Mavericks on HP Sleekbook-14 from Clover USB partial success

Mavericks on HP Sleekbook-14 from Clover USB partial success

Postby paaguti » 21 Dec 2014, 09:34

Hi folks,

I'm nearly there...
I downloaded and transfered the 10.9.5 USB Installer with Clover. To kix screen, etc. I used the config.plist from https://github.com/RehabMan/OS-X-Clover ... Config.git that fits my slekbook best. I get to the install screen but I don't have keyboard. Any ideas?

This is my lspci

00:00.0 Host bridge: Intel Corporation 3rd Gen Core processor DRAM Controller (rev 09)
00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09)
00:14.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller (rev 04)
00:16.0 Communication controller: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 (rev 04)
00:1a.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 (rev 04)
00:1b.0 Audio device: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller (rev 04)
00:1c.0 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 (rev c4)
00:1c.1 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 2 (rev c4)
00:1c.2 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 3 (rev c4)
00:1d.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 (rev 04)
00:1f.0 ISA bridge: Intel Corporation HM77 Express Chipset LPC Controller (rev 04)
00:1f.2 RAID bus controller: Intel Corporation 82801 Mobile SATA Controller [RAID mode] (rev 04)
00:1f.3 SMBus: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller (rev 04)
01:00.0 Network controller: Qualcomm Atheros QCA9565 / AR9565 Wireless Network Adapter (rev 01)
02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 05)

Additional info:

from cpuid

(synth) = Intel Core i3-3000 (Ivy Bridge L1) / i5-3000 (Ivy Bridge E1/N0/L1) / i7-3000 (Ivy Bridge E1), 22nm
CPU 3:
vendor_id = "GenuineIntel"
version information (1/eax):
processor type = primary processor (0)
family = Intel Pentium Pro/II/III/Celeron/Core/Core 2/Atom, AMD Athlon/Duron, Cyrix M2, VIA C3 (6)
model = 0xa (10)
stepping id = 0x9 (9)
extended family = 0x0 (0)
extended model = 0x3 (3)
(simple synth) = Intel Core i3-3000 (Ivy Bridge L1) / i5-3000 (Ivy Bridge E1/N0/L1) / i7-3000 (Ivy Bridge E1) / Mobile Core i3-3000 (Ivy Bridge L1) / i5-3000 (Ivy Bridge L1) / Mobile Core i7-3000 (Ivy Bridge E1/L1) / Xeon E3-1200 v2 (Ivy Bridge E1/N0/L1) / Pentium G1600/G2000/G2100 (Ivy Bridge P0) / Pentium 900/1000/2000/2100 (P0), 22nm
miscellaneous (1/ebx):
process local APIC physical ID = 0x3 (3)
cpu count = 0x10 (16)
CLFLUSH line size = 0x8 (8)
brand index = 0x0 (0)

I have 6 gig RAM on the machine.
Last edited by paaguti on 30 Dec 2014, 08:33, edited 1 time in total.
paaguti
 
Posts: 12
Joined: 28 Jun 2011, 12:52
Location: Madrid
CPU: i5
Motherboard: hp sleekbook
GPU: hd4000

Re: Mavericks USB Clover on HP Sleekbook

Postby mendietinha » 21 Dec 2014, 16:02

you need a ps2 kext. probably voodoops2 from rehabman.
Se quando viaja faz o que quer, quando viajar, não leve a mulher
.
Core I5 750 12gb 500gb GTX 760(macOS 10.12, macOS 10.12.Xb, Win10)
Pentium 4 3.06 2gb 80gb fx5200 (10.5.8)
iMac G3 400Mhz 512mb Rage 8Mb (10.4.11)

Save OSX86... Don't Let Tony win!
User avatar
mendietinha
Staff
 
Posts: 1187
Joined: 27 Dec 2010, 15:18
CPU: i5 750
Motherboard: Intel
GPU: GTX760

Re: Mavericks USB Clover on HP Sleekbook

Postby paaguti » 22 Dec 2014, 07:34

Hi,

I have the original 10.9.5 installer image I got through the forum and it seems to have the Voodoo keyboard extensions:

paag@HP-Sleekbook:~$ ls /mnt/EFI/CLOVER/kexts/10.9/
AHCIPortInjector.kext GenericUSBXHCI.kext VoodooPS2Mouse.kext
AppleACPIPS2Nub.kext IOAHCIBlockStorageInjector.kext VoodooPS2Trackpad.kext
Disabler.kext VoodooPS2Controller.kext
FakeSMC.kext VoodooPS2Keyboard.kext

I have read somewhere that the HP's need a special config.plist for Voodoo. Someone aware of that?
paaguti
 
Posts: 12
Joined: 28 Jun 2011, 12:52
Location: Madrid
CPU: i5
Motherboard: hp sleekbook
GPU: hd4000

Re: Mavericks USB Clover on HP Sleekbook

Postby artur-pt » 22 Dec 2014, 09:13

hello

maybe u must use this one

delete the others

https://bitbucket.org/RehabMan/os-x-voo ... /downloads

good hack
PB Easy Note TM 86 - i5 430 M - H55M - Ram - 6 GB - Alc272 - Radeon HD 5470 512 QE/CI
Lenovo G500 - i5 3230m - HM77 - Ram - 8 GB - Conexant audio - HD 4000
My OS X Files - join me at irc.freenode.net/##olarila
User avatar
artur-pt
Staff
 
Posts: 4933
Joined: 24 May 2011, 12:04

Re: Mavericks USB Clover on HP Sleekbook

Postby paaguti » 23 Dec 2014, 09:10

Hi, thanks for the advice.

First try:

Remove ApplePS2* and Voodoo* from EFI/CLOVER/kexts/10.9 and install recommended VoodooPS2 there. Boot with injected kexts and no cache... still waiting for Bluetooth mouse and keyboard. however, mouse pointer appears and can be moved with the trackpad...

:-(

I didn't install the Daemon nor the launcher, though
paaguti
 
Posts: 12
Joined: 28 Jun 2011, 12:52
Location: Madrid
CPU: i5
Motherboard: hp sleekbook
GPU: hd4000

Re: Mavericks USB Clover on HP Sleekbook

Postby artur-pt » 23 Dec 2014, 10:10

hello

u must explain what is ur achieve .. bluetooth devices ?

for that u don't need ps2 kext .. but a working bluetooth .. so must read about ur bluetooth

good hack
PB Easy Note TM 86 - i5 430 M - H55M - Ram - 6 GB - Alc272 - Radeon HD 5470 512 QE/CI
Lenovo G500 - i5 3230m - HM77 - Ram - 8 GB - Conexant audio - HD 4000
My OS X Files - join me at irc.freenode.net/##olarila
User avatar
artur-pt
Staff
 
Posts: 4933
Joined: 24 May 2011, 12:04

Re: Mavericks USB Clover on HP Sleekbook

Postby paaguti » 23 Dec 2014, 16:16

Hi,

Sorry if I didn't write a clearer description... I achieve two things: the pointer responds but then the screen shows the bluetooth mouse and keyboards and how you have to switch them on. It seems to get stuck waiting for the keyboard. I have tested and I do have keyboard in single user mode.

Should I try to remove the VoodooPS2 kext from EFI/CLOVER/kexts/10.9 and install it on S/L/E on the USB stick, including the daemon?

Thanks for bearing with me :-)
paaguti
 
Posts: 12
Joined: 28 Jun 2011, 12:52
Location: Madrid
CPU: i5
Motherboard: hp sleekbook
GPU: hd4000

Re: Mavericks USB Clover on HP Sleekbook

Postby artur-pt » 23 Dec 2014, 20:19

hello

u stuck in a screen with a keyboard ? is that in installer ..

if so use a usb keyboard to go on..

good hack
PB Easy Note TM 86 - i5 430 M - H55M - Ram - 6 GB - Alc272 - Radeon HD 5470 512 QE/CI
Lenovo G500 - i5 3230m - HM77 - Ram - 8 GB - Conexant audio - HD 4000
My OS X Files - join me at irc.freenode.net/##olarila
User avatar
artur-pt
Staff
 
Posts: 4933
Joined: 24 May 2011, 12:04

Re: Mavericks USB Clover on HP Sleekbook

Postby mendietinha » 23 Dec 2014, 21:03

sometimes hitting space a few times do the trick.

space or enter or esc. i can´t remember wich one.
Se quando viaja faz o que quer, quando viajar, não leve a mulher
.
Core I5 750 12gb 500gb GTX 760(macOS 10.12, macOS 10.12.Xb, Win10)
Pentium 4 3.06 2gb 80gb fx5200 (10.5.8)
iMac G3 400Mhz 512mb Rage 8Mb (10.4.11)

Save OSX86... Don't Let Tony win!
User avatar
mendietinha
Staff
 
Posts: 1187
Joined: 27 Dec 2010, 15:18
CPU: i5 750
Motherboard: Intel
GPU: GTX760

Re: Mavericks USB Clover on HP Sleekbook

Postby paaguti » 24 Dec 2014, 16:41

Thanks a ton! That was the clue!

I have Mavericks installed and running. Now I have to find the drivers for my USB WiFi, then the DSDT for the power button, the sound, etc. But at least I can start managing my iPods again :-)
paaguti
 
Posts: 12
Joined: 28 Jun 2011, 12:52
Location: Madrid
CPU: i5
Motherboard: hp sleekbook
GPU: hd4000

Next

Return to Mavericks (10.9)

Who is online

Users browsing this forum: No registered users and 1 guest