olarila.com

It does load. I have no idea how to solve the problem.

_________________
ASUS N53Jq • CPU: Intel Core i7-740QM 1.73GHz • RAM: 6,0GB • HD: 500GB • GPU: GeForce GT 425M 1GB 1920x1080 • OS: OS X 10.8.3 • Linux Mint 14 • Windows 8

You're right! It does not load SSDT.aml but i read somewhere that's not important. I'm going to try to follow this tutorial again:
http://olarila.com/forum/viewtopic.php?f=17&t=134

A few question though;
1: do you have got an installer for chameleon for me? the link (in the link) is dead (described in the tutorial).
2: after installing "Extra Lion*" and "Chameleon". to usb drive, do i have to patch and copy the DSDT.aml?

Thank you for helping. Hope i can get the installer working. Read a lot of posts on the internet of people trying to get this working on a n53sv.

1: I added a local link viewtopic.php?f=9&t=70

2: Yes.

I would patch with EHCI and IRQs for Sandy Bridge notebooks instead of using N73SV patch viewtopic.php?f=19&t=634

_________________
ASUS N53Jq • CPU: Intel Core i7-740QM 1.73GHz • RAM: 6,0GB • HD: 500GB • GPU: GeForce GT 425M 1GB 1920x1080 • OS: OS X 10.8.3 • Linux Mint 14 • Windows 8

Thank you so much! Going to try the tutorial again tomorrow, using the chameleon you added and going to patch the dsdt with those 2 ehci and irq. I will let you know if i can reach the installer tomorrow Thanks!

I followed the tutorial again. Installation of this Chameleon was different then before. It looks better then before

After installing " Extra Lion DP4" and "Chameleon" i patched my ~dsdt.aml.
First i tried to patch it with EHCI.txt. It gave me some errors;

Code:

10:43:27: Compiling and checking compiler errors...
10:43:34: First compile errors: 2
10:43:34: Fixing errors...
10:43:42: Second compile errors: 2
10:43:42: Compiling again...
10:43:49: Third compile errors: 2
10:43:49: Errors persisted all fixing tentatives, please post this log at olarila.com forums
[[Line 4919 type Error message Object does not exist (DTGP)], [Line 5001 type Error message Object does not exist (DTGP)]]
10:43:49: Aborted, compilation failed

After this it created 2 new files; dsdt.dsl and dsdt.aml. I used dsdt.dsl instead of my ~dsdt.dsl and the patch IRQS.txt. This gave me no errors.

Code:

10:47:55: Decompiling DSDT...
10:47:55: Parsing DSL code...
10:47:59: Applying patches...
10:47:59: Saving the new DSL file...
10:48:02: Compiling and checking compiler errors...
10:48:09: First compile errors: 0
10:48:09: Saving AML to disk...

I saved this as DSDT.aml and copied it to the /Extra directory. Still waiting for root device. After this i removed the DSDT.aml file from /Extra and tried to boot the disk but also "still waiting for root device".

Any ideas? I have attached my ~dsdt.aml which is not patched.
I have Asus n53sv-sz404v (with Crucial M4 SSD 256GB 2.5" SATA600)

Thanks!

EHCI needs DTGP, so you should apply EHCI, DTGP and IRQs.

If it still doesn't work, I have no idea.

_________________
ASUS N53Jq • CPU: Intel Core i7-740QM 1.73GHz • RAM: 6,0GB • HD: 500GB • GPU: GeForce GT 425M 1GB 1920x1080 • OS: OS X 10.8.3 • Linux Mint 14 • Windows 8

I patched my original dsdt.aml file first with DTGP. No errors.
After that i patched it with EHCI. No errors.
After that i patched it with IRQs. No errors.

I tried to boot the USB disk and it loads more than before. Only now i get the error:


I also added a screenshot with a few errors.

When i Google this people says to use some flags. So i used the flags -v -x cpus=1 GraphicsEnabler=No
These flags didn't help. Could it be it has something to do with kext?

I found some boot files for N53SV here: http://www.osx86.net/downloads.php?do=file&id=2277
This contains a folder called Extensions in /Extra with a couple of kext. Maybe i could use them.

Or maybe i could do the following. Don't install "Extra Lion" but just copy this Extra folder with my own patched dsdt.aml file and then install Chameleon.

*edit*
I tried removing the Extra folder and copied the Extra folder from the link above. I replaced the dsdt.aml file with my own patched one. I installed Chameleon and booted the disk.

First time booting it loaded and gave me this image: http://i63.photobucket.com/albums/h123/sk8erdesign/erro-1.jpg.
I rebooted and started the USB disk again and i got a kernel panic.

Try removing Intel HD kexts from the USB installer (AppleIntelHD* and AppleIntelSNB*).

_________________
ASUS N53Jq • CPU: Intel Core i7-740QM 1.73GHz • RAM: 6,0GB • HD: 500GB • GPU: GeForce GT 425M 1GB 1920x1080 • OS: OS X 10.8.3 • Linux Mint 14 • Windows 8

I removed those files (i think it were 6 files).
When i started the disk i use only the flag "-v". The installer does not start on my USB3 port (it says: waiting for root device). When i try another USB2 port it starts the installer

Before the installer starts it shows the same "errors" as in my screenshot in my previous post. Don't know if that could cause problems. But the best thing is that the installer starts now Now i can go finish the tutorial (if no errors will occur) .

Thank you so much! If i can buy you a beer let me know

I have installed OS X.

When i copy the /Extra folder for MacBookPro8,1 or MacBookPro8,3 , install Chameleon and reboot it gives me a kernel panic. Can't even start it on safe-mode (flag -x)

When i use the /Extra folder on the USB disk (which i used for install) it boots but without any drivers. Screen 1024x768, no wlan or sound.