Graissechel

Here is the RunMe archive : https://drive.google.com/file/d/1ioqMToZKbTZD_jlh0uQrp-9Rnh0iD7iN/view?usp=sharing Thanks to Hackintool I managed to install Wifi and it works. However the Bluetooth does not work The problems mentioned above are still current despite the attempts I have made to modify them

Nobody can help me ?

I added and replaced the drivers in your archive to put them in my EFI partition but it didn't change much. I'm also trying to set up the Wifi with the itlwm.kext but it doesn't seem to work even if you follow the instructions on https://openintelwireless.github.io/itlwm/ and either in the EFI partition or in /Library/Extensions. In the terminal I have an error of this type : Defaulting to kernel file '/System/Library/kernels/kernel'. Executing: /usr/bin/kmutil load --bundle-path /tmp/itlwm.kext Error Domain=KMErrotDomain Code=71 "Unable to resolve dependencies for com.zxystd.itlwm: 'com.zxystd.itlwm' names a dependency on 'com.apple.kpi.mach', which was not found." UserInfo={NSLocalizedDescription=Unable to resolve dependencies for com.zxystd.itlwm : 'com.zxystd.itlwm' names a dependency on 'com.apple.kpi.mach', which was not found.} There's a chance to fix this Wifi problem, so it would be cool if it could be solved. About the rest, i.e. the buggy graphics, the FN keys on the keyboard, the touchpad or the About this Mac which is incomplete how to do ?

I managed to install BigSur. But I'm encountering some problems : the drivers I followed the tutorials but I can't get my machine to work at all. I had the same problem with HighSierra at the time First of all, the graphics have glitches that are quite disturbing (I had to use the EFI files of the boot key otherwise I couldn't boot up) My processor is not recognized in "About this Mac", nor the serial number or the model of the Mac and I don't know how to modify it at all with OpenCore The only functional driver is the Ethernet one, I can access the internet without any problem on it Then, the usual problems : glitchy graphics, touchpad, FN keys on the keyboard, battery indicator (functionnal but buggy), etc... EDIT : Sound finally work Conexant CX8150 with layout 21 I had tried to remove some kext that I didn't need but if I did it I couldn't boot and I don't understand at all why. And often the boot crashes 1 time out of 2 it shows me : "EXC_RESOURCE -> MRT [75] exceeded mem limit: InactiveSoft 50 MB (non-fatal)" followed by a line saying that my hard disk is mounted and dismounted. And finally the line that blocks everything: "IOKit Daemon (kernelmanagerd) stall[0], (60s): 'X86PlatformPlugin' " I put here the link of the SendMe : https://drive.google.com/file/d/1i7oell5xY1GSxKBBcDyKSmuyzsGlWgy3/view?usp=sharing Could someone please help me?

After a long day of hard work trying to follow the tutorials, I run into some awkward issues With OpenCore, the boot crashes every other time, it's quite random. Moreover, once the OS is installed, it's impossible to access the EFI partition, the terminal tells me there's an error that prevents me from mounting the volume. I tried to format the partition in FAT16 or FAT32, it's the same without success. But no problem with HFS. So I'm stuck for this part because I can't install the drivers or configure the config.plist I also tried with Clover since I'm a bit more familiar with this bootloader to try to solve the problems, I did download as the guide indicated the Clover file corresponding to my chipset but I can't boot, I end up with a forbidden logo. So what do I have to do to make it work ?

Hi everyone, I had already previously opened a topic to install High Sierra however, for personal reasons I had to remove it :/ I would like to install Big Sur now but with OpenCore, I can't even boot on it, I'm stuck on the "DSMOS has arrived" line so it's totally impossible to install the OS. Knowing that my NVIDIA graphics card was a problem at first, I could disable it with Clover in High Sierra but this is obviously not the case here with OpenCore. So I can't install it. I put below my hardware configuration, some of my components were natively supported and others required patches : Processor : Intel Core i7-8750H (2.2Ghz 6 Cores) Motherboard : Asus X580GD (with HM370 chipset) Graphics Processor : Intel UHD Graphics 630 RAM : 32GB (HyperX 2x16GB DDR4 2666MHz) Graphics Card : Nvidia GeForce GTX 1050 4GB -> Discrete GPU but never work Wifi : Intel Wireless AC 9560 + Bluetooth -> Maybe it can work with this kext : https://openintelwireless.github.io/itlwm/ Ethernet: I didn't have to install a kext on High Sierra, I think it could be supported natively SD Card Reader: Realtek USB 2.0 Card Reader (Never work on High Sierra) Headphone/microphone jack (combo) Fingerprint: ELAN WBF Fingerprint Sensor (Never work on High Sierra) Touchpad: Asus Precision Touchpad (Works after long manipulations in the configuration files) Webcam : Supported natively Audio : Worked very well with AppleALC.kext, just need to find the audio ID Storage : Samsung SSD 980 Pro 1TB Battery : Battery indicators were a bit buggy on High Sierra I also have 1 USB 3.0, 2 USB 2.0, 1 USB type C and 1 HDMI port (HDMI never work because it's connected to the NVIDIA graphic card) I try to be as precise as possible in describing my configuration, I also put a link to the Asus website about my model : https://www.asus.com/us/supportonly/N580GD/HelpDesk/ Thank you in advance for your help.

It doesn't change anything with the config.plist you gave me, touchpad still not working. Here is the SendMe : https://drive.google.com/open?id=1pMVrQ8ePV6GfYnbh1Rdn_up0Tk1DbL_L

Sorry, but it still doesn't work. Here is the SendMe : https://drive.google.com/open?id=1YISAHYZnG-poV4qckfYP3TcXSXdfiC3C EDIT : I just saw that you added the config.plist, I'll try again with it.

Still no functional touchpad. I don't know if you saw it, I edited the message above by putting what I was put on Gitter, hoping it would help you. Here is the SendMe : https://drive.google.com/open?id=1g5DB6bpgeWcv4XeNYZ5TtAOkt4Iuw2E1

With this version I can boot. However, the touchpad is still not working and I have lost the Fn Keys and the ability to decrease or increase the brightness of the screen. Here is the SendMe : https://drive.google.com/open?id=1nqDVYYl_CKAnTRamuKLUN41piqMNg-ei They replied to my message on Gitter and told me : "@Graissechel You shouldn't be patching ETPD._STA, revert to original"

I'm stuck at "End Randomseed" when I block DSDT, so I reactivate it. Here the SendMe : https://drive.google.com/open?id=1Mq1gg-ic9FUrs7eArV5OYRq0ngtbHcKM

Luckily, I kept the High Sierra installation key. I boot on it with what you gave me and here's what's going on (SendMe archive) : https://drive.google.com/open?id=1IgRai4cR3VdI6zptRYZytRGgzXb9TVg8

Ok I'll try to solve this problem on gitter, I'll post the solution here when it's found. In the meantime we can try to solve the other problems. For the HDMI port, it is connected to my Nvidia graphics card so it will not work. However I have an alternative to this problem, I have a USB C to VGA converter and it works very well, the display is perfectly fine so no problems at this level, my USB C port is fine. For iMessage and FaceTime, I had tried to make them work before reinstalling macOS and I got this error code each time: "Your Apple id "xxx@xxx.com" can't be used to set up iMessage at this time" However, in Clover, my SMBIOS does send me an invalid serial number, which is necessary to avoid conflicts with existing devices. So I don't really know how to solve this. For the sleep problem, when I click on the button to sleep in the Apple menu, my PC puts a black screen on me and then goes into sleep. However, it turns on again immediately after I have touched nothing. To restore the display, I have to press the Space bar to turn the screen back on. For the SD player problem I don't know where it comes from either.

I put the kext VoodooI2C and VoodooI2CHID in /Library/Extensions. I no longer have the problem of "kext failed to load". On the other hand my touchpad is still not functional and I have this in the kernel log : https://imgur.com/cyD4KU3

I thought I had found the culprit. From what I understand from the screenshot, it seems that the kext com.alexandred.VoodooI2CHID can't load due to an error. I think that this error could be the cause of the problem. (I just posted this same message on the VoodooI2C page on gitter to see if the community has already faced the same problem) Link to the screenshot : https://imgur.com/34PpCAn