Page 2 of 6

DSDT Patch Request

Posted: 10 Dec 2018, 17:53
by broadw3ll
I have windows in different disk I don't know if that would be a problem because when I try to apply the patch for Windows 10 I can't it just keep the apply button in grey, give me a moment and I'm gonna pass you my ioreg I'm in mi work haha

DSDT Patch Request

Posted: 10 Dec 2018, 19:45
by MaLd0n
broadw3ll, check what ACPI ID, is not ETPD

i some cases if u put kexts I2C, appears in ioreg and u don't need windows

DSDT Patch Request

Posted: 10 Dec 2018, 22:33
by broadw3ll
I have check and i find elan1200 under the name TPD0 but when i search on my DSDT i can't find it... here's is my DSDT, a screen shout of my IOReg and my IOReg

Edit: i have also the question that i have an asus laptop so i should use polling mode or interrupts?

DSDT Patch Request

Posted: 10 Dec 2018, 22:42
by MaLd0n
broadw3ll, check ur pin
DSDT.aml.zip

DSDT Patch Request

Posted: 10 Dec 2018, 22:57
by broadw3ll
MaLd0n in the same table of tpd0 ? or where it is that pin. i have applied the DSDT patch that u post but its i didn't change noting... thanx for the help

DSDT Patch Request

Posted: 10 Dec 2018, 23:24
by MaLd0n
press F4 in clover boot screen and run my app again, i need new SEND_ME

DSDT Patch Request

Posted: 11 Dec 2018, 00:22
by onemanosx
broadw3ll, As means of troubleshooting, please read the documentation on satellite kext. This is as important on user end to test different kext configuration aside from DSDT patching.

Also, it helps to rebuild permissions and cache and reboot 2nd time.

[External Link Removed for Guests]

DSDT Patch Request

Posted: 11 Dec 2018, 12:38
by broadw3ll
MaLd0n here is my SEND_ME file again i have pressed F4... thanx

onemanosx, i try with different kext but nothing, also i have rebuild cache and permissions when i change the kext

DSDT Patch Request

Posted: 11 Dec 2018, 12:43
by MaLd0n
broadw3ll,
DSDT.aml.zip
check if work, use VoodooI2CELAN.kext

DSDT Patch Request

Posted: 11 Dec 2018, 22:37
by broadw3ll
Hi MaLd0n it works but partially... now i can use it after i login but it just stop working a moment after that i have already change de satellite kext as you say. idk what's happening now hahah... thanx for all

DSDT Patch Request

Posted: 11 Dec 2018, 23:15
by onemanosx
broadw3ll, try with older version of voodooI2C kext might help. I am using version 2.0.2

DSDT Patch Request

Posted: 11 Dec 2018, 23:27
by broadw3ll
onemanosx, i have already tried that version and with that kext version stops working the touchpad

DSDT Patch Request

Posted: 12 Dec 2018, 02:34
by MaLd0n
now i think the problem is just a kext :mrgreen:

DSDT Patch Request

Posted: 12 Dec 2018, 03:38
by broadw3ll
Do I change the version? Or I put two satellites? Elan and CHID.kext? I have tried that before and it stops working also if I use only child and i2c next

DSDT Patch Request

Posted: 12 Dec 2018, 03:52
by onemanosx
I think it is more correct to use I2c kext together with either hid or elan. Not all 3.

DSDT Patch Request

Posted: 12 Dec 2018, 06:27
by broadw3ll
after i use the voodoo i2c kext v2.0.2 as onemanosx say the touchpad stops working even if i use again the initial 2.1.4 version... im using the last .aml that MaLdon makes me the favor of send it to me idk what's the problem now here is again mi send_me file i have only one satellite kext as yo said, onemanosx thanx for all my friends :)

DSDT Patch Request

Posted: 20 Dec 2018, 21:40
by broadw3ll
the touchpad now works fine, but the battery indicator isn't showed in the bar, and i try the brightness patch that @MaLd0n suggest but i think it only works in intel graphics as my laptop its only nvidia i try to follow this guide: [External Link Removed for Guests] ... in that guide mention than i need to do this -"fist find the _DSM method for your Graphics card, ignore any devices that are on PCI0 ie: PCI0.GFX0 your looking for graphics cards Under PCI0.PEG0
ie: PCI0.PEG0.GFX0._DSM or PCI0.PEG0.PEGP._DSM
rename the _DSM Method to XDSM and insert this Below"-

but i can't find the graphic card so i don't now where insert that patches... any help would be appreciated thanx pals

DSDT Patch Request

Posted: 21 Dec 2018, 03:33
by onemanosx
broadw3ll, your card is at PCI0.PEG0.PEGP

I patched DSDT for you,. Please try.
DSDT.aml.zip

DSDT Patch Request

Posted: 21 Dec 2018, 05:27
by broadw3ll
Yes it is "PCI0.PEG0.PEGP" but i can't find were i have to apply that patch. Thanx for the patch but the brightness or the battery indicator still doesnt work... thanx for the help my friend

DSDT Patch Request

Posted: 21 Dec 2018, 05:57
by onemanosx
You still need to use injector kext as per the guide you posted.

Edit: You probably need to rename GFX0 to IGPU, too.
Screenshot 2018-12-21 at 2.34.35 PM.png