Page 4 of 6

[Guide] Native USB Fix - No Injector/Kext Required - SkyLake+

Posted: 14 Jul 2019, 00:24
by MaLd0n
swede420, extract one send_me with last files

[Guide] Native USB Fix - No Injector/Kext Required - SkyLake+

Posted: 14 Jul 2019, 09:03
by swede420
Thankyou again for helping me out on this.

[Guide] Native USB Fix - No Injector/Kext Required - SkyLake+

Posted: 14 Jul 2019, 21:23
by MaLd0n
swede420, all ports is load now, if don't work, use usbinjectall

[Guide] Native USB Fix - No Injector/Kext Required - SkyLake+

Posted: 14 Jul 2019, 21:28
by swede420
[Local Link Removed for Guests] wrote: [Local Link Removed for Guests]
14 Jul 2019, 21:23
swede420, all ports is load now, if don't work, use usbinjectall
For som reason even if I use usbinjectall only USB3 devices will load on the port that I though not working.

[Guide] Native USB Fix - No Injector/Kext Required - SkyLake+

Posted: 14 Jul 2019, 21:30
by MaLd0n
swede420, if u use usbinjectall, just use kext + usb port limit patch, remove ssdt

[Guide] Native USB Fix - No Injector/Kext Required - SkyLake+

Posted: 14 Jul 2019, 22:00
by swede420
[Local Link Removed for Guests] wrote: [Local Link Removed for Guests]
14 Jul 2019, 21:30
swede420, if u use usbinjectall, just use kext + usb port limit patch, remove ssdt
same, thanks. I am tired of this so I will drop it as is. Thankyou

[Guide] Native USB Fix - No Injector/Kext Required - SkyLake+

Posted: 20 Jul 2019, 21:19
by janjao
Hi Maldon, can u give more details of how to do it? How do i check OEM SSDT's? Wich tool i have to use to edit, etc... Im a newbie in patching this stuffs, and im slowing learning about.

[Guide] Native USB Fix - No Injector/Kext Required - SkyLake+

Posted: 20 Jul 2019, 21:40
by MaLd0n
janjao, vc tem de conferir as SSDTs OEM da sua placa mãe, pode usar o MacIasl
[Local Link Removed for Guests]

[Guide] Native USB Fix - No Injector/Kext Required - SkyLake+

Posted: 20 Jul 2019, 22:26
by janjao
É necessário fazer esse patch? ou se eu usar os kexts e o patch de limit o usb já funciona 100%?

[Guide] Native USB Fix - No Injector/Kext Required - SkyLake+

Posted: 20 Jul 2019, 22:26
by MaLd0n
janjao, se vc usar kexts e o patch vai funcionar bem, isso é o método vanila sem as kexts de terceiros

[Guide] Native USB Fix - No Injector/Kext Required - SkyLake+

Posted: 14 Aug 2019, 14:10
by mathewgx
@MaLdOn,
I use a patched SSDT-2-xh_OEMBD,aml in Clover which works fine.
But on OpenCore it doesn't. I have to use usbinjectall.kext and UIAC.aml.
Is something else I need to add to OpenCore to use SSDT-2-xh_OEMBD?

[Guide] Native USB Fix - No Injector/Kext Required - SkyLake+

Posted: 14 Aug 2019, 14:26
by MaLd0n
mathewgx, with opencore u need drop oem table and add edited oem table, Acpi/Block/TableLength

[Guide] Native USB Fix - No Injector/Kext Required - SkyLake+

Posted: 21 Aug 2019, 23:27
by RandomTech7
my laptop usb type c is not under HSxx or SSxx, looking to IOReg its under psxs, is that ok?
I'm using USBInjectAll + SSDT-UIAC

[Guide] Native USB Fix - No Injector/Kext Required - SkyLake+

Posted: 21 Aug 2019, 23:40
by MaLd0n
RandomTech7, extract one send_me

[Guide] Native USB Fix - No Injector/Kext Required - SkyLake+

Posted: 22 Aug 2019, 01:41
by RandomTech7
[Local Link Removed for Guests] wrote: [Local Link Removed for Guests]
21 Aug 2019, 23:40
extract one send_me
sorry I forget to mention is showing as usb 3.1 under "about this mac"
here is sendme::

[Guide] Native USB Fix - No Injector/Kext Required - SkyLake+

Posted: 22 Aug 2019, 13:33
by MaLd0n
RandomTech7, remove SSDT-PNLF.aml, SSDT-UIAC.aml and SSDT-USBX.aml
Remove USBINJECTALL too
DSDT.aml.zip
check with hackintool, usb tab

[Guide] Native USB Fix - No Injector/Kext Required - SkyLake+

Posted: 22 Aug 2019, 16:06
by RandomTech7
[Local Link Removed for Guests] wrote: [Local Link Removed for Guests]
22 Aug 2019, 13:33
RandomTech7, remove SSDT-PNLF.aml, SSDT-UIAC.aml and SSDT-USBX.aml
Remove USBINJECTALL too
thank you for making it all-in-one DSDT solution
it still not showing under xhc14 in IOReg, its under psxs, not showing in Hackintool usb tab as well.
but its working with 5gb speed so its ok for me.

5 photos attached here to clarify even better.
[External Link Removed for Guests]

[Guide] Native USB Fix - No Injector/Kext Required - SkyLake+

Posted: 22 Aug 2019, 17:08
by MaLd0n
RandomTech7, looks good, usb-c in ur case work native, don't need nothing, we just remove unnecessary files :cap

[Guide] Native USB Fix - No Injector/Kext Required - SkyLake+

Posted: 22 Aug 2019, 18:47
by RandomTech7
[Local Link Removed for Guests] wrote: [Local Link Removed for Guests]
22 Aug 2019, 17:08
looks good, usb-c in ur case work native, don't need nothing, we just remove unnecessary files
now I got it, thank you

[Guide] Native USB Fix - No Injector/Kext Required - SkyLake+

Posted: 30 Aug 2019, 17:29
by telepati
My all USB's stopped working. I sent to my RX560 to service and I start to use HD630 added framebuffer for HDMI to devices/properties for Z390M Gaming. I can boot but my all USB's stopped working. I cleaned cache and NVRAM with MacOptimizer but when I boot no USB anymore.

What could have happened?