Sparkesy02

hi sorry for the late reply but I've been busy with work the last few weeks. the processor is an intel i5 1035g1 an am using an efi you provided me previously.

hi all just wondering if anyone is able to shine a light on some issues i am having, first off i managed to get the audio working on my Lenovo idea-pad 5i and everything shows as should except when i select the internal mic it doesn't work yet it works in windows also when i connect headphones into the jack they also work with mic, i also then have an issue with the display where when i boot the system despite being at full brightness and having brightness control the screen is dim this is rectified by putting the system to sleep then immediately waking it resulting in the display going to peak brightness i think it has something to do with the far from perfect way of getting intel uhd g1 working on a hack, my HDMI also does not work but that may be down to the Nvidia discrete graphics, the final issue i am having is with the battery of which i am sure is not being managed properly as it runs down far too quickly and only lasts for about 2 hours where windows will last for about 7-8 as it should. any help is much appreciated as these problems have been plaguing me for a while now.

Just tried it and it didn’t work but after replacing the FireWire card with another I had its now fully working in Mac and windows

Ok I’ll check it now, I was going to remove the FireWire card anyway as my iSight camera no longer works under big sur

here you go https://drive.google.com/file/d/1P_v23hvd1x92ZhfVJ4I3i4JMTQPoBXbv/view?usp=sharing

it was too big to upload here so I had to put it on GDrive https://drive.google.com/file/d/1dMAsaXFd_U0v1ufqYwEpICue-kxD6LCn/view?usp=sharing

Core i5 10400F Gigabyte b460m d3h board 8GB ram 1tb NVME ssd gt710 2gb Kepler version it’s the same issue my old system had and only started happening after I installed windows

Hi all just wondering if anyone knew how I could sort an issue I’m having with my hack/PC and shutting down basically after I shut down in either Mac or windows it shuts down fine then 5 seconds after full shutdown starts back up yet on my manjaro install it doesn’t do this and it was also working properly in Mac before but since adding windows to the equation this happens and everything is the same bios wise as before any help would be much appreciated

nvram didn't work i'll give an older version of whatevergreen a go just tried your suggestions still nothing also wondering would there be any chance of getting my HDMI out working or would it possibly not because of my Nvidia descrete graphics

just given it a go but the problem is still there where i can only get my displays full brightness after putting it into sleep and wakeing it sraight

hopefully this works last link wouldn't show https://drive.google.com/file/d/151t_q3znPUrot3c_DK2XyTgiALKljZU7/view?usp=sharing

ok i'll do it now here you go sorry again i couldn't upload it so heres a drive link https://drive.google.com/file/d/151t_q3znPUrot3c_DK2XyTgiALKljZU7/view?usp=sharing

i know it's a bit all over the place from when i was trying to get my trackpad working ?

I've done dump but it won't let me send it as it's over the max file size here's a google drive link if it helps https://drive.google.com/file/d/1XkPVOAlq61Nmc3OIeup7ouAEnmo2Hu9O/view?usp=sharing

intel core i5 1035g1