chocointed

Hi, please check the attached link for my RunMe.app dump. https://www48.zippyshare.com/v/fLITEzt7/file.html Currently everything works fine, except headphone jack audio/maybe mic jack input. (Headphone jack is a combo port), but I'm currently using multiple DSDT files to fix up display/USB inject/GPIO pinning, and WiFi doesn't work but since I'm using a default Intel WiFi card, I will try and fix it again when I can get a replacement. Currently I have also Windows 11 Pro installed, although it's not booting with OC but Windows Bootloader, but as long as it works, it's fine. Attached below is my OC EFI folder, and for my external display, does this mean that I will have no chance to fix up external display support? With the screenshot above, does it mean that my external display will never work? iGPU is Intel UHD 630. TL/DR: External display doesn't work, audio jack doesn't work(Speakers work), ALC294 driver, running layout ID 11.

Hi everyone, I have just installed Big Sur from the latest image provided here and currently I'm trying to post setup it properly, I manually replaced OpenCore that came with the original image to Clover as I was getting Kernel panics and can't even boot into the installer. But Clover worked wonders and I'm on the system currently, how should I reinstall my EFI folder to the drive? As I have plans to dual boot Windows 11 Pro on the same drive(It's a laptop), any recommendations on what I should do/or should not do, or should redo like reinstall with OpenCore? The system is currently empty and the whole SSD is empty as well, would appreciate any advices. P/S: I tried installing Windows 11 but the installer failed, which I can only assume because I do not have a proper EFI partition setup atm, it just kicks me back and says installation failed and I should try restarting the installer. Currently also booting with my USB drive's EFI to get into Mac. Currently my SSD looks like this. disk0s5 is the partition I plan to install Windows 11 Pro to.

Oh okay thanks for the recommendation, I'll look into it and see if I can get it working

Is there any cheap Nvidia GPU that can work with hackintoshes? Or AMD GPUs? Cause this is just gonna be an enthusiast project PC at most so I'm not really looking to spend too much on a GPU to get it working..

Intel Integrated G41 Express Chipset, do I need a dedicated GPU to make this work?

Alright that fixed my issue, I have installed it and I'm currently trying to boot into it being installed on another HDD, but currently I'm getting kicked out of the system before even reaching any kind of booting screen. Booting with default config and blocked CpuTscSync.kext https://streamable.com/7y1t8k

Config 1 Kernel Panic: https://streamable.com/uuw527 Config 2 Kernel Panic: https://streamable.com/vvpvj0

What should I do with this kext?

I tried using LGA 775 stock but I still get kernel panics when booting into it

After replacing my clover folder with the one for LGA775, and I got these two with config and config2 I have blocked CpuTscSync.kext as well Config: https://streamable.com/uuw527 Config2: https://streamable.com/vvpvj0

CPU: Intel Core 2 Quad Q9400 GPU: Intel G41 Express Chipset RAM: 4GB Motherboard: ASUS P5G41C-M LX Storage: Kingston A400 240GB + 1TB WD Blue 2.5" HDD https://streamable.com/yej7vo (It is in slow motion) Hi Olarila, here's my video of my boot kernel panic log. Does anyone have any advice on it? I have disabled everything that is needed from the BIOS config but as my BIOS is quite rudementary I can't really disable much. I have tried using an EFI folder for 775 socket but I'm still getting kernel panicks, I appreciate any help that is given.

So far, all I know it's a PS2 trackpad. But the exact model I am not very sure of.

Hi everyone, right now I have a laptop with the specs listed below CPU: Intel i5-2140m GPU: Radeon HD 6470M (Disabled as it has a damaged chip physically) + Intel HD Graphics 3000 RAM: 4GB DDR3 SSD: Kingston 240GB SSD I currently have Mojave booted on it, and I have it booted fully with GPU acceleration on the Intel HD Graphics 3000 and generally usable in every way. Right now I have an issue with the Trackpad and USB mouse. I have tried multiple EFI folders, from the original Mojave Installer EFI folder, to the custom one from the pinned links. And I have encountered the issues listed below. 1) Keyboard and trackpad both allows input, but trackpad buttons and single/double/triple click does not work, whereas USB mouse works. 2) Keyboard and trackpad both allows input, but trackpad buttons and single/double/triple click does not work, where the USB mouse laser isn't powered but the RGB is powered on (It has power delivered but can't accept input) I haven't requested for a DSDT patch, so if that will help, I will create a thread in there, but is there any solutions for my problems with the trackpad/mouse? Thanks for the replies given in advance. I have installed VoodooPS2Controller in S/L/E and L/E and have recreated my kext cache. *Update currently I have another issue where none of my external disks or USB plugged in is detected.

I have tried fixing audio with VoodooHDA and AppleALC, with injecting but both doesn't work. VoodooHDA works only with headphones not speakers. VoodooI2C doesn't work and keeps spitting out errors.

Hi! Thank you for helping with the patch, now I have a working battery indicator, but the touchpad and sound is still not working, any recommendations?