csuporzoltan1

I found the solution: alcdelay. I used alcdelay=500 boot args, and now works 100% of the time.

Thanks. The problem was that WEG could not disable my Nvidia card, and the card was sucking a lot of power. I disabled it in BIOS, and the fan speed is now normal.

Hi! I'm having issues with my Lenovo 700-15ISK. My laptop's Fan Speed is relatively high besides my processor temp is at 42-45C. I'm using VirtualSMC and the temps are recognized, but the Fan Speeds are not (I can't change it or see it) Is there a solution for it? Here's the SendMe.app output (with your DSDT.AML that I'm using): http://s000.tinyupload.com/?file_id=78714931771370137444 On Windows, the fans are way less loud. Power Management is OK on Mac, the processor can scale down to 700MHz and can go to 3.5GHz. Thanks a lot in advance!!!!

Thanks, but seems like it did not solved the problem. I tried rebooting 15 times in the last 3-4 hours, and in 1 case the sound was dead also... Do you have any other tips?

Hello! I've been trying to use my hackintosh, but I keep getting annoyed by a thing: 2 of 10 times (rare, but annoying) when I restart my computer, the sound refuses to work... It's like not properly patched, or something. When I restart the computer without doing anything, the sound does work flawlessly... after 5-6-7 restarts, the sound refuses to work until I restart it again... I'll attach 2 Send_Me folders. One is a working sound copy, and one when the sound is not working. I'm using ALCPlugFix to make my headphone jack work properly. https://drive.google.com/open?id=1hOCJgjMn9V-AgW5UFHM0WZmR7ilqOGVG Thanks in advance!!

****** FIXED ****** I’m not going to delete the topic because if anyone has the same problem: I got it fixed by updating the clover’s EFI file to the attached ones. Both the boot x64 and clover.efi Thanks a lot anyways!! EFI-FIX.zip

Hello everyone! I wrote a lot of thing, however this seems a bit off... Yesterday the 10.15.4 update came out, and I was trying to update to it, but i'm stuck at this stage: https://drive.google.com/open?id=1pmPuL5vORWSR89d9baqslhbKsOklSf2Q I know it must be a Memory problem, but the regular 10.15.3 setup (without the update) works fine... I'm writing from it. I'm using FileVault 2, never had a problem with it, so it must not be a problem. I tried replacing QcQuircks with the usual OSxAptiodrivers, 2,3, still the same. What problem do I have? I attached the sendme.app output: https://drive.google.com/open?id=1hvbMoUnlq5C67lu_KiLdRWMq84o6sSic Do I have a problem, or should I wait for some .efi updates? Thanks a lot!

Hey! While I was tinkering, I found the solution. The PS2SmartTouchpad literally has a config to it, but it is quite hidden. PS2SmartTouchpad.kext -> Contents -> PlugIns -> ApplePS2Keyboard.kext -> Contents -> Info.plist has all the config to it, and I was successfully be able to modify it. Thanks a lot anyways, I still owe you. Mark as solved!

Oh my god.... Yes, I'm very very sorry... Of course I meant the dump. There it is, sorry again: http://s000.tinyupload.com/index.php?file_id=88137459423744675616

Hello everyone! Recently, Mald0n helped me for my Lenovo 700-15ISK back a month ago (which I very very thank you - a donation is still on horizon), but I want to make some changes to (possibly the DSDT file?) I'm using PS2SmartTouchpad Kext and everything is working flawlessly. My only problem is, that the brightness (and all fn) keys are replaced. The brightness keys turns the volume, and the mute switch and the vol down (next to each other) are turning the brightness. My question is, is there any way (or how-to) to change these? I'll attach my Send-me.app output, and also an image to my keyboard, and the CURRENT functions they produce. I'd like to replace the brightness and volume keys (and the mute). Anything else is irrelevant for me since I don't have music control buttons (or maybe the Launchpad to F8?) My RunMe.app output: http://s000.tinyupload.com/index.php?file_id=02008239619705737152 My keyboard: http://s000.tinyupload.com/?file_id=78673158108386776029 Thanks a lot with every help!

Thanks! I think the sleep issue has been fixed, but the HDMI remains. I have tried to make the Framebuffer and connector patch as per the Hackintool states. I attach the screenshot, that is my result. Hotplugging still a problem. Fresh booting: - Whenever I plug in any HDMI, it works with sound. When I plug out the cable, the screen goes to black, nothing responds. Waking up from sleep: - HDMI Plug in works with sound. HDMI unplug ALSO works for a couple of hot plugging, then it does the same as fresh booting. I have read about a Skylake Spoofing, this error was on Koffee Lake as well, but I don't need spoofing, I'm on Skylake already. (I have tried before but it's the same) What am I doing wrong? https://i.imgur.com/8ZCW0v9.png' alt='IMGUR>'>

Hi Ok so I don't know what witchcraft is going on in this folder, but everything works out of box (I replaced all Vodoo kext with PS2SmartTouchpad because my keyboard and touchpad wouldn't work otherwise) Also I added key feeder and ui drawer .efi because I have FileVault enabled. https://drive.google.com/open?id=146lrpDZYzTVM3djOfXuAzv0-eRTdsLOb HDMI is still a problem, I have tested it. Hotplugging works, but hot unplugging does not. It freezes! (BUT BUT, when I go to sleep first, then wake up from sleep, hot unplugging does work!) Also, the sleeping should be a problem still. I tried 3 times, it works, but I'm keep trying. Could you check on it, please?

Hello! I have been using Catalina for the last 1 month and it is absolutely great! I only have 2 problems. 1, and my biggest is that sometimes (again, sometimes, 5 of 10 times?) my laptop is not going to sleep, it just goes into black screen, and never comes back, I have to restart the laptop the hard way. pmset -g shows that UserEventAgent is the preventer, but I cannot figured out what could cause it... 2, my HD 530 card.... it is doing a weird thing that if I plug in a HDMI cable, the screen is fine, however if I plug OUT the cable the computer straight up freezes, black screen and does nothing (exactly like on sleeping, maybe they are hands-on each other), I have to restart my laptop again. Other than that, everything works fine (except DRM but nevermind that) I attached the sendme.app output, so everything is inside, but here's my config: - Lenovo 700-15ISK - i7 6700HQ (Skylake) - HD 530 - 16GB DDR4 - Catalina 10.15.2 Since it is too large to post the whole here, I'll host it in Google Drive. If it is not okay, please let me know and tell me how should I upload the whole thing. https://drive.google.com/open?id=1JMy8ZLHtvcdUkHc_19IJD3LNL6edMRvY Thanks in advance!