- I don't what to use Heliport for Wifi and Airportitlwm support highest version is Sonoma 14.4

- It had widget can move to desktop

- It had dyamic wallpaper

So who had MacOS Sonoma 14.4 raw file please send me!

Support Olarila Vanilla Hackintosh by making a donation HERE

About Premium Users you can check HERE

Some Basic Information

-Use USB2 port for easy installation with no remap USB

-If you have only IGPU use -igfxvesa bootarg for easy installation

-Delete old EFI folder and paste new. Don't use merge files

-Don't use Drag and Drop into EFI partition. Use Copy/Paste instead

-Reset NVRAM one time - OpenCore use entry "Reset Nvram" / Clover use F11 key on boot screen

Bios/UEFI Configuration

-Sata = AHCI mode

-Secure Boot = Disable if need

-CSM = Disable with AMD cards

*If you used SSDT instead DSDT uncheck RebaseRegions in Acpi tab

*You can request one full ACPI solution HERE and Premium Users HERE

*After installation you need remove unnecessary files like unused Lan kexts

*If your GPU don't need agdpmod=pikera, remove this bootarg

*If your LAN card don't need dk.e1000=0 and e1000=0, remove these bootargs

*Users with IGPU need change SMBIOS (example: for Skylake Processor change smbios iMacPro1,1 to iMac17,1)

*Generate a good and valid serial for you

Step 1 - Downloading Olarila Vanilla Images or Create one Vanilla USB Installer

1a) Olarila Images (Windows, Mac or Linux)
https://www.olarila.com/topic/6278-hackintosh-and-macintosh-olarila-vanilla-images-macos/

1b) How to create USB Installer (Mac)
https://www.olarila.com/topic/6185-guide-how-to-create-personal-vanilla-macos-image-or-usb-installer/

Step 2 - Burning Olarila Images with Balena Etcher (Windows, Mac or Linux)

2a) Download Link https://www.balena.io/etcher/

Step 3 - Downloading correct EFI folder for your hardware (Clover or OpenCore)

3a) https://www.olarila.com/topic/5676-hackintosh-efi-folders-for-all-chipsets-clover-and-opencore/

Step 4 - Copying EFI folder to USB EFI partition (Mac or Windows)

4a) https://www.olarila.com/topic/12857-hackintosh-how-to-mount-efi-partition-on-macos-or-windows/

Step 5 - Formatting SSD on Installer

5a) On Disk Utility Change "View" options to "Show All Devices"

5b) Selecting and formatting SSD. Use GUID and APFS

Step 6 - Copying EFI folder to SSD EFI partition after Installation

6a) https://www.olarila.com/topic/12857-hackintosh-how-to-mount-efi-partition-on-macos-or-windows/

Step 7 - Starting a real fine tune with full ACPI solution

7a) Extracting full Dump with RunMe.app

https://www.olarila.com/topic/10301-hackintosh-olarila-runme-dumper-app/

7b) Posting full dump for one full ACPI solution

-Donators and Premium users have a personal room for that. Check link bellow.

https://www.olarila.com/forum/84-dsdt-patch-requests/

-Check link bellow about Premium and Donators users

https://www.olarila.com/topic/7717-important-premium-and-donators-users/

-DSDT patch requests (Post in this topic if you want FULL DSDT patched, please don't open a new topic, unless you are trying to learn how to do it yourself and need help.)

Step 8 - USB Port Mapping

8a) https://www.olarila.com/topic/14220-hackintosh-usb-port-mapping-guide-2021-mojave-catalina-bigsur-monterey/

Step 9 - Dual Boot with OpenCore and Full ACPI Solution

9a) With Official OpenCore

https://www.olarila.com/topic/13019-hackintosh-dual-boot-with-opencore-with-full-acpi-and-real-vanilla-solution/

9b) With MOD Opencore

https://www.olarila.com/topic/24542-opencore_no_acpi-opencore-with-additional-featureschanges-implemented/

Step 10 - How to update OpenCore bootloader

10a) https://www.olarila.com/topic/14268-how-to-update-opencore-bootloader-on-hackintosh-easy-and-fast-way/

Credits: 

Slice, Kabyl, usr-sse2, jadran, Blackosx, dmazar, STLVNUB, pcj, apianti, JrCs, pene, FrodoKenny, skoczy, ycr.ru, Oscar09, xsmile, SoThOr, RehabMan, Download-Fritz, Zenit432, cecekpawon, Intel, Apple, Oracle, Chameleon Team, crazybirdy, Mieze, Mirone, Oldnapalm, netkas, Elconiglio, artut-pt, ErmaC, Pavo, Toleda, Master Chief and family, bcc9, The King, PMheart, Sherlocks, Micky1979, vit9696, vandroiy2013, Voodoo Team, Pike R. Alpha, lvs1974, Austere.J, CVad, headkaze, onemanosx, erroruser, Jenny David, Sampath007, Facebook Hackintosh community, Facebook Olarila community and many, many, many others!

here's the dilemma .

No matter, what I do I can't boot / start installation process from Balena Etcher flashed Olarila Mavericks.raw file .

The usb - pendrive just isn't in the BIOS - boot options .

I have tried copying OC SandyBridge EFI - files to the EFI - partition .

Just ain't working .

What's happening here, "that isn't" .

/ Toni .

I've tried flashing two USB - pendrives, with Olarila Sequoia using BalenaEtcher, which successfully flashed and valitadet .

When I try and select to boot off from the disks, they just bounce once in the boot devices menu and nothing happens .

I have tried both USB2 and USB3 - ports and the BIOS is set up correctly (???), based on a web-search with keywords MSI Z390 A-Pro Hackintosh BIOS - options .

Please some HELP here,

/ Toni .

Download Mavericks for VMware HERE - SHA1 d8e851d5865bb26f407d290440a2584c0570ed85

Credits Apple, mavericksforever and Broadcom.

Download VirtualBox HERE

Download VirtualBox Extension Pack HERE

1- Install VirtualBox and VirtualBox Extension Pack.

2- Run VirtualBox then go to New.

3- Put one name on VM and select iso image.

4- Select best hardware configuration for your VM.

5- Start Installation.

Enjoy!

This issue specifically concerns macOS Sequoia 15.7.4

The problem is that neither SMBIOS MacPro7,1 nor SMBIOS iMac 19,1 allows a BT4.0 USB Bluetooth adapter to work.

A UART BT device (ghost device) is always displayed, which doesn't actually exist, see here from the system report - Bluetooth:

Bluetooth Controller:

Address: NULL

Status: Off

Chipset: BCM_4350C2

Visible: Off

Firmware Version: v0 c0

Supported Services: 0x392039 < HFP AVRCP A2DP HID Braille LEA AACP GATT SerialPort >

Transport: UART
Vendor ID: 0x004C (Apple)

I checked ChatGPT, but it only gives nonsense.

Does anyone here perhaps have the same motherboard and use Bluetooth?

I'm grateful for any help.

My Bluetooth USB dongle is a:

BCM920702 Bluetooth 4.0:

Product ID: 0x21e8
Manufacturer ID: 0x0a5c (Broadcom Corp.)
Version: 1.12
Serial Number: 5CF3706681C8
Speed: Up to 12 Mbps
Manufacturer: Broadcom Corp.
Site ID: 0x14500000 / 2
Available Current (mA): 500
Additional Operating Current (mA): 0
Integrated: Yes

It is also correctly mapped internally to USB port HS09 using Hackintool, with port 255.

Pack with Apps for Mavericks with best Web Browser, App Cleaner, etc HERE

I'm using VMware Fusion on macOS.

Download Mavericks for VMware HERE - SHA1 ed5389300b7e420d86e2870225898d46e976e0bd

Credits Apple, mavericksforever and Broadcom.

1- Run VMware Fusion then drag Mavericks on this.

2- Change whatever you need about Processor, Memory and Disk.

3- Disable Side Channel Mitigations if need in Advanced tab.

4- In some cases need change USB settings to USB 2.0 in preferences.

5- Go to installation.

6- Install VMware Tools then reboot. Download darwinPre15.iso.zip 

Enjoy!

16gb ddr5 ram

nvidia rtx 5060

I want iGPU support.

I'm new here and been just using olarila for a while, I noticed the installation image for Sequoia 15.7.3 is damaged, is there any possibility to reupload or i'll have to find it elsewhere??

I downloaded the file twice from mediafire from the link of this post and seems it doesn't work

Sorry i don't know how to provide image here but here is the proof

OpenCore Vanilla Guide HERE

Useful Links HERE

Hello ppl, let's start

1- Download Vanilla Olarila Image or Create your personal Vanilla USB Stick

https://tinyurl.com/1o7dx4nz

*After Download, extract image

2- Formatting USB Stick

3- Burn Olarila Image

a-MacOS / Windows / Linux with Etcher

*** Download Etcher | Use version from link below ***

https://tinyurl.com/352frf47

*Open app and select extracted Image

*Select USB Stick(use 16gb USB stick)

*Burn Image

b-Burn Olarila image on Windows with Win32DiskImager

*Download Win32DiskImager

https://tinyurl.com/472mseat

Format USB Stick

Open Win 32 Disk Imager

Load Olarila Image

Burn

4- Boot from USB

*Use boot key(Gigabyte is F12, Asus is F8, etc)

*Select Boot MacOS Install from Olarila Image

*Notebooks users, if default config.plist fail use config2.plist, press O key in Clover boot screen, go to Configs

*Select config2.plist

5- Formatting SSD

*Go to Disk Utility, "View"

*Select "Show All Devices"

*Format SSD, use APFS, GUID and go to installation

*After installation, boot from USB stick again, use boot key and select your SSD with system installed

6- Start a Post Installation

*Go to Olarila Image/Files folder and run "Olarila Repair app"

if u like File Vault, don't run it

https://tinyurl.com/sbgelrce

7- Copy Olarila EFI folder to EFI partition

*Download EFI folder for your Chipset

https://tinyurl.com/dwrtbp8r

*Copy EFI folder to /Volumes/EFI (don't reboot)

a-Video Patch

https://tinyurl.com/3dmg2thu

b- Embedded Controller Device

Catalina users check Name _HID "PNP0C09" in your DSDT and rename to EC via Clover/OpenCore Acpi rename.

if you using Olarila folders don't need rename

Quote

change EC0 to EC
4543305f 
45435f5f 

change H_EC to EC
485f4543 
45435f5f 

change ECDV to EC
45434456 
45435f5f

8- Install Clover Bootloader in SSD

https://tinyurl.com/ubyaea2

*Mobos UEFI - you don't need install Clover, just paste Olarila folder for your Chipset into ESP/EFI partition and reboot!

*Mobos Bios - after paste Olarila folder into EFI partition, install Clover with this options bellow!

*Reboot

9- Fine Tune, DSDT

Quote

DSDT (Differentiated System Description Table) is a part of the ACPI specification. It supplies information about supported power events in a given system. ACPI tables are provided in firmware from the manufacturer. A common MacOS problem is missing ACPI functionality, such as: fans not running, screens not turning off when the lid is closed, shutdown, boot fast without any ACPI error or warnings, sata, usb, firewire conflicts, etc. This can stem from DSDTs made with Windows specifically in mind, which can be patched after installation.

*Go to topic "DSDT patch requests" and read instructions, post your files there

https://tinyurl.com/5dfv6t4q

*Paste edited DSDT.aml in CLOVER/ACPI/PATCHED or OC/ACPI folder

*Reboot

-Olarila common patches for one perfect Hackintosh

Quote

--DSDT Patches--

-FIX ERRORS AND WARNINGS

-FIX ACPI ERRORS

-REMOVE UNUSED SCOPES / DEVICES

-HIGH PRECISION EVENT TIMER

-SATA SERIE ID

-DMAC

-REMOVE LINES, PROBLEMATIC and UNUSED

-FIX K.P in REBOOT

-NVRAM

-REAL TIME CLOCK

-SLPB

-DARWIN / WINDOWS 2015

-XHCI

-PLUGIN TYPE

-HDAS to HDEF

-HDEF

-ARTC

-IPIC

-TIMR

-SBUS

-BUS1

-MCHC

-ALS0

-SHUTDOWN

-UAR1

-LAN

-FWHD

-USBX

-PMCR

-PPMC

-XSPI

-GMM

-IMEI

-EC

-PNLF

-ARPT

-GFX0

-NVME

-DTGP

-ACQUIRE MUT0 0XFFFF

-OPERATION REGION GPIO

-MUTEX MUT0 0x00

-EXTERNAL REFERENCES

-UNKNOWNOBJ

-HDMI / HDAU

-FULL RENAMED DEVICES

--Useful Links--

https://tinyurl.com/8dnvqs5u

-Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders!

Slice, Kabyl, usr-sse2, jadran, Blackosx, dmazar, STLVNUB, pcj, apianti, JrCs, pene, FrodoKenny, skoczy, ycr.ru, Oscar09, xsmile, SoThOr, RehabMan, Download-Fritz, Zenit432, cecekpawon, Intel, Apple, Oracle, Chameleon Team, crazybirdy, Mieze, Mirone, Oldnapalm, netkas, Elconiglio, artut-pt, ErmaC, Pavo, Toleda, Master Chief and family, bcc9, The King, PMheart, Sherlocks, Micky1979, vit9696, vandroiy2013, Voodoo Team, Pike R. Alpha, lvs1974, Austere.J, CVad, headkaze, onemanosx, erroruser, Jenny David, Sampath007, Facebook Hackintosh community, Facebook Olarila community and many, many, many others!

We're all here to have fun and learn from each other!

I cannot use hdmi port on rx570 4gb as default with Catalina os,while displey port is working normaly when I use hdmi to dp converter.

My specs is:

asrock h510m-hdv/m.2

RX 570 4GB

32gb ram

120 gb ssd

Model Name:    Mac Pro
  Model Identifier:    MacPro7,1
  Processor Name:    6-Core Intel Core i5
  Processor Speed:    2,9 GHz
  Number of Processors:    1
  Total Number of Cores:    6
  L2 Cache (per Core):    256 KB
  L3 Cache:    12 MB
  Hyper-Threading Technology:    Enabled
  Memory:    32 GB
  Boot ROM Version:    2087.0.0.0.0
  Serial Number (system):    F5KZ40VBP7QM
  Hardware UUID:    B80EEAAA-0FF3-53F8-AECF-9847373D6D14

Here is my config.Plist

config.plist.zip

I installed mac Monterey on this machine:

asrock h510m-hdv/m.2

RX 570 4GB

32gb ram

120 gb ssd

i copied efi downloaded from olarila cometlake section to ssd and after first boot it does not recognized mouse and keyboard.

From installation usb when i start it recognized.

What should i do next?

Here is config.plist which i made it.

I need good dsdt too.

config.plist.zip

https://github.com/SunMe1977/hackintosh-ZOTAC-MAGNUS-ONE-ZBOX-ECM73070C

-Support Olarila Vanilla Hackintosh by making a donation HERE

-About Premium Users you can check HERE

-Problems with Paypal HERE

-Installation Guide HERE

-Hackintosh EFI folders HERE

-Hackintosh USB Remap HERE

-How to update OpenCore and Kexts HERE

-Guides and Tutorials HERE

Some Basic Information

-Bios/UEFI in full default settings, just disable secure boot

-You can use -igfxvesa bootarg for easy installation

-Delete old EFI folder and paste new. Don't use merge files

-Don't use Drag and Drop into EFI partition. Use Copy/Paste instead

-Reset NVRAM one time - OpenCore use entry "Reset Nvram" / Clover use F11 key on boot screen

Bios/UEFI Configuration check HERE

a) If you used SSDT instead DSDT uncheck RebaseRegions in Acpi tab

b) You can request one full ACPI solution HERE and Premium Users HERE

c) After installation you need remove unnecessary files like unused Lan kexts

d) Generate a good and valid serial for you

Step 1 - Downloading Olarila Vanilla Images or Create one Vanilla USB Installer

1a) Olarila Images (Windows, Mac or Linux) HERE

1b) How to create USB Installer (Mac) HERE

Step 2 - Burning Olarila Images with Balena Etcher (Windows, Mac or Linux)

2a) Download Link HERE

Step 3 - Downloading correct EFI folder for your hardware

-NoteBook SandyBridge Download HERE

-NoteBook IvyBridge Download HERE

-NoteBook Haswell Download HERE

-NoteBook Broadwell Download HERE

-NoteBook SkyLake Download HERE

-NoteBook SkyLake for macOS Ventura+ Download HERE

-NoteBook KabyLake Download HERE

-NoteBook CoffeeLake and WhiskeyLake Download HERE

-NoteBook CoffeeLake Plus and CometLake Download HERE

-NoteBook IceLake Download HERE

-NoteBook 12th, 13th and 14th Gen Download HERE (Need disable Hyper-Threading) 

-NoteBook TigerLake Download HERE

Step 4 - Copying EFI folder to USB EFI partition (Mac or Windows) HERE

Step 5 - Formatting SSD on Installer

5a) On Disk Utility Change "View" options to "Show All Devices"

5b) Selecting and formatting SSD. Use GUID and APFS

Step 6 - Copying EFI folder to SSD EFI partition after Installation HERE

Step 7 - USB Port Mapping HERE

Step 8 - How to update OpenCore bootloader HERE

Step 9 - How to generate SMBIOS and Serial on Hackintosh HERE

Step 10 - Mobile Intel HD Graphics HERE

Credits: 

Slice, Kabyl, usr-sse2, jadran, Blackosx, dmazar, STLVNUB, pcj, apianti, JrCs, pene, FrodoKenny, skoczy, ycr.ru, Oscar09, xsmile, SoThOr, RehabMan, Download-Fritz, Zenit432, cecekpawon, Intel, Apple, Oracle, Chameleon Team, crazybirdy, Mieze, Mirone, Oldnapalm, netkas, Elconiglio, artut-pt, ErmaC, Pavo, Toleda, Master Chief and family, bcc9, The King, PMheart, Sherlocks, Micky1979, vit9696, vandroiy2013, Voodoo Team, Pike R. Alpha, lvs1974, Austere.J, CVad, headkaze, onemanosx, erroruser, Jenny David, Sampath007, Facebook Hackintosh community, Facebook Olarila community and many, many, many others!

We're all here to have fun and learn from each other! That's all Folks!

Before this problem occured i had some other error like stuck on a remaining minute( waiting like 6 - 10hours, like 6-7 time trying)

Then im updated my opencore and latest kext then this error occured.

here i linked with my efi

https://mega.nz/file/TAtwFRSS#JGKhenTKlCnfBm5eD4u6YPve-Rnygj05M1kKDE3Emb8

Some Pc Detail here

Motherboard: Aorus Elite B550M 1.3 version

Cpu: AMD Ryzen 7 5700G

Gpu: AMD RX6700XT

Os:Mac OS Sequoia

Noted: Motherboard bios already updated to latest which FG version,opencore to the latest version 1.0.6 

if you can help fix my efi..

Thanks, nazrimu