ALC269 Atheros AR9485WB-EG Fresco Logic xHCI USB3 controller

Yes i know, sorry for the word "error" i'll be more precise and use "warning" next time. But i want to learn to make it 100% "error" or "warning" Free.

Thanks ! if i compil your own i have 1 error : 4102 Warning _REG has no corresponding Operation Region Device (IDE0) { Name (_ADR, 0x001F0002) Name (REGF, 0x01) Method (_REG, 2, NotSerialized) { If (LEqual (Arg0, 0x02)) { Store (Arg1, REGF) } } I know i need to patch it , but if it could be clean Before ) Best Regards !

Hi Thanks for the Info , try your mod,it's ok, but again 3 errors : 17999 Error syntax error, unexpected PARSEOP_IF 18009 Error syntax error, unexpected PARSEOP_IF 18041 Error syntax error, unexpected $end and premature End-Of-File for the 2 first : Name (\_S0, Package (0x04) { 0x00, 0x00, 0x00, 0x00 }) If (SS3) <===== Here { Name (\_S3, Package (0x04) { 0x05, 0x00, 0x00, 0x00 }) } If (SS4) <===== Here { Name (\_S4, Package (0x04) { 18041 Error syntax error, unexpected $end and premature End-Of-File : Method (WAK, 1, NotSerialized) { \_SB.ATKD.GENW (Arg0) \_SB.PCI0.GFX0.OWAK (Arg0) \OEMW (Arg0) } } And if i save it, i can't re-open it correctly because i have this error : "Pairs of bracket don't match, tree not updated".

Hi. I try to fix DSDT Error for Asus UX31E Bios 214, do some works but 3 error are difficult for me (and i need some help to mod) i need to clean before applying patch (need some help too) : 1) 4102 Warning _REG has no corresponding Operation Region 2a) 7312 Warning Not all control paths return a value (_CRS) 2b) 7312 Warning Reserved method must return a value (Buffer required for _CRS) 4102 Warning _REG has no corresponding Operation Region : Device (IDE0) { Name (_ADR, 0x001F0002) Name (REGF, 0x01) Method (_REG, 2, NotSerialized) { If (LEqual (Arg0, 0x02)) { Store (Arg1, REGF) } } 7312 Warning Not all control paths return a value (_CRS) 7312 Warning Reserved method must return a value (Buffer required for _CRS) Device (\_SB.MEM2) { Name (_HID, EisaId ("PNP0C01")) Name (_UID, 0x02) Name (CRS, ResourceTemplate () { Memory32Fixed (ReadWrite, 0x20000000, // Address Base 0x00200000, // Address Length ) Memory32Fixed (ReadWrite, 0x40000000, // Address Base 0x00200000, // Address Length ) }) Method (_CRS, 0, NotSerialized) { If (IGDS) { Return (CRS) } } } } I know how to correct this one, like this : Method (_CRS, 0, NotSerialized) { If (IGDS) { Return (CRS) } Return (Buffer (One) { 0x00 }) } } } } But when i do this, i obtain 176 errors (!) after compilation, like this : 1895 Error Object does not exist (PICM) 3945 Error Object does not exist (\_SB.SYNA) 6506 Error Object does not exist (\_SB.PCI0.SBRG.EC0.PWAC) 7944 Error Not a control method, cannot invoke (AR06 is a Package) 7951 Error syntax error, unexpected PARSEOP_MUTEX, expecting $end etc.... Thanx for those want to check my work ! Asus UX31E.rar

Posted: 14 Nov 2011, 03:43 : "The other problem : 2 GTX560Ti" Two of them i suppose ?

The 4 PCI-express connector : Device (P0P1) { Name (_ADR, 0x00010000) Method (_PRW, 0, NotSerialized) { Return (GPRW (0x09, 0x04)) } Method (_PRT, 0, NotSerialized) { If (PICM) { Return (AR01) } Return (PR01) } } Device (P0P2) { Name (_ADR, 0x00010001) Method (_PRW, 0, NotSerialized) { Return (GPRW (0x09, 0x04)) } Method (_PRT, 0, NotSerialized) { If (PICM) { Return (AR02) } Return (PR02) } } Device (P0P3) { Name (_ADR, 0x00010002) Method (_PRW, 0, NotSerialized) { Return (GPRW (0x09, 0x04)) } Method (_PRT, 0, NotSerialized) { If (PICM) { Return (AR03) } Return (PR03) } } Device (P0P4) { Name (_ADR, 0x00060000) Method (_PRW, 0, NotSerialized) { Return (GPRW (0x09, 0x04)) } Method (_PRT, 0, NotSerialized) { If (PICM) { Return (AR04) } Return (PR04) } } }

the problem is not inserting, it's more: How to insert : Properly (i think i forget to precise : "properly", sorry) in my DSDT. i've seen your topic before i asked my question, like i said before, i don't have your skill and knowledge. This is why i ask about that, because my DSDT don't have the same structure, it's similar , of course. The problem is my DSDT contain some section concerning GFX, because the mobo have integrated video Port, using the sandybridge possibility. The problem is: Which section i must modify to obtain the correct result ? i think this one is for IGP : Device (GFX0) { Name (_ADR, 0x00020000) Name (OPBS, 0xFFFFFF00) Method (OPBA, 0, NotSerialized) { Store (ASLS, Local0) If (LEqual (Local0, 0xFFFFFFFF)) { Store (0xFF000000, Local0) } Return (Local0) } Scope (^^PCI0) { OperationRegion (MCHP, PCI_Config, 0x40, 0xC0) Field (MCHP, AnyAcc, NoLock, Preserve) { Offset (0x60), TASM, 10, Offset (0x62) } } OperationRegion (IGDP, PCI_Config, 0x40, 0xC0) Field (IGDP, AnyAcc, NoLock, Preserve) { Offset (0x12), , 1, GIVD, 1, , 2, GUMA, 3, Offset (0x14), , 4, GMFN, 1, Offset (0x18), Offset (0x8C), CDCT, 10, Offset (0x8E), Offset (0xA8), GSSE, 1, GSSB, 14, GSES, 1, Offset (0xBC), ASLS, 32 } Name (M512, 0x08) Name (M1GB, 0x10) OperationRegion (IGDM, SystemMemory, OPBA (), 0x2000) Field (IGDM, AnyAcc, NoLock, Preserve) { SIGN, 128, SIZE, 32, OVER, 32, SVER, 256, VVER, 128, GVER, 128, MBOX, 32, Offset (0xE0), KSV0, 32, KSV1, 8, Offset (0xF0), IBTT, 8, IPSC, 8, IPAT, 8, IBIA, 8, But i'm not sure.... I want to learn, i don't ask to you to do the work but just indicate me How, and Which section i must modify to obtain a correct DSDT.

Need Aptio Bios tools because your bios is an EFI one.It's risky, Bad modding = Blackscreen... Very high skills in assembly language is highly recommended, it's not an easy job.... But if you have sufficient knowledge it's very interesting to learn how to mod it For sure, the motherboard maker have it, The Aptio tools are not Free, very expensive tools, you can search over the web, perhaps chinese or Russian site have some tools. The only leaked tools i know for the moment are here : http://forums.mydigitallife.info/threads/529-Bios-Tools/page27

The other problem : 2 GTX560Ti, used in SLi in Seven. For Osx, i try the GFX string edited with Plist editor,etc.... With one Card, no problem, all is ok, i can obtain QE/CI,CUDA, 1920x1080,etc... with Gfx string. I'm trying to do this with a modded in.plist for two cards, it works partially, and the most annoying thing, only have low resolution. You need to modify the NVDAGF100Hal.kext with the correct Id. And unfortunaltely if you want the correct resolution,you must apply GraphicsEnabler, but you have a beautiful hang on the apple screen just after the "DSMOS has arrived". There's a solution, modifying the DSDT like this : (taken from DSDT.aml, see infidelcompany post 247&248 here : http://www.insanelymac.com/forum/index.php?showtopic=260074&st=240) Device (PEG3) { Name (_ADR, 0x00030000) Device (GFX3) { Name (_ADR, Zero) Method (_DSM, 4, NotSerialized) { Store (Package (0x20) { "AAPL,slot-name", Buffer (0x0A) { "PCI-E 16x" }, "@0,compatible", Buffer (0x0B) { "NVDA,NVMac" }, "@0,device_type", Buffer (0x08) { "display" }, "@0,name", Buffer (0x0F) { "NVDA,Display-A" }, "@1,compatible", Buffer (0x0B) { "NVDA,NVMac" }, "@1,device_type", Buffer (0x08) { "display" }, "@1,name", Buffer (0x0F) { "NVDA,Display-B" }, "NVPM", Buffer (0x1C) { /* 0000 */ 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 0008 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 0010 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 0018 */ 0x00, 0x00, 0x00, 0x00 }, "NVCAP", Buffer (0x18) { /* 0000 */ 0x04, 0x00, 0x00, 0x00, 0x00, 0x00, 0x03, 0x00, /* 0008 */ 0x1C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x0A, /* 0010 */ 0x00, 0x00, 0x00, 0x00 }, "VRAM,totalsize", Buffer (0x04) { 0x00, 0x00, 0x00, 0x80 }, "device_type", Buffer (0x0D) { "NVDA,GeForce" }, "model", Buffer (0x1A) { "NVIDIA GeForce GTX 560 Ti" }, "rom-revision", Buffer (0x0F) { "70.24.11.00.G0" }, "@0,connector-type", Buffer (0x04) { 0x00, 0x08, 0x00, 0x00 }, "@1,connector-type", Buffer (0x04) { 0x00, 0x08, 0x00, 0x00 }, "hda-gfx", Buffer (0x0A) { "onboard-1" } }, Local0) DTGP (Arg0, Arg1, Arg2, Arg3, RefOf (Local0)) Return (Local0) } } But, hehe, i don't have your skill and knowledge in DSDT editing. Can you help me to integer this in Z68 fatality DSDT please ?

Mhhh no, just need to inject the 3rd part sata controler kext, for ASmedia controller. in fact, i have RAID0 & RAID5 on Z68 ich, my hard disk for osx and CD-ROM on the ASMEDIA controller.