George1203

Please help me to patch the DSDT DSDT.aml.zip

It seems like that the Image HardDrive.icns 500X500 can't be accepted by the OpenCanopy.efi.(256X256) My personal GUI image Selector.icns 170X80 can't be accepted by the OpenCanopy.efi.(80X80) OpenCanopy.efi seems check the icns resolution more strictly since the version of 0.71

Download your Opencore EFI for Serie 300 no GUI interface and no boot item for Windows https://www.olarila.com/files/Folders/EFI OpenCore Serie 300.400.zip 2021-07-01 2021-07-07 180218.rar My PC configuration as below: Asus TUF B360M-PLUS GAMING S + INTEL i5-9400F + Radeon RX 570 4 GB + NVMExpress ADATA SX8200PNP for WIN10 + Seagate FireCuda 510 for MacOS

By the way, your config.plist for 0.7 seems some items that doesn't same as the 0.7 sample.plist for example the OpenCore 0.7.0 supported Replaced AdviseWindows with AdviseFeatures in PlatformInfo -> Generic properties

OpenCore 0.69 bootloader with Win10 + Big Sur using dual-disc and dual-system are no problem. Update OpenCored 0.7 and start to appear win10 display blinitializelibrary failed 0xc0000001. This error condition occurs when the EFI content (such as the GUI picture) is modified from Big Sur, and then after restarting into the OpenCore boot selected Win10. This problem can only be solved by disassembling and unplugging the CMOS battery or using OpenCore tools CleanNVRAM and Reset System. My Win10 was reinstalled at the beginning of the month. Trying to directly select Win10 in BIOS not work, still the error of blinitializelibrary failed 0xc0000001. The EFI folder was download form your website with 300 series.

Yes, the 4k display is steel the primary screen after login.

How to define a specific display as the log-in screen in Dual screen mode ? RX570 Graphics card with HDMI or DVI interface connected to 1080P Display. And RX570 DisplayPort connected to 4k Display has been set as the primary screen. Turn-on PC the OC UI interface is on 4k Display and booting is also on 4k Display. Windows login screen in on 4k Display But the login screen of macOS Big Sur is on the 1080P Display How to set the macOS Big Sur login screen on a 4k Display. I have tried to use the converter of DP-to-DVI between the Graphics card to 1080P Display, this made matter worse sometimes the 4k Display cannot get the signal. dualscreen.zip

I have tried to use the EFI as your download folder but it was the same problem. I have tried to use the EFI as your download folder but it was the same problem.

Using the ver0.68 OC EFI for Big Sur HDMI interface with 4k display get the black screen after wake OC ver0.68 with 1920*1080 LCD screen(another ASUS monitor) the screen can work well after wake After changing to a 4k screen, the host seems like be waked-up, but the screen shows no HDMI input signal(The screen is ASUS TUF GAMING VG289Q) My PC configuration as below: Asus TUF B360M-PLUS GAMING S + INTEL i5-9400F + Radeon RX 570 4 GB + NVMExpress ADATA SX8200PNP for WIN10 + Seagate FireCuda 510 for MacOS

Asus TUF B360M-PLUS GAMING S + INTEL i5-9400F + Radeon RX 570 4 GB + NVMExpress ADATA SX8200PNP for WIN10 + Seagate FireCuda 510 for MacOS

Clover bootloader r5123 with Win10 + Catalina is normal when using dual-disc and dual-system Upgrade to Big Sur with the Clover bootloader r5128 starts to appear in win10. Sometimes it will display blinitializelibrary failed 0xc0000001. This situation usually appears when you restart from Big Sur and choose Win10. The solution at that time is to restart the PC and choose Big Sur again. Restart, at this time the bootloader selects Win10 to start normally But after updating to r5131, win10 shows blinitializelibrary failed 0xc0000001 becomes frequent, and it seems that the CMOS battery can only be disassembled and unplugged I have tried to use the tools CleanNVRAM and ResetNVRAM booted via USB OpenCore, but they may not solve this problem I have installed another hard disk with Clover bootloader r5123 with Catalina. When I encounter win10, it shows blinitializelibrary failed 0xc000000, enter the BIOS and select Catalina, then restart and select Win10 in Clover bootloader r5123 Ask if there is a way to solve this dilemma

I download the Clover EFI folder of Series 300 400 and the file date was 2021/2/27. Without any change and mount the EFI on the partition of macOS Big Sur ver 11.2.1, but the bootloader can list all the partitions exception the partition of macOS Big Sur. The listing include Windows 10 , Big Sur Preboot Without any change the EFIs with Clover Bootloader r5127 5128 & r5129 are no problem to boot the macOS Big Sur ver 11.2.1. Asus TUF B360M-PLUS GAMING S + INTEL i5-9400F + Radeon RX 570 4 GB + NVMExpress ADATA SX8200PNP for WIN10 + Seagate FireCuda 510 for MacOS What should I do any modify for the Clover EFI folder of Series 300 400 ?