-->Donations via PayPal [External Link Removed for Guests] :guitar
-->Installation/Post Installation Tutorial [Local Link Removed for Guests]
-->Useful Links [Local Link Removed for Guests]
-->Olarila Images - Updated images [Local Link Removed for Guests]
-->Guides and Tutorials [Local Link Removed for Guests]
-->Clover Folder for All Chipsets [Local Link Removed for Guests]
-->DSDT Patch Requests [Local Link Removed for Guests]

[Guide] Install MacOS with Olarila Image, Step by Step, Install and Post Install, Windows or Mac

cm0270
Posts: 40
Joined: 27 Jan 2019, 21:32
CPU: i7-8700
Motherboard: Asrock Killer SLI AC Z270
GPU: GF 710

[Guide] Install MacOS with Olarila Image, Step by Step, Install and Post Install, Windows or Mac

Post by cm0270 » 01 Aug 2019, 20:59

MaLd0n,

Replaced the EFI folder you sent me as it was. Nothing added or anything. Had to boot up from the USB which was fine. Got back into Mojave and ran the RunMe app. Here are the files from it.

Code: [Local Link Removed for Guests]

https://www.mediafire.com/file/nt2zcsve29pvavt/Send_me_Brads-MacBook-Air.zip/file
I had created a backup drive with Carbon Copy and used that drive. It boots with USB but of course nothing is good on it. Ethernet, wifi, Intel HD4600, etc because it was just a generic file to run the RunMe app.
User avatar
MaLd0n
Site Admin
Site Admin
Posts: 13526
Joined: 05 Dec 2010, 19:35
CPU: i9-9900K
Motherboard: GA Z390 M GAMING
GPU: RX 590 8 GB
Location: Rio de Janeiro, Brazil
Contact:

[Guide] Install MacOS with Olarila Image, Step by Step, Install and Post Install, Windows or Mac

Post by MaLd0n » 02 Aug 2019, 02:46

cm0270, use ur old config
DSDT.aml.zip
You do not have the required permissions to view the files attached to this post.
:guitar[External Link Removed for Guests]:guitar-[Local Link Removed for Guests]:guitar

Problems with Paypal Donate? Check [Local Link Removed for Guests]

-Donated? Send me one PM-
cm0270
Posts: 40
Joined: 27 Jan 2019, 21:32
CPU: i7-8700
Motherboard: Asrock Killer SLI AC Z270
GPU: GF 710

[Guide] Install MacOS with Olarila Image, Step by Step, Install and Post Install, Windows or Mac

Post by cm0270 » 02 Aug 2019, 04:09

What changes were made on the DSDT?

At least my CPU doesn't sound like a rocket trying to take off anymore unless I push it. Before it was running high speeds without much usage.

Also the screen doesn't seem to be flickering anymore like it was. That is a good sign.

Any idea on how I would go about trying to get the webcam and SD Card Reader working... or is that even possible? Card reader just shows SD (XC/HC) for specs when looking them up for the laptop. Webcam... no clue at all. Just know it is 720p resolution. Unfortunately MSI didn't bother to release those specs out that I can find anywhere.
User avatar
MaLd0n
Site Admin
Site Admin
Posts: 13526
Joined: 05 Dec 2010, 19:35
CPU: i9-9900K
Motherboard: GA Z390 M GAMING
GPU: RX 590 8 GB
Location: Rio de Janeiro, Brazil
Contact:

[Guide] Install MacOS with Olarila Image, Step by Step, Install and Post Install, Windows or Mac

Post by MaLd0n » 02 Aug 2019, 05:07

cm0270, extract one new sendme with last file
:guitar[External Link Removed for Guests]:guitar-[Local Link Removed for Guests]:guitar

Problems with Paypal Donate? Check [Local Link Removed for Guests]

-Donated? Send me one PM-
hoangtuau
Posts: 11
Joined: 23 Oct 2018, 12:51
CPU: i5 3470
Motherboard: giga b75
GPU: gtx 1050

[Guide] Install MacOS with Olarila Image, Step by Step, Install and Post Install, Windows or Mac

Post by hoangtuau » 02 Aug 2019, 07:23

Please tell me,Hachintosk suppport for cpu core ị5 9400f ??. Thanks!
hachipud
Posts: 4
Joined: 22 Jul 2019, 18:33
CPU: intel core i3 - 7100
Motherboard: msi b150 night elf
GPU: zotac nvidia Gtx 950

[Guide] Install MacOS with Olarila Image, Step by Step, Install and Post Install, Windows or Mac

Post by hachipud » 02 Aug 2019, 09:03

Hello sir,
I have done a patch on dsl.aml and the sound card has been detected but the sound is too small.

how to fix it? layout id in aml file? or in the config.plist file or need another patc?
User avatar
MaLd0n
Site Admin
Site Admin
Posts: 13526
Joined: 05 Dec 2010, 19:35
CPU: i9-9900K
Motherboard: GA Z390 M GAMING
GPU: RX 590 8 GB
Location: Rio de Janeiro, Brazil
Contact:

[Guide] Install MacOS with Olarila Image, Step by Step, Install and Post Install, Windows or Mac

Post by MaLd0n » 02 Aug 2019, 14:11

hoangtuau, yes

Added in 21 seconds:
hachipud, check useful links in my signature
:guitar[External Link Removed for Guests]:guitar-[Local Link Removed for Guests]:guitar

Problems with Paypal Donate? Check [Local Link Removed for Guests]

-Donated? Send me one PM-
cm0270
Posts: 40
Joined: 27 Jan 2019, 21:32
CPU: i7-8700
Motherboard: Asrock Killer SLI AC Z270
GPU: GF 710

[Guide] Install MacOS with Olarila Image, Step by Step, Install and Post Install, Windows or Mac

Post by cm0270 » 02 Aug 2019, 15:53

MaLd0n,

Latest files from RunMe app with current working configuration.

Code: [Local Link Removed for Guests]

https://www.mediafire.com/file/4ueq8qgp8jmwfbq/Send_me_Brads-MacBook-Air.zip/file

Found some information on card reader:

Realtek Semiconductor RTS5249 PCI-E Card Reader

Device PCISTOR\Disk&Ven_RSPER&Prod_RTS5208LUN0&Rev_1.00\0000 was not migrated due to partial or ambiguous match.

BIOS Device name: \_SB.PCI0.RP03.PXSX

Bus Type GUID: {c8ebdfb0-b510-11d0-80e5-00a0c92542e3}

Hardware Info 64 screenshot below:

[External Link Removed for Guests]
Saikido
Posts: 2
Joined: 28 Jul 2019, 20:20
CPU: intel i5
Motherboard: acer
GPU: Nvidia

[Guide] Install MacOS with Olarila Image, Step by Step, Install and Post Install, Windows or Mac

Post by Saikido » 02 Aug 2019, 16:45

Hello, I am a nwebie in installation of mac osx on non mac computer, I managed to burn the Olarila image to my USB stick and I booted on it. Then I launched the mac os installer through clover but it's impossible to me to select my hard drive to install the os... I have formatted my entire hard drive to Mac OS Extended and selected the GUID option too but no way... I would like to know if I absolutely need an SSD or what? Or the problem is elsewhere?
Please help me...
User avatar
MaLd0n
Site Admin
Site Admin
Posts: 13526
Joined: 05 Dec 2010, 19:35
CPU: i9-9900K
Motherboard: GA Z390 M GAMING
GPU: RX 590 8 GB
Location: Rio de Janeiro, Brazil
Contact:

[Guide] Install MacOS with Olarila Image, Step by Step, Install and Post Install, Windows or Mac

Post by MaLd0n » 02 Aug 2019, 18:21

cm0270, pci only via kext

Added in 20 seconds:
Saikido, what ur hardware?
:guitar[External Link Removed for Guests]:guitar-[Local Link Removed for Guests]:guitar

Problems with Paypal Donate? Check [Local Link Removed for Guests]

-Donated? Send me one PM-
cm0270
Posts: 40
Joined: 27 Jan 2019, 21:32
CPU: i7-8700
Motherboard: Asrock Killer SLI AC Z270
GPU: GF 710

[Guide] Install MacOS with Olarila Image, Step by Step, Install and Post Install, Windows or Mac

Post by cm0270 » 02 Aug 2019, 20:28

What do you mean "pci only via kext"?? Is there a kext file for the SD Card Reader?

Managed to find out "some" information on webcam but probably not much. Nothing as to vendor, model, etc. Restored my old original settings when I got laptop with Windows 8.1 and it sees the webcam in settings under device manager and imaging devices as "USB 2.0 Webcam Device" but not much else. Copied some of the information from driver section about it:

Code: [Local Link Removed for Guests]

Driver Management has concluded the process to add Service usbvideo for Device Instance ID USB\VID_064E&PID_9807&MI_00\7&2858A518&0&0000 with the following status: 0.

Driver Management has concluded the process to add Service usbvideo for Device Instance ID USB\VID_064E&PID_9807&MI_00\7&2858A518&0&0000 with the following status: 0.

USB\VID_064E&PID_9807&REV_0100&MI_00

USB\VID_064E&PID_9807&MI_00

USB\Class_0e&SubClass_03&Prot_00

USB\Class_0e&SubClass_03


USB\Class_0e

Container ID:  {00000000-0000-0000-ffff-ffffffffffff}


Locations

PCIROOT(0)#PCI(1A00)#USBROOT(0)#USB(1)#USB(4)#USBMI(0)
PCIROOT(0)#PCI(1A00)#USBROOT(0)#USB(1)#USB(4)#USB(4)
ACPI(_SB_)#ACPI(PCI0)#ACPI(EHC2)#ACPI(HUBN)#ACPI(PR01)#ACPI(PR14)#ACPI(CAM0)

Last known parent:   USB\VID_064E&PID_9807\HF1016-T840-HN03-REV0100

BIOS Device Name:   \_SB.PCI0.EHC2.HUBN.PR01.PR14.CAM0
User avatar
MaLd0n
Site Admin
Site Admin
Posts: 13526
Joined: 05 Dec 2010, 19:35
CPU: i9-9900K
Motherboard: GA Z390 M GAMING
GPU: RX 590 8 GB
Location: Rio de Janeiro, Brazil
Contact:

[Guide] Install MacOS with Olarila Image, Step by Step, Install and Post Install, Windows or Mac

Post by MaLd0n » 02 Aug 2019, 20:36

cm0270, realtek pci device card reader work only via kext
:guitar[External Link Removed for Guests]:guitar-[Local Link Removed for Guests]:guitar

Problems with Paypal Donate? Check [Local Link Removed for Guests]

-Donated? Send me one PM-
Saikido
Posts: 2
Joined: 28 Jul 2019, 20:20
CPU: intel i5
Motherboard: acer
GPU: Nvidia

[Guide] Install MacOS with Olarila Image, Step by Step, Install and Post Install, Windows or Mac

Post by Saikido » 03 Aug 2019, 08:28

[Local Link Removed for Guests] wrote: [Local Link Removed for Guests]
02 Aug 2019, 18:21
Saikido, what ur hardware?
I got an Acer aspire 5750G
•with GPU: NVidia GT520M (optimus)
•and CPU intel inside core I5
•with 8GB of RAM
•and a hard drive (not ssd) of 500GB
Thank you for your help :)
User avatar
MaLd0n
Site Admin
Site Admin
Posts: 13526
Joined: 05 Dec 2010, 19:35
CPU: i9-9900K
Motherboard: GA Z390 M GAMING
GPU: RX 590 8 GB
Location: Rio de Janeiro, Brazil
Contact:

[Guide] Install MacOS with Olarila Image, Step by Step, Install and Post Install, Windows or Mac

Post by MaLd0n » 03 Aug 2019, 13:36

Saikido, post one video with ur problem, i'll check
:guitar[External Link Removed for Guests]:guitar-[Local Link Removed for Guests]:guitar

Problems with Paypal Donate? Check [Local Link Removed for Guests]

-Donated? Send me one PM-
User avatar
jhonwick
Posts: 25
Joined: 23 Dec 2018, 12:04
CPU: Core i3 2100
Motherboard: Intel D61WW
GPU: Geforce 210

[Guide] Install MacOS with Olarila Image, Step by Step, Install and Post Install, Windows or Mac

Post by jhonwick » 03 Aug 2019, 13:51

hello,
today I'm trying to install Mojave in my pc config-core-i3,geforce210 followed by olarila forum tutorials. Its almost 8hrs but still not success :( :cry: Tried many times with different process. Lastly now Im posting what actually happening till now.
1. :hammer Installed Olarila Mojave- Booted successfully- Installed Clover from olarila installer files- reboot- Installed nvidiacard.zip kext files following the tutorials for the graphics-reboot-HERE IM STUCK WITH A LOOP.(video attached what's happening [External Link Removed for Guests] )

now after trying so many steps and clean installation again and again I'm stuck with the following issues.
#1. Its took almost 12min+ to show the lock screen if I reboot or start the hackintosh. Very slow booting(images attached-as the error messages taking the whole time [External Link Removed for Guests] )
#2. Graphics card showing geforce 210 1024mb but no graphics acceleration, no transparency.
#3. When Im installing the nvdiacard.zip kext and repair permissions its looping the on the boot screen(video attached [External Link Removed for Guests] ).
---I have all the extension-kext folder backed up from my High Sierra for that if any kext need for Mojave to work :help ---
So anyone help me please, :help as normal installation working but after that I'm not able to access the graphics, audio etc.

currently on Mojave without graphics, audio etc(installed Mojave,clover thats it)
attached runme files


Regards
You do not have the required permissions to view the files attached to this post.
User avatar
MaLd0n
Site Admin
Site Admin
Posts: 13526
Joined: 05 Dec 2010, 19:35
CPU: i9-9900K
Motherboard: GA Z390 M GAMING
GPU: RX 590 8 GB
Location: Rio de Janeiro, Brazil
Contact:

[Guide] Install MacOS with Olarila Image, Step by Step, Install and Post Install, Windows or Mac

Post by MaLd0n » 03 Aug 2019, 13:54

jhonwick, use high sierra and avoid problems, some hardware loose support in Mojave and u need some mods, etc for work good
:guitar[External Link Removed for Guests]:guitar-[Local Link Removed for Guests]:guitar

Problems with Paypal Donate? Check [Local Link Removed for Guests]

-Donated? Send me one PM-
User avatar
jhonwick
Posts: 25
Joined: 23 Dec 2018, 12:04
CPU: Core i3 2100
Motherboard: Intel D61WW
GPU: Geforce 210

[Guide] Install MacOS with Olarila Image, Step by Step, Install and Post Install, Windows or Mac

Post by jhonwick » 03 Aug 2019, 13:59

MaLd0n, I was in HS. but want to use the dark mode of Mojave, as I post before for the support thats why I'm trying to do. If possible then please help. Or its my bad I've to go back to HS or need to update hardware
User avatar
MaLd0n
Site Admin
Site Admin
Posts: 13526
Joined: 05 Dec 2010, 19:35
CPU: i9-9900K
Motherboard: GA Z390 M GAMING
GPU: RX 590 8 GB
Location: Rio de Janeiro, Brazil
Contact:

[Guide] Install MacOS with Olarila Image, Step by Step, Install and Post Install, Windows or Mac

Post by MaLd0n » 03 Aug 2019, 14:23

jhonwick, use dosdude app for create ur usb stick, this app have many files for unsupported hardware
:guitar[External Link Removed for Guests]:guitar-[Local Link Removed for Guests]:guitar

Problems with Paypal Donate? Check [Local Link Removed for Guests]

-Donated? Send me one PM-
User avatar
Sampath007
Olarila Staff
Olarila Staff
Posts: 66
Joined: 10 Feb 2018, 15:03
CPU: i7-8550u
Motherboard: Acer Nitro 515-31
GPU: UHD 620
Location: india,Chennai
Contact:

[Guide] Install MacOS with Olarila Image, Step by Step, Install and Post Install, Windows or Mac

Post by Sampath007 » 03 Aug 2019, 14:24

[Local Link Removed for Guests] wrote: [Local Link Removed for Guests]
03 Aug 2019, 13:59
dark
good advice is update your gpu
if u need dark mode and 210 make work u try 10.14.2 its best way
User avatar
jhonwick
Posts: 25
Joined: 23 Dec 2018, 12:04
CPU: Core i3 2100
Motherboard: Intel D61WW
GPU: Geforce 210

[Guide] Install MacOS with Olarila Image, Step by Step, Install and Post Install, Windows or Mac

Post by jhonwick » 03 Aug 2019, 14:38

Sampath007, where to get olarila 10.14.2? there's everything up to date
Post Reply

Return to “Installation guides”