DSDT patch requests

Razormane · Post by **Razormane** » 04 May 2019, 18:43

[Local Link Removed for Guests] wrote: [Local Link Removed for Guests]
04 May 2019, 18:24
Razormane, EXTRACT NEW SEND_ME

Ok

kitaro74 · Post by **kitaro74** » 04 May 2019, 19:29

Hello MaLd0n,

My configuration:
Gigabyte EP45-DS3 F9, Intel Core 2 Quad Q9300, 8 GB DDR2, SSD Kingston A400 240GB, NVIDIA GeForce GTX 670 2GB DDR5

I use your advice from PM and installed 10.13.6 High Sierra (17G6030). After few boots from usb stick with kernel panics I managed to reach installer screen. Today I bought a 240GB SSD and proceed to install. Finally I succeded. Everything seem to work. Network works, Sound works (thru bluetooth adapter because I use a bluetooth speaker and bluetooth headphones), Video works with Nvidia driver downloaded with nvidia-updater.sh. I don't know how to test 3D graphics if works.

What I noticed is after nvidia driver install, in "About This Mac" video card appear with 1024 MB. Before installing driver it showed 2048 MB
CPU details did not match also.

When I connect a flash drive to my USB hub connected to my display I receive the following message.

If I connect to the USB port from the back of my PC, the flash drive is mounted.

I attached SendMe file. Thanks!

platinumsteel · Post by **platinumsteel** » 04 May 2019, 22:27

Hi again Maldon..I am kindly requesting a dsdt in behalf of my friend ...His specs are Giabyte Z390 + i7 9700K+ RX 580

Send me HANNANs-iMac.zip

mero121212 · Post by **mero121212** » 04 May 2019, 23:05

hi patch me please..

hawkins1986 · Post by **hawkins1986** » 05 May 2019, 01:29

Trying to get my battery icon to work. I tried to attach zip it says file to large.

MaLd0n · Post by **MaLd0n** » 05 May 2019, 01:35

papa, post one photo, error screen

Added in 1 minute 4 seconds:
Razormane,

DSDT.aml.zip

Added in 10 minutes 47 seconds:
kitaro74,

DSDT.aml.zip

Added in 4 minutes 1 second:
platinumsteel,

DSDT.aml.zip

papa · Post by **papa** » 05 May 2019, 01:54

Hi MaLdOn ,

attached IMAGE and link for all the boot process capture with console you can see all the error there!
[External Link Removed for Guests]

Thanks!

MaLd0n · Post by **MaLd0n** » 05 May 2019, 01:55

mero121212,

DSDT.aml.zip

Added in 16 seconds:
hawkins1986, [Local Link Removed for Guests]

Added in 3 minutes 26 seconds:
papa, wrong Power Management
use it

NullCPUPowerManagement.kext.zip

remove ssdt and read about PM in ur chipset

papa · Post by **papa** » 05 May 2019, 03:04

[Local Link Removed for Guests] wrote: [Local Link Removed for Guests]
05 May 2019, 01:59
papa, wrong Power Management
use it
NullCPUPowerManagement.kext.zip
(9.42 KiB) Not downloaded yet
remove ssdt and read about PM in ur chipset

it works now but i don't know how to remove ssdt?
tick "Drop OEM" in Clover Configurator is that o.k?

also I am trying to enable hardware encoding
when i'm changing in the bios to vga off board i'm getting black screen
please advice...

All Best,

jamesbit · Post by **jamesbit** » 05 May 2019, 03:34

Hi !
I have a motherboard ASUS P8H61-I/RM/SI with Cpu i7 2600K.
I have everything working except the sleep !
Please hel me to fix my Original DSDT.
Thank you...

All best...

Razormane · Post by **Razormane** » 05 May 2019, 06:42

[Local Link Removed for Guests] wrote: [Local Link Removed for Guests]
05 May 2019, 01:51

Added in 1 minute 4 seconds:
Razormane, DSDT.aml.zip

Thanks! Now sleeps normally, but wakens only after clicking of the physical button. The only thing only ceased to waken from Bluetooth of the keyboard and Mouse Apple. Though perhaps so even it is more convenient as phantom clicking is excluded, but here on the keyboard for example I would leave awakening and as separately most likely it is impossible, it is possible to correct it somehow? And in general thanks a lot!

rowl3y · Post by **rowl3y** » 05 May 2019, 08:46

Hi ,

Here is me RunMe file ..

[External Link Removed for Guests]

Thanks

MaLd0n · Post by **MaLd0n** » 05 May 2019, 13:04

papa, ur processor don't have GPU

Added in 6 minutes 54 seconds:
jamesbit,

DSDT.aml.zip

sleep in serie 6 and x79 don't work in many cases

generate one ssdt for ur pm, use a correct renamed in config.plist, check olarila clover folder for ur chipset, serie5,6,7,8,9

Added in 1 minute 1 second:
Razormane, wake from mouse or keyboard don't work?

Added in 3 minutes 19 seconds:
rowl3y,

DSDT.aml.zip

gencis · Post by **gencis** » 05 May 2019, 14:29

Hi Team,

Please help me a DSDT , basically everything kinda word except iMessage.

jamesbit · Post by **jamesbit** » 05 May 2019, 14:41

[Local Link Removed for Guests] wrote: [Local Link Removed for Guests]
05 May 2019, 13:15
papa, ur processor don't have GPU

Added in 6 minutes 54 seconds:
jamesbit, DSDT.aml.zip
sleep in serie 6 and x79 don't work in many cases

generate one ssdt for ur pm, use a correct renamed in config.plist, check olarila clover folder for ur chipset, serie5,6,7,8,9

Added in 1 minute 1 second:
Razormane, wake from mouse or keyboard don't work?

Added in 3 minutes 19 seconds:
rowl3y, DSDT.aml.zip

Thank you MaLd0n but your DSDT don't work !
It won't boot !

MaLd0n · Post by **MaLd0n** » 05 May 2019, 14:43

gencis,

DSDT.aml.zip

imessage u need a valid serial

Added in 27 seconds:
jamesbit, u need a correct config.plist

yunder · Post by **yunder** » 05 May 2019, 14:44

Olá Mald0n,

Consegui efetuar a instalação (finalmente, graças a ajuda do fórum), estou anexando o zip do send me file para config corretas das DSDTs.
Consegui configuração com video, USB e rede, mas audio, ainda não tive sucesso mesmo fazendo as configs.

Minha config:
CPU: i7-9700k
MOBO: Gigabyte Aorus Z370M Gaming-CP (rev. 01)
GPU: Nvidia 970 GTX

Grato pela ajuda.

Abraxx

Yunder

MaLd0n · Post by **MaLd0n** » 05 May 2019, 14:45

yunder, anexa o send_me

yunder · Post by **yunder** » 05 May 2019, 14:52

[Local Link Removed for Guests] wrote: [Local Link Removed for Guests]
05 May 2019, 14:45
yunder, anexa o send_me

Anexado no post anterior. Grato Mald0n
Depois qual tutorial para atualizar a config? É dentro do Clover Configurator?

Abrax

MaLd0n · Post by **MaLd0n** » 05 May 2019, 14:58

yunder,

DSDT.aml.zip

veja a config correta na pasta Olarila clover folder para os chipsets 100/200/300

Audio
[Local Link Removed for Guests]