nonits

Hi Everyone, Can anyone help me with my hackintosh? It is mostly working fine except that sometimes it boots slow and sometimes it freezes after I log in. My system specs are below: Mobo: Gigabyte Z370N Wifi Processor: i7 8700 Ram: 2 x 16gb corsair lp ram GPU: MSI RX 5700 XT EXOC Storage: 2 x NVME SSD Thanks!

When typing and your palm touches the trackpad it shouldnt register a click

by the way do you have any suggestions re: getting palm rejection to work?

I see, looks like I fixed it - I saw a thread on a forum about adding the AppleHDA.kext from Mojave to L/E. So instead of moving it to L/E I figured I should just move it to Kexts/Other and it worked There is about 30 secs delay after system starts before it starts working but I'm not complaining. I have almost everything working except for TB3 which is something I will focus on as a side project next. Thank you for all your help!

I just checked the BIOS and im on the current one. I did not change this either from the last time it was working. Maybe my DSDT still needs re-patching after I reinstalled? Added in 7 minutes 50 seconds: all the solutions Im seeing asks me to put the kexts on L/E which I know you do not recommend...

I tried the one that used to work before I used your EFI but that doesnt work. Also I dont think voodooI2c is working right in terms of palm rejection when I type the cursor goes to different places after I have typed a few words. Latest send_me: http://s000.tinyupload.com/?file_id=37476814827700297118

Trackpad started working after I installed windows and several restarts - its just audio Im having an issue with now. My latest send me is below: http://s000.tinyupload.com/?file_id=56030837383966536356

@MaLd0n I finally figured it out! I was able to find a framebuffer that only had one display connection so when it wakes up it does not look for a different display. Sleep is now working great. I have done a lot of reinstalls though so even if I am still using the EFI you created I have lost my trackpad and sound functionality - can you please help me get it back? My new run me is below: http://s000.tinyupload.com/index.php?file_id=96657637693990336297

I have my dgpu disabled so when I wake from sleep and connect to HDMI im sure its going through the IGPU...

I was thinking about that butI spent all day trying out different framebuffer settings but nothing worked. I think it what happens is that when it wakes up from sleep it cant find the internal display so it tries to use a different port instead - in my case its HDMI. I dont have any access to a displayport dongle so I cant test if it would work on DP at wake too. Im fresh out of ideas though - I mean I think how it works on HDMI after wake is a clue - I guess im just not experienced enough to use that to figure a fix out.

sklake causes KPs lol

None of the solutions above work so far. I think its either I find a way to make it connect back to the internal display on wake or try different framebuffers until I find one that works. Would spoofing skylake instead of kaby and coffee lake be worth a shot? I have my dvmt set to 64mb so I should have a lot more choices for FB patches right?

The kext does not work but I just found something out. When I put the laptop to sleep just now I tried to plug it into the usb c dongle and the external display worked! it works on extended mode so I still cant do anything as the main display seems to be dead. Maybe when I put the laptop to sleep and it tries to wake up it cant connect back to the external display?

still didnt work latest send me: http://s000.tinyupload.com/?file_id=61082452111799049758 I even tried this: https://noobsplanet.com/index.php?threads/patch-wake-from-sleep-black-or-glitchy-screen-fix.19/ maybe I should give up? when I try to put it to sleep Im sure the system does not actually sleep. The display is off but there is a backlight. Pressing the volume buttons makes me hear sounds so I know the OS is active the display just doesnt want to show anything. Added in 14 minutes 52 seconds: I'm wrong sorry. It does go to sleep it just takes about a minute to go into sleep mode. the keyboard turns off and the status light changes to white which indicates sleep. the display just wont wake up after the display turns off.

sure I'll try to do the fix. is there a guide I can follow? By the way I have been trying other device ids and found that 9B3E0000 plus lilucpu=10 makes the brightness keys work perfectly. heres a send_me using that new device id: http://s000.tinyupload.com/index.php?file_id=74367305672981535558 Added in 35 minutes 52 seconds: i tried using hackintool to fix the edid but I'm not sure if I did it right lol. I attached the patched plist for you to check out config.plist.zip

Hi, I added the DSDT and SSDT you sent to my ACPI and rebooted then tested Sleep - issue is still the same. below is my latest send_me: http://s000.tinyupload.com/?file_id=08366516908768433151 I really appreciate your patience and help! I donated again to buy you a beer and show my appreciation Note that I added cpufriend in kexts/ others

thats weird I opened the send_me zip and it shows an ACPI folder with a bunch of stuff in it. thats not the one in my EFI. The one I have matches the Clover folder in the send_me Added in 14 minutes 59 seconds: I deleted all the other EFI backups on the EFI partition and all files in the desktop (except run_me) rebooted and re ran run_me with the below results: http://s000.tinyupload.com/?file_id=19313618674681047189 The only change I made is added "recovery" in gui so I dont see the recovery drive and set catalina as the clover theme Added in 15 minutes 37 seconds: out of curiosity I also tried plugging the laptop into the usbc dongle I have thats connected to an hdmi. The left port (non tb3) works except for HDMI (not detected) the right port (tb3) caused a restart when I plugged the dongle in and went straight to a kernel panic after restart. heres what the report said: panic(cpu 0 caller 0xffffff8000462e0a): Kernel trap at 0xffffff7f8430a514, type 14=page fault, registers: CR0: 0x000000008001003b, CR2: 0x00000000000001dc, CR3: 0x000000001691d000, CR4: 0x00000000003626e0 RAX: 0xa0e3fd27344500d5, RBX: 0x0000000000000002, RCX: 0x0000000000010002, RDX: 0x0000000000000001 RSP: 0xffffff81f0db3e20, RBP: 0xffffff81f0db3ea0, RSI: 0x0000000000000001, RDI: 0xffffff8035eda2a0 R8: 0x0000000000000001, R9: 0x0000000000000002, R10: 0x0000000000000000, R11: 0xffffff80335fa440 R12: 0x0000000000000000, R13: 0x0000000000000000, R14: 0x0000000000000000, R15: 0xffffff8035fe2000 RFL: 0x0000000000010202, RIP: 0xffffff7f8430a514, CS: 0x0000000000000008, SS: 0x0000000000000010 Fault CR2: 0x00000000000001dc, Error code: 0x0000000000000000, Fault CPU: 0x0, PL: 0, VF: 1 Backtrace (CPU 0), Frame : Return Address 0xffffff81f0db3880 : 0xffffff8000339a3b 0xffffff81f0db38d0 : 0xffffff8000470fe5 0xffffff81f0db3910 : 0xffffff8000462a5e 0xffffff81f0db3960 : 0xffffff80002e0a40 0xffffff81f0db3980 : 0xffffff8000339127 0xffffff81f0db3a80 : 0xffffff800033950b 0xffffff81f0db3ad0 : 0xffffff8000ad17f9 0xffffff81f0db3b40 : 0xffffff8000462e0a 0xffffff81f0db3cc0 : 0xffffff8000462b08 0xffffff81f0db3d10 : 0xffffff80002e0a40 0xffffff81f0db3d30 : 0xffffff7f8430a514 0xffffff81f0db3ea0 : 0xffffff7f842e7c3c 0xffffff81f0db3ee0 : 0xffffff8000a401bd 0xffffff81f0db3f30 : 0xffffff8000a3eb02 0xffffff81f0db3f70 : 0xffffff8000a3e08c 0xffffff81f0db3fa0 : 0xffffff80002e013e Kernel Extensions in backtrace: com.apple.driver.AppleIntelKBLGraphicsFramebuffer(14.0.2)[5D601EC7-18BD-3FBE-8E5B-7E86487FC756]@0xffffff7f842b5000->0xffffff7f844e0fff dependency: com.apple.iokit.IOPCIFamily(2.9)[AA7C7A4F-9F5D-3533-9E78-177C3B6A72BF]@0xffffff7f810a2000 dependency: com.apple.iokit.IOACPIFamily(1.4)[4A40B298-87E0-373E-84A9-9A2227924F8F]@0xffffff7f81090000 dependency: com.apple.iokit.IOAcceleratorFamily2(438.2.7)[72B8A0B5-E12C-3764-9187-0AC0E93416F9]@0xffffff7f841f2000 dependency: com.apple.iokit.IOReportFamily(47)[2CCA7DD3-C33F-3CA4-A213-BC83D3D997B0]@0xffffff7f80c9f000 dependency: com.apple.AppleGraphicsDeviceControl(4.5.9)[AB076CA9-0E87-382E-BDF3-527D9F278B23]@0xffffff7f816d3000 dependency: com.apple.iokit.IOGraphicsFamily(568)[247C211E-C250-351C-BCE2-4DB9D3003E10]@0xffffff7f8138f000 BSD process name corresponding to current thread: kernel_task Boot args: dart=0 lilucpu=9 -cdfon -igfxmlr igfxcflbklt=1 darkwake=0 -wegnoegpu Mac OS version: 19B88 Kernel version: Darwin Kernel Version 19.0.0: Thu Oct 17 16:17:15 PDT 2019; root:xnu-6153.41.3~29/RELEASE_X86_64 Kernel UUID: 7503CD47-851F-321E-8747-50DB4299165F __HIB text base: 0xffffff8000100000 System model name: MacBookPro15,2 (Mac-827FB448E656EC26) System shutdown begun: NO Panic diags file available: YES (0x0) System uptime in nanoseconds: 1297643352843 last loaded kext at 1296195118063: >usb.!UHub 1.2 (addr 0xffffff7f81547000, size 221184) loaded kexts:

here you go: http://s000.tinyupload.com/?file_id=38174583521089862205 additional detail I notice is that only the last 4 bars work for brightness with the lowest being totally dark.

Hi, I didnt put an SSDT I just pasted your EFI

here you go: http://s000.tinyupload.com/?file_id=06552062253112855497 still the same sleep issue. touchpad prefpane is back and all gestures are working. Brightness is now very bright as well

hi again! I did a fresh install of Catalina (I couldn't reinstall Mojave) and this time I did not put any kexts in the system. The issue is still the same though When I wake up from sleep I only get a backlit screen but its blank. my new send_me is linked below: http://s000.tinyupload.com/?file_id=38174583521089862205 I only get basic functionality on my trackpad now too. I lost the touchpad preferences.

i see. but those kexts work though. what can I do to fix?

here's the output from the repair: Terminal Saved Output.txt

okay, I don't remember putting any kext in S/L/E the kexts in Clover/kexts/other are there just so I have a backup while im experimenting trying to solve this. should I remove all kexts I put in S/L/E? would that solve the sleep issue?

thanks! I just PM'ed you the link to the dumps. its really just the sleep and wake that bothers me Added in 38 minutes 36 seconds: thanks for the file. here's the link to the new send_me: http://s000.tinyupload.com/?file_id=04713440363600790856 Still same black screen with backlight when waking from sleep. I noticed that brightness is a lot brighter but other than that it booted up fine.